Jump to content

My Slice of Nature (Part 3)


SubzeroLT

Recommended Posts

40 minutes ago, SubzeroLT said:

The nyos test kit is accurate & consistent. I'd trust the results.

 

I suspect my nitrate too low too. Could be the main suspect for my dino’s problem. Thanks.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Supporter
On 7/29/2019 at 6:06 PM, xahYANG said:

Can I know what light you using? And are the par of the lights in good range?


Sent from Singapore Reef Club mobile app

I'm using Aqua Illumination Hydra lights.

This is an old pic but best shows the light configuration. The Hydra26 was brought over from my old 3ft tank. I added 4 new Hydra52 when i set up this 5ft tank.

22770756_1749941061977851_7903883707415815842_o.jpg

 

This is also an old pic showing the PAR readings. It can go much higher but this is my current setting. I think its in the good range :)

P1010867_PAR (Small).jpg

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 4 weeks later...
  • SRC Supporter

Added an acrylic cover to the CoralBox Doser.

Using this doser the past months & must say its a good value for money doser. More reliable that some i've used in the past.

Do note you connect to it via home Wifi. This does not connect to a cloud for remote access (which is not needed for a dosing pump anyway).

 

 

 

1711352642_P1010664(Small).jpg.7145594133e784c3b32fd471ce6b7a60.jpg

 

Water change day.

1200195725_P1010649(Small).jpg.0a6578b41bd7329652e9e33b5809e0ee.jpg

 

Small contraption to help with the water mixing. One pipe points down to get to all the dead spots & manipulated via a long handle. 

A valve routes water upwards to circulate the water up/down. Which also connects to a long hose to fill the display tank in the living room.

841348526_P1010657a(Small).jpg.240aee74bb8ef05126397488aca86b62.jpg

 

View of the sump

90856235_P1011307(Small)(Small).jpg.7fbcc51492ad33d8aae519c26542388e.jpg

 

Time to change the zeo stones.

86653882_20190817_103626737_iOS(Small).jpg.1fc6f7f84f88da86596f451a87e32cac.jpg

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Top view during water change

1581867940_20190824_031343503_iOS(Small).jpg.aa575001c2e4a1abd1b98cd85609061f.jpg

 

1266877399_20190824_031447462_iOS(Small).jpg.4f6459eeb9d27a3d8dc33320d7316de6.jpg

 

2024399135_20190824_031457021_iOS(Small).jpg.3c5f58bb14c748008e46f91ff2a547b5.jpg

 

Other random pics 

1059213319_P8250037(Small).jpg.d467b57d7515736a96f24405ab69c2ba.jpg

 

Branching supersun

681180070_P8250036(Small).jpg.2cc48d2ccd23a8154ffa333ab0fb1dd6.jpg

 

Watermelon milli

161960016_P8250063(Small).jpg.e1ffa9c576e5749c51ace9247dcfd55a.jpg

 

Royal Blue Milli (super slow grower)

883908388_P8250072(Small).jpg.7e4cc43c7d34758b69011362ea2b2e46.jpg

 

Bali Slimer attaching & killing off another acro 

1456252419_P8250083(Small).jpg.e02b0168d1a7b5f70acbcb0d5228943d.jpg

 

Wolverine from another reefer. Acclimatizing it to LED the past month. Now moving to high light area

1797645362_P8250078(Small).jpg.6e0685da174cd0d9c46b2ee1261980a6.jpg

 

Added a tiny Atlantic Blue Tang. Its so small that the other adult tangs don't bother it at all.

It was in a refugium for a week - fed with pods, mysis & pellet food to fatten up before going into the display tank

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Some 3D print projects :

 

Drawing up the Nero Anemone guard

Fusion1.thumb.JPG.97118645d105975c7601d4b381eb37b5.JPG

 

197649625_20190825_025404105_iOS(Small).jpg.75737134d8d0f54cfd418627c2a05290.jpg

 

18094077_P8250031(Small).jpg.6352c01db7c4a0f2c5ee6142edc9007e.jpg

 

And for MP40

Takes about 7hrs to print :(

1259816627_20190824_151629061_iOS(Small).jpg.f180220a43706c700b5c27be4ad1aa7b.jpg

 

821326396_20190824_232208674_iOS(Small).jpg.355b11cdaa74b8206f67d1a61edb02c8.jpg

 

1709374425_20190824_232817557_iOS(Small).jpg.5d99d6e2596619d96f13dbd38477cba0.jpg

 

775844480_P8250024(Small).jpg.ba1506d09b3f19f73e6d51dc6c2eabcd.jpg

 

Available for sale. PM if you are keen.

