Jump to content

My DIY Cabinet


oceanviper
 Share

Recommended Posts

  • SRC Member

Finally got the last pcs of the acrylic sheet and cut into the desire dimension with my friend workshop tools.post-16802-14375807001458_thumb.jpg

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 1 month later...
  • SRC Member

Have not really started my assembly as busy with work and also waiting for my tools.

Got a SPS from Pinnacle today shipment.

 

20150918_212810.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Now preparing the masking and line out area needed to cut or holes to drill.

The back plane of the overflow and also the return outlet.

 

20150927_235953.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

The left hole has error and has rectified.

It should be located lower as what located on the right side

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Just share the gsp I have on my current tank while slowly work on my next upcoming tank.

e24c82dd6ecb51e6d20fb26877ea1634.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

My current fts with blue led on.

df29b2f120aa9446c99df26f10acb805.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

DUNCAN from one head growth till now.

https://vimeo.com/141986787

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Hi TS, do u have a thread to share how u done up ya LED light? It looks amazing. Am excited to see the outcme of your new project too. 

Hi Bro.

I don't have the thread as the LED process was done with no pictures took.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Hi Bro.

I don't have the thread as the LED process was done with no pictures took.

Ok. Noted. I had been looking for ways to DIY a LED light like yours. Yours is neat and nice. :)

Link to comment
Share on other sites

  • SRC Member

Ok. Noted. I had been looking for ways to DIY a LED light like yours. Yours is neat and nice. :)

Hi bro.

Thanks for the comments.

Here we have lots of DIY gurus.

Mine is not the best.,...

 

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...
  • 4 months later...
  • SRC Member

Only have the time to continue with what i have left behind on this project.

 

 

IMG-20160410-WA0005.jpeg

IMG-20160410-WA0007.jpeg

IMG-20160410-WA0009.jpeg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Wow, bro what clamp is that? It will clamp 2 workpiece perpendicularly?

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Wow, bro what clamp is that? It will clamp 2 workpiece perpendicularly?

Hi bro.

That is the angle clamp.

We used it for perpendicular support.

I don't have the manpower to hold that for overnight which factory area would be possible...but not in HDB flats.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

nice handy work!

Still far from complete.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Thank You bro oceanviper. Where you get the clamp from? And is it affordable?

 

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Thank You bro oceanviper. Where you get the clamp from? And is it affordable?

 

Hi Sherman bro. I got the clamp from Masterpro HW shop.

The price is depend on the quality made.

Price range from SGD 4 to SGD20

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Thk You Bro. Still affordable.

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Trying out with the smaller pieces which need more sanding on the edge before joining the pieces.

 

20160415_233755_resized.jpg

20160415_233009_resized.jpg

20160415_232448_resized.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

After done another round of fine sanding...

Time for the display tank part.

 

 

20160416_210627_resized_1.jpg

20160416_145831_resized_1.jpg

20160416_143418_resized.jpg

20160416_141628_resized_1.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Top cover design changed and have to remove the extra to fit into the latest design specs.

Try out on the entire 4 pcs matching.

 

20160418_204151_resized.thumb.jpg.fec461

 

20160419_212226_resized.thumb.jpg.94cfa1

 

Top cover masked out the cut off area.

20160419_212219_resized.thumb.jpg.2f0121

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...