Jump to content

Lawchan marine tank part 2


lawchan77
 Share

Recommended Posts

  • SRC Member

just for the fun of it... cropped and added a border. keke...

IMG_2400_zpsb1b3e79d-1_zpsae566109.jpg

i'll be working on the scaping still.. all comments welcome.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

The scape look good to me, once u glue all the sps on the floor to the rock, it should look even better. The advanage of this scape is the flow will be a lot better and one will not need so many wavemaker.

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

I also prefer the old look for now. Maybe after your bonsai fully grow I will prefer your new look. Whatever the scape, glad to see you back. By the way, hows your hand?

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

Will continue to improve as I go along. Hand was getting better but after scape back to square one. Was stung by acro and had a reaction and slightly swollen. Wearing gloves is really inconvenient and doesn't work well with epoxy. Now dry and crack with no fingerprint lor.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

You damn hardcore !

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Takes a lot of hard work. Nice work there.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

I think your older FTS, if you crop the photo to hide the edges, might be able to pass off as taken underwater in the ocean.

just for the fun of it... cropped and added a border. keke...

IMG_2400_zpsb1b3e79d-1_zpsae566109.jpg

i'll be working on the scaping still.. all comments welcome.

Ah hah! There we go, now doesn't that look like something straight out of National Geographic?

Anyway love your new scape too, keep the pics comin.

P.S. I missed out on your radioactive birdnest that you accidentally fragged :(. Hope you frag again soon... accidentally of course, :lol: .

Link to comment
Share on other sites

  • SRC Member

Thanks bros

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Added some rocks today and slight relocation of a few coral.

With this set up, the fishes seem more active and water flow is better. No dead spots. Debris coagulate at 2 front side corners of the tank. Makes vacuuming a breeze.

Fts

0D623868-B057-4E52-8EDB-251BC0DA88FF-154

Right side

E427A2EB-8B0F-4DFD-ADE0-C2FC8C9F5344-154

Left side

99715BCA-7890-4516-907A-E2E26F044C2B-154

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Fire and ice

CFCC95A2-4D55-42AB-A248-98ABC1AF8246-154

Rainbow stylo

2801A74C-3704-436B-8FE2-24849FB5383D-154

Micromussa

00E1FF92-8CCB-4E9F-A9CF-329B795CABAF-154

Supersun garden

24AD8A72-7FAB-4260-ABF1-C5C4E625E619-154

Lemonade

32D993F8-4FB9-4620-A491-96C7F9D6CF17-154

Setosa

D9828AF7-49BC-49AA-9412-D81673C3FA21-154

Holy grail

2147E4F1-9401-48DB-A41B-B4C715E125DD-154

Royal blue Millie

52DDA981-BB91-447D-BC38-6C96ADF23DF1-154

Ssc

EE631B39-C593-4278-B7C7-8BE958D2346C-154

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Frag station holding some frags accidentally broke while working on the corals. :( Ssc, lemonade and fiber optic 4B9376E0-930C-4CC3-9B0D-B6CABD79E90D-154

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

That's all for the time being folks.... Taking some time off to recuperate my hand and let the water parameters stabilize. Need to TLC my hand.

1687198A-C43D-4ABD-A02A-E064ADDA5339-154

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Tried wearing surgical gloves. Double and triple layer but doesn't help much cos:

1) water gets in. Tried to tie with rubber at wrist. Helped for a while. Had to release for blood flow haha.

2) gloves doesn't work well with epoxy. The epoxy sticks to the gloves and make kneading impossible.

3) reduces the touch sensitivity when placing and gluing coral... the pressure is inportant when placing corals against rock and wait for glue to cure, finding the right position in the crook to place involves rotating and trying out different angles. Impossible.

4) rock scape is not possible. Rocks punch hole into my gloves.

or just ring me :)

Thank thanks... Really appreciate your offer but I peiseh lah.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

update on fishes..

gem tang in May 2012

DSC_0884.jpg

now as @ Feb 2013 :ooh:

d1ddfa78-1a97-4bc5-8367-ac1361c8b917_zps

480baa93-8162-4c4f-ba05-d1d0af05f32e_zps

achilles tangs

4BDFCCE4-7955-4AEA-9181-12051E5E6EAE-154

a800df74-2d0c-4050-84f7-73dc8016b3c8_zps

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Very Good Job, Law,

Cull those tt are not so nice, so more space is made available.

Then you can eagerly wait for new shipments to collect more gems.

If for some strange reasons tt you have a dislike for the scepter Echin, or tired of enjoying strawberry shortcake, do let me know.

I will be there to remove them for you, at no cost. Remember hor.

Cheers,

Mike.

Link to comment
Share on other sites

  • SRC Member

thank you uncle mike. wasnt my intention to deliberately cull the sps.. i lost some treasures during the rescape and incidentally my T5 decided to go on strike for a couple of days. so some sps didnt make it. those that did are still 50-50

luckily the ssc and scepter is ok lah.. although a little stressed. but will definitely call you one if i decide to give up these 2... in the meantime, they are still enjoying the prime top spots in my tank. haha..

taken under white light during sunrise..

3FE9F494-0AA7-4680-9A53-089A271D39E6-154

AC2883C8-A227-4524-91EC-1C0B8D4B28E1-154

8C19DB2B-AA1E-49A6-BE4B-805AF8FF77CC-154

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Nice pair of AT u have :thumbsup:

thank you bro.. they are one of my favourites too.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      购买澳洲文凭,成绩单(Q微信956290760)办理澳洲天主教大学毕业证成绩单ACU毕业证成绩单学历认证,留信认证,电子版OFFER,成绩单,澳洲大学文凭,病假条,学期成绩单,Australian Catholic University

    2. 0

      购买澳洲文凭,成绩单(Q微信956290760)办理旋宾科技大学毕业证成绩单ACU毕业证成绩单学历认证,留信认证,电子版OFFER,成绩单,澳洲大学文凭,病假条,学期成绩单,Swinburne University of Technology

    3. 0

      购买澳洲文凭,成绩单(Q微信956290760)办理澳洲巴里迪大学毕业证成绩单毕业证成绩单学历认证,留信认证,电子版OFFER,成绩单,澳洲大学文凭,病假条,学期成绩单,University of Ballarat

    4. 0

      购买澳洲文凭,成绩单(Q微信956290760)办理澳洲堪培拉大学毕业证成绩单学历认证,留信认证,电子版OFFER,成绩单,澳洲大学文凭,病假条,学期成绩单,University of Canberra

    5. 0

      购买澳洲文凭,成绩单(Q微信956290760)办理澳洲科廷大学Curtin毕业证成绩单学历认证,留信认证,电子版OFFER,成绩单,澳洲大学文凭,病假条,学期成绩单,Curtin University

×
×
  • Create New...