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

5 hours ago, SubzeroLT said:

Some 3D print projects :

 

Drawing up the Nero Anemone guard

Fusion1.thumb.JPG.97118645d105975c7601d4b381eb37b5.JPG

 

197649625_20190825_025404105_iOS(Small).jpg.75737134d8d0f54cfd418627c2a05290.jpg

 

18094077_P8250031(Small).jpg.6352c01db7c4a0f2c5ee6142edc9007e.jpg

 

And for MP40

Takes about 7hrs to print :(

1259816627_20190824_151629061_iOS(Small).jpg.f180220a43706c700b5c27be4ad1aa7b.jpg

 

821326396_20190824_232208674_iOS(Small).jpg.355b11cdaa74b8206f67d1a61edb02c8.jpg

 

1709374425_20190824_232817557_iOS(Small).jpg.5d99d6e2596619d96f13dbd38477cba0.jpg

 

775844480_P8250024(Small).jpg.ba1506d09b3f19f73e6d51dc6c2eabcd.jpg

 

Available for sale. PM if you are keen.

 

Nice concept.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member
On 7/1/2019 at 1:21 PM, SubzeroLT said:

Using the new batch Clarisea fleece for the past 2 weeks. New material, longer ....and same price :)

Fleece appears darker & seems to be picking up more stuff. My old batch fleece currently lasts about 1.5 - 2 months. Looking forward to the new fleece lasting even longer.

20190623_011104575_iOS (Small).jpg

 

 

 

Hello ! Would like to check with you how did you manage to fit the hose down to your Clarisea? 

I saw you used a reducer to fit a 1 inch soft silicon hose. but what about the 2nd down pipe? (i think i saw you have 2 down pipe ) 

Link to comment
Share on other sites

  • SRC Supporter
45 minutes ago, daveyy said:

Hello ! Would like to check with you how did you manage to fit the hose down to your Clarisea? 

I saw you used a reducer to fit a 1 inch soft silicon hose. but what about the 2nd down pipe? (i think i saw you have 2 down pipe ) 

There are 2 down pipes from the tank (Herbie set up). One is the main drain & the other is the emergency drain.

For the main drain (40mm) pipe, it needs to be reduced to 30mm via a reducer from a piping shop. In my case, i 3D printed mine (to have additional feature).

227999530_P1010507(Small).jpg.ddcc7620cdc941ab716a5993c927c6e4.jpg

From here, the flexible hose is fitted into it & held in place with 2 cable ties.

Also, it is NOT a soft silicon hose. But more of those flexible vacuum cleaner hose type.

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member
2 minutes ago, SubzeroLT said:

There are 2 down pipes from the tank (Herbie set up). One is the main drain & the other is the emergency drain.

For the main drain (40mm) pipe, it needs to be reduced to 30mm via a reducer from a piping shop. In my case, i 3D printed mine (to have additional feature).

227999530_P1010507(Small).jpg.ddcc7620cdc941ab716a5993c927c6e4.jpg

From here, the flexible hose is fitted into it & held in place with 2 cable ties.

Also, it is NOT a soft silicon hose. But more of those flexible vacuum cleaner hose type.

My bad on the soft silicon hose, must have confused with the one you attach to your vectra.

My current tank have 2 down flow and too much of a pain to re-do the piping. In my next build probably gonna opt for a single down flow to accommodate for the clarisea. 

Appreciate your fast respond. Cheers!

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Supporter

Built a small acrylic tank that will sit on a platform above the bio media in the sump. 5mm panels. Mostly in white to improve internal reflection. 2 clear viewing panels as it will double up as a refugium for fish as necessary. One panel is made lower so water overflows back into the sump.

The main purpose was to improve the water pH levels and probably some contribution to reduce nitrate/phosphate. 

1213620821_20190918_121317559_iOS(Small).jpg.f3733127eae3dfface33d7a8112e3e0a.jpg

 

Day 1 :

1253627027_20190919_225429251_iOS(Small).jpg.bd58679bfc6130913d16ae729587e432.jpg

 

Day 4 :

651963195_P1010261b(Small).jpg.9656811d91f7b996bbe6967aff34a2c7.jpg

 

Using the Prime Fuge to light it up. It has the right color spectrum (UV, red & white), comes with a cooling fan and a controllable via the MyAI app.

1214360437_20190915_094338589_iOS(Small).jpg.0096fc18b7d69fcb8c97f0c2e4b53e69.jpg

1033942310_20190922_011542000_iOS(Small).thumb.png.484581a4b6b5b1048c4f837ff5b38809.png

 

3D printed a small mounting bracket

1407099670_P1010246(Small).jpg.96f12b13fce0353be64a6861f8a77d24.jpg

 

1549102401_P1010267(Small).jpg.788ef318011674e4fd8dac39eb6d6f80.jpg

 

Water flowing into it is 50% from the calcium reactor (laden with CO2) & 50% unfiltered water from the down pipe (hopefully with some pods in in)

3D printed a small nozzle to output water side ways to visually monitor the calcium reactor effluent flow rate.

