Jump to content

Seafan, Is this NPS or not?


Admiraltian
 Share

Recommended Posts

Just wondering if this species i bought is NPS or not, Need lighing or no need?

post-19777-0-72996500-1349883953_thumb.j

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

NPS... Cheers..

Thanks, Bro. Any idea the name or species of this seafan?

  • Like 1

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Not quite good in NPS IDing... try google gorgonians for more info?

Cheers..

Ok, sure, thanks.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

:cheers: An NPS Gorgonian known as Menella sp.

Menella sp.

Common names: Menella Gorgonian, Golden Sea Rod

Note: coral also comes in blue and brown variations Blue Sea Rod

Type of Coral: Gorgonian

Care Level: Intermediate

Reproduction: most likely sexual, can be fragged

Coral Placement/Orientation: Insensitive to light. Coral in not finicky in placement, does well in laminar flow or turbulent flow, can be glued or epoxied vertically or horizontally

Feeding: Gorgonians are suspension feeders that filter small food particles from the water column: zooplankton, eggs/larvae, possibly bacterioplankton and detritus. Food should be no larger than frozen cyclop-eeze, with the majority being much smaller such as rotifers. Polyps will retract without constant food in the water.

Additional tips or words of wisdom This large polyp species of gorgonian is one of the more easier species of non-photosynthetic gorgonians to keep. They are still difficult relative to most photosynthetic corals and should be attempted once Beginner non-photosynthetic corals have been able to be sustained in the aquarium for a period of time. You should feed small amounts as often as possible. A continuous feeding system (dry or liquid) will yield the best results as the polyps should stay open almost 24/7. If the polyps stay closed most of the time, either you don't have enough flow, enough food in the water or your water quality is too poor. This coral will grow vertically from the tips and "encrust" from the base if it is healthy. It will grow in the direction of the strongest flow and can handle literally being blasted with it. The tissue gets algae and detritus build up easily and should be kept clean (high flow will help a lot).

Note: Coral can "wax over" and shed. While this process is occurring, polyps will not expand. The process can be assisted by using a turkey baster to gently remove the "waxed over" coating. Coral will have a "new" appearance after this takes place.

References:

http://www.aquatouch...0Gorgonians.pdf

post-2609-0-61569300-1349971473_thumb.jp

post-2609-0-31670000-1349971485_thumb.jp

Link to comment
Share on other sites

:cheers: An NPS Gorgonian known as Menella sp. Menella sp. Common names: Menella Gorgonian, Golden Sea Rod Note: coral also comes in blue and brown variations Blue Sea Rod Type of Coral: Gorgonian Care Level: Intermediate Reproduction: most likely sexual, can be fragged Coral Placement/Orientation: Insensitive to light. Coral in not finicky in placement, does well in laminar flow or turbulent flow, can be glued or epoxied vertically or horizontally Feeding: Gorgonians are suspension feeders that filter small food particles from the water column: zooplankton, eggs/larvae, possibly bacterioplankton and detritus. Food should be no larger than frozen cyclop-eeze, with the majority being much smaller such as rotifers. Polyps will retract without constant food in the water. Additional tips or words of wisdom This large polyp species of gorgonian is one of the more easier species of non-photosynthetic gorgonians to keep. They are still difficult relative to most photosynthetic corals and should be attempted once Beginner non-photosynthetic corals have been able to be sustained in the aquarium for a period of time. You should feed small amounts as often as possible. A continuous feeding system (dry or liquid) will yield the best results as the polyps should stay open almost 24/7. If the polyps stay closed most of the time, either you don't have enough flow, enough food in the water or your water quality is too poor. This coral will grow vertically from the tips and "encrust" from the base if it is healthy. It will grow in the direction of the strongest flow and can handle literally being blasted with it. The tissue gets algae and detritus build up easily and should be kept clean (high flow will help a lot). Note: Coral can "wax over" and shed. While this process is occurring, polyps will not expand. The process can be assisted by using a turkey baster to gently remove the "waxed over" coating. Coral will have a "new" appearance after this takes place. References: http://www.aquatouch...0Gorgonians.pdf

Thanks for the information. :ThanxSmiley:

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Ruben's Love Spells in Cheyenne (310) 882-6330 That Work Immediately with Psychic Reading | Black Magic Removal | Get Ex-Lover Back | Love Problem Solution

    2. 0

      PsyChic LoVe Spells (310) 882-6330 in Wyoming, WY To Make Someone Love You Instantly | Accurate Psychic Reading | Black Magic Removal | Get Ex-Lover Back

    3. 0

      Ruben's Love Spells in Burlington, VT (310) 882-6330 That Work Immediately with Psychic Reading | Black Magic Removal | Get Ex-Lover Back | Love Problem Solution

    4. 0

      Astrologer LoVe Spells (310) 882-6330 in Vermont, VT To Make Someone Love You Instantly | Accurate Psychic Reading | Black Magic Removal | Get Ex-Lover Back

    5. 0

      Voodoo Love Spells in Fargo, ND (310) 882-6330 That Work Immediately with Psychic Reading | Black Magic Removal | Get Ex-Lover Back | Love Problem Solution

×
×
  • Create New...