Jump to content

My DIY Cabinet


oceanviper
 Share

Recommended Posts

  • SRC Member

Hi there.

With some questioned answered from Ryanlio, now is my slow and easy time to built my own cabinet.

First two side of the cabinet structure.

post-16802-0-50589000-1354632699_thumb.j

post-16802-0-94489100-1354632700_thumb.j

My autoCAD designed tank

IMG_0461_mpeg2video.mpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

good patience. keep the faith!

The spirit of sharing...

always remember forum is like its name - forum

Singapore Reef Club – We are an online discussion community which aim to provide quality information about setting up and keeping a marine reef aquarium. By joining us as a members, you will be able to learn and share your experience in this hobby and at the same time making some friends here !! We hope by educating the public about the marine hobby, we will be able to create greater awareness of the fragility of our coral reefs as well as loving each and every living fish / corals we purchase as a responsible reefer.

Link to comment
Share on other sites

  • SRC Member

Some updates after few days slow and easy built on the cabinet.

post-16802-0-61538900-1355151900_thumb.j

post-16802-0-64141300-1355151902_thumb.j

post-16802-0-10184600-1355151905_thumb.j

post-16802-0-48163100-1355151907_thumb.j

post-16802-0-78521900-1355151909_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Bro, I think your stand supports not so ideal..

Refer here.. http://www.garf.org/stand.html

The horizontal pieces supposed to "wrap" the verticals..

From your construction, seems like the horizontals doesn't provide supports to vertical wood..

Especially the bottom, where the verticals are resting on the horizontals.

Tank can get quite heavy with water.. Take note..

  • Like 1
Link to comment
Share on other sites

  • SRC Member

Oh wait. Or is the stand standing on its sides in the last picture?? Then it's ok..

  • Like 1
Link to comment
Share on other sites

  • SRC Member

Hi bro Ryanlio.

The picture was not rotated.

Ii showing the cabinet in vertical rather than in horizontal.

The horizontal pieces is wrap around the vertical stand.

Thanks for pointing out.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Y

tis a new tank setup? wat is autoCAD ah? haha sorry

Yup...

AutoCAD is a software used for designing.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Y

Yup...

AutoCAD is a software used for designing.

ayo ah! haha,me noob still guessin it was some kind tank concept like auto waterchange.

anyway keep the pic coming...still owe :drunk: u a ric

Too many hobby......too little money!

Link to comment
Share on other sites

Mind to share where you get those wooden beam and how much

6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08)
4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09)
5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm)
2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm)

5*2.5*2(LED only)

Eheim return 1 * pump

1 HP Daikin compressor with cooling coil
2 Jebao OW40, 1 ecotech MP40,
1X6085 Tunze wm,

1 CURVE 7 Skimmer

  1 DIY 80 led control by Bluefish mini 

1 radion XR30W G2, 2 Radion XR15G3

Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium

1 Full spectrum E27 led light

1 CR control by bubble count

Start No Water Change since 1st Dec 2016

Add new 2.5x2x 1.5 ft 

 nLekOfpYts.jpg
[/quote]


 

Link to comment
Share on other sites

  • SRC Member

Mind to share where you get those wooden beam and how much

Hi bro.

The wooden beam got from Teck Heng Long located in Syed Alwi Road.

My cabinet is a 4ft while my tank is only for 3ft.

The cost was around SGD70.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

ayo ah! haha,me noob still guessin it was some kind tank concept like auto waterchange.

anyway keep the pic coming...still owe :drunk: u a ric

Haha...

No problem.

Thanks in advance....

Will contact you once my new project is done.....but wont be so soon....

Probably get GSP again from you.....

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

did you make any wood joints to connect them?

or you solely used screws n nails?

The spirit of sharing...

always remember forum is like its name - forum

Singapore Reef Club – We are an online discussion community which aim to provide quality information about setting up and keeping a marine reef aquarium. By joining us as a members, you will be able to learn and share your experience in this hobby and at the same time making some friends here !! We hope by educating the public about the marine hobby, we will be able to create greater awareness of the fragility of our coral reefs as well as loving each and every living fish / corals we purchase as a responsible reefer.

Link to comment
Share on other sites

  • SRC Member

Just updates on the base added with plywood and continue with top plywood....

post-16802-0-29801400-1355402079_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

nice and neat woodcraft u done.

good job mate!

The spirit of sharing...

always remember forum is like its name - forum

Singapore Reef Club – We are an online discussion community which aim to provide quality information about setting up and keeping a marine reef aquarium. By joining us as a members, you will be able to learn and share your experience in this hobby and at the same time making some friends here !! We hope by educating the public about the marine hobby, we will be able to create greater awareness of the fragility of our coral reefs as well as loving each and every living fish / corals we purchase as a responsible reefer.

Link to comment
Share on other sites

  • SRC Member

The wood is kapor...

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...
  • SRC Member

Agree....at such which why my project still on-going due to some changes on the tank design....furthermore my titanium drop in coil just arrived...

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Just received my 1HP titanium drop in coil today.

post-16802-0-85055500-1359643052_thumb.j

This is durso pipe

post-16802-0-91197900-1359643086_thumb.j

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...