1711155944_P1010264(Small).jpg.a38c5c0b71ed91285caa26a5634c4145.jpg

 

Hood to block stray light

141670584_20190921_005726450_iOS(Small).jpg.23b29bdbee7babbce382ddba5cc4766a.jpg

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...
  • SRC Supporter

Added black acrylic outside to minimize stray light reaching the skimmer & reactors

1676668795_P1010286a(Small).jpg.0ae3888677df77cec696c380bceb3d05.jpg

 

1402792111_P1010284a(Small).jpg.3e822efe1de6aae197fed946669feb5a.jpg

 

Growth is crazy

1863613144_P1010280a(Small).jpg.1a7f73ed443931bd9d688c3f2e9a59fb.jpg

 

Being mindful to harvest as often as possible (every couple of days)

20191004_095307695_iOS.thumb.jpg.de3d833d118b6c38335628eb3d1eb3cf.jpg

 

Random tops down shot with the iphone

1582233849_20191006_033547141_iOS(Small).jpg.b0e421d7e79de620f301e4f026ff72d7.jpg

 

Getting a little big and shadowing the LPS on the sand bed. Had to cut this up.

475455173_20191006_043309325_iOS(Small).jpg.4568038fbafd95e325c9e5438638b586.jpg

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...
  • SRC Supporter

Printed a ring to fit over the 80mm printed frag disc

1561440394_IMG_0325(Small).JPG.df84415a78679e3f1fd1d885a16acf26.JPG

 

Current 80mm frag disc running out of space,

461305429_20191027_105921435_iOS(Small).jpg.6aadf278548336093500593c53503b1e.jpg

 

1092216388_20191027_110114907_iOS(Small).jpg.a02446772bb6593297b15ea5d172e7bf.jpg

 

Now it has more real estate to grow

313629724_20191028_071626871_iOS(Small).jpg.7bff3a949fe627266484f6e54d81b68b.jpg

 

This is the same chalice from Nov 2017

371392424_PB180011a(Small).jpg.c88713549ebbb477d8394e7085598da6.jpg

 

Got a pink gonio from Oceania Reefz. 

338721334_20191028_071636244_iOS(Small).jpg.6621427d9fe4dcf9d996a397ed307aba.jpg

 

289014993_PA280069(Small).jpg.1f29ce96d234d77635ff2876e1548fa7.jpg

 

Other random shots

 1880668848_PA280162(Small)(1).jpg.4f0409a7d3ae620f9c805a63056b8f89.jpg

 

Favia

1595434939_PA280035a(Small).jpg.094f91b2f7009ddb8cf80ed4c8639d1d.jpg

 

Lobo...need to move to lower light area. Looks  a little bleached.

656880821_PA280108(Small).jpg.3ab60633360c0df4e6cfc7c2f694955d.jpg

 

Ironman Blasto

PA280049a.thumb.jpg.3340549e64a9aeccbd58f2d0ed50ece7.jpg

 

 

 

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Color of the chalice is amazing.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Supporter
13 hours ago, Admiraltian said:

Color of the chalice is amazing.

Thanks. Quite fortunate to have nice reefing buddies around for a frag of it

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 3 months later...
  • SRC Supporter

Its been quite a few months since my last update on SRC forum. Made some changes to the tank.

Late November 2019 Upgraded the Hydra52 to Hydra64 and used it about 2 months+ now. Coral colors are great. There are a few design changes made to the Hydra64 over its predecessor.

77291365_2219862568319029_7314821624304238592_o.jpg.036f59174722d01c7c3055ea8c803ff8.jpg

 

The cables are longer and has better water proofing (peace of mind against accidental splashes). 

78606866_2219862558319030_4862367582864277504_o.thumb.jpg.7549d5c3d651f8c7e4b16fdbb5cd9c2a.jpg

 

Hydra64 clusters are slightly recessed. This makes it less glaring when viewed from the side.

78553484_2219862541652365_7847398092994248704_o.thumb.jpg.aa916b5e8be7c5af41c67b95d2c5a14e.jpg

 

Less glare from the LED when viewed from the sides (because of the recessed LEDs)

The tilted lights are the Hydra26 (not changed) compared to the Hydra64.

76676824_2219881224983830_5717412352211550208_o.thumb.jpg.b7a31fe4eb3ec4a72ee40d96b03ff5f9.jpg

 

76705148_2219862764985676_4373663401944023040_o.thumb.jpg.ed3ee9b069bb165451cf0726836b98f8.jpg

 

Hydra52 on the left. A real workhorse for the past 3 years+

78219131_2219862621652357_1338147118912634880_o.thumb.jpg.d9acf5745534e95be0d171cd0c57d6af.jpg

 

Plenty of light with capacity to go further. Definitely better spread compared to the previous Hydra52.

