SRC Member pcw Posted May 31, 2020 SRC Member Share Posted May 31, 2020 I added a UV filter to my tank but had to allow that water to recirculate back into my sump because I didn't have a secure way to send that output directly into the DT. Recently, bought an attachment that has some rails for cheap online: However, the barb attachment was too small so I had to make some modifications. The above can easily be dismantled and the plastic is soft enough to permit sanding. After sanding (the hole): Could fit a 20mm diameter pipe after. You'll have to know how wide you want to stretch the attachment before cutting the pipes but this is what I ended up with: Quick and cheap DIY to send water straight up to your DT after passing through a reactor. Quote Link to comment Share on other sites More sharing options...
SRC Member simwj Posted July 16, 2020 SRC Member Share Posted July 16, 2020 Thanks for the informative post! I'm planning to do the same after setting up the next tank. Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.