542459956_P1010318(Large).thumb.jpg.e7142ed128651838af4567fedada1c92.jpg

 

 

78346762_2228621660776453_2961870616245829632_n.jpg.2141122269484c0a63d8a11375b54ea3.jpg

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Got a sturdy frag rack just before Christmas from Hardcoreefer.

Nicely packaged and has a slim/sleek design. Comes in several colors to match your preference.

540613667_20191217_024647322_iOS(Large).thumb.jpg.ec1c053873d3ac1655a73f4608266fdc.jpg

196600852_20191217_024702038_iOS(Large).thumb.jpg.0bca65e07bb2223dd22fb210fc3530d3.jpg

 

More importantly is functionality. It has a rubber pad on the inside which helps prevent slipping.

1697273382_20191217_024728144_iOS(Large).thumb.jpg.3753944a414d3ab5e390ae11a4975e9c.jpg

 

Its able to take relatively large frags on my 15mm tank glass. Magnet is pretty strong - and held up against several accidental knocks the past week.

The double acrylic thickness also helps frag plugs stay upright & not tilt & touch other frags.

1473923341_20191217_030914074_iOS(Large).thumb.jpg.4b7c76c75b09a7bc63859a92ecfc6343.jpg

 

Not the cheapest price but it does enhance the aesthetics of the tank. Overall a high quality frag rack made in Singapore.

Details here : https://www.hardcoreefer.com/shop

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Some coral pics :

Getting too long & touching other corals. Snip Snip.

1021904386_20191216_101534003_iOS(Large).thumb.jpg.2503122de98d41895d1e9bb2d4493ec9.jpg

 

1 week later, the flesh is growing back & covering the cut cross section already.

74430801_PC280218(Large).thumb.jpg.53cfb91ae6ccef8949dffa2ecdf5f25b.jpg

 

Starting to shadow other corals around it. Snip snip. Need a lot of glue to stick the colony back too :(

1792229828_20191228_064602304_iOS(Large).thumb.jpg.ca5a4e809228b72ff60128fd1c6c9722.jpg

 

Yay...the croc island scolly is growing a 3rd baby head.

2015464868_PC280239(Large).thumb.jpg.5079ceb2f98910e7a981af2c80f02b64.jpg

 

They AI Hydra64 moonlight feature (its actually dim warm white light) is quite nice. Able to view the corals at night & watch the polyps out in full force.

20191125_151724435_iOS.thumb.jpg.5ebb4ff132a1d229e7d64dda73ca7cb6.jpg

 

20191125_151812136_iOS.thumb.jpg.df53c538c5a62c2929138da004e08983.jpg

 

20191125_151733323_iOS.thumb.jpg.ce40cfe3ed56abf25a1ae0e32e55ddbe.jpg

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

For those using the Alkatronic, you may have read there is a batch of reagent that required a different mixing ratio (2:3 instead of the usual 1:4 ratio of reagent to RODI water).

The 4L concentrate can make 10L instead of the usual 20L.

I got a bottle of this batch of reagent because it was going at a discounted price of $40 per bottle (from reefmarketSG) . Its actually quite a good deal. 

 

Running it the past week & all is good :)

20200205_153849168_iOS (Large).jpg

20200205_153841930_iOS (Large).jpg

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Supporter

Swapped in the Hydra32 to the front tilted lights.

203860053_20200219_103347132_iOS(Large).thumb.jpg.c6bd25187e8ecda79e924015bc24d03c.jpg

 

Current PAR numbers. Quite impressed with the spread of the new lights. The front sand bed jumped in PAR quite a bit probably because of the wider spread with the new lenses.

648266740_20200220_075700459_iOSa(Large).thumb.jpg.859ad2e460be613d40904a153540d665.jpg

 

2053128860_20200220_082933249_iOaS(Large).thumb.jpg.e9f61d620fa3918d2e9d5ff21e82ef87.jpg

 

 

 

 

 

  • Like 2

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      ¡Cuevana! ver Garfield: La película (2024)—Gratis en Español y Latino utm

    2. 0

      [!PELISPLUS¡] Ver Cinderella's Curse (2024) Online en Español y Latin hlx

    3. 0

      [.WATCH.] Daaaaaalí! (2024) (FullMovie) Free Online on English dtx

    4. 0

      Maymunlar Cehennemi: Yeni Krallık (2024) Filmini Ücretsiz İzlemek İçin En İyi Çevrimiçi Akış Seçenekleriyle İzle wbk

    5. 0

      [!PelisPlus] Hit Man (2024) Película Completa - ESPAÑOL LATINO lam

×
×
  • Create New...