Jump to content

New 4x2x1.8 Mixed Reef Setup


oceanviper
 Share

Recommended Posts

  • SRC Member

Hi reefers...

While slowing getting my new home key collection, also planning to setup a new tank at new place.

The tank will be 4x2x1.8 ( not so deep ) for mixed reef.

The cabinet will be using aluminum profile extrusion with acrylic for the cabinet wall ( easy maintenance, water resistant, variety of colors )

stand.jpg.73dded5d28b08d48cf54b50c53204094.jpgstand.jpg.73dded5d28b08d48cf54b50c53204094.jpg

The display tank will be using 12mm~15mm glass with bracing on top and bottom. The top bracing is to prevent water splashing out although rimless is nice to have.

The overflow will be on the side with bean animal setup.

1654348307_Frontview.jpg.2265a04898972720b7fdfe79fba0541d.jpg

1665606315_TopView.jpg.cc428473a9b2337690cb281e3dcc4b32.jpg

529929985_AngleView.jpg.e9aa6dbed3ab87625a02645a6f74dc81.jpg

170908387_AngleView_2.jpg.9c906f13b9f20a97936a0ea0584997e7.jpg

For rock, will start with dead rocks that vinegar clean, RODI rinse and dipped for 3 months ++ before take out and sunbath as seen on the picture below....

WIll place back for bacteria cure while waiting for the new tank ready....and cycle together....

IMG_7126.jpg.90324008de7174fbe56353b7d5540533.jpg

For equipment :

1. Drop-in coil with existing 1HP LG compressor.

2. Bubble Magus C7/C9 Protein Skimmer

3. Skimz Calcium Reactor

4. DIY LED light ( with Maspect hanging kit and 2020 aluminium extrusion as frame )

5. Skimz SS18.0 x 3

6. Skimz Return Pump ( DC9.0 ) or higher ( current using Jebao DC9000 )

7. Media ( Marine Pure Sphere ).

8. China RODI ( 5-stages with local filter/media )

9. Inline TDS checker ( add-on ) to China RODI for monitoring TDS

10. Auto top-up using float switch to control connected to RODI output

11. Skimz Pur Reef Salt

Any comments, please feel free to post....

 

 

 

 

 

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
22 hours ago, Alco said:

Where are you customising this? Would love to do an aluminium profile cabinet.

Sent from Singapore Reef Club mobile app
 

Hi bro...

There are few sources available...

From SG :

Aluminium profile : Prestech ( Ubi area ), Alutech ( Bedok area ), can customized to your design.

Acrylic sheet : Dama Trading ( Ubi area ), Ying Kwang ( Boon Lay area ), Kings Material ( Kaki Bukit Area )

From Non-SG :

Order from taobao, etc...

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Change the display tank design a bit.

image.png.8e693d4c3c8b9a66c80caf44f3f146d5.png

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

A snapshot of the aluminium extrusion on the font and back assemble to ensure the door size is able to fit into the frame.

IMG_7236.jpg.49261296779a81a0a00125d7eed046bd.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 6 months later...
  • SRC Member

Updates on the progress with busy schedule after NSW deliver from Iwarna.

rewe.jpg

htht.jpg

ew.jpg

ewe.jpg

ewege.jpg

s.jpg

we.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
Looks real nice. May I know where you got those coloured pvc pipes?

Sent from my SM-F916B using Tapatalk



I got it from Taobao


Sent from my iPhone using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
You can consider terminating the emergency drain higher above the sump water level. 
In the event of emergency activation, you will have an audible cue. 

Thanks for the suggestion.
As the overflow area is transparent, if the water level reaches the emergency pipe level or higher than the usual, is indicated some minor clogging at the normal pipe and would need to do some maintenance before it flow down from the emergency pipe.


Sent from my iPhone using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
Awesome looking tank. Love the orange pipe.

Thanks bro


Sent from my iPhone using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
1 hour ago, oceanviper said:

transparent

It's true but when coraline algae grows on it,  maybe harder to see. 

Bean animal drain is dead silent. So an audible warning is very obvious. And this can be done with minimum effort and little drawbacks. 

Link to comment
Share on other sites

  • SRC Member
It's true but when coraline algae grows on it,  maybe harder to see. 
Bean animal drain is dead silent. So an audible warning is very obvious. And this can be done with minimum effort and little drawbacks. 

Agree.


Sent from my iPhone using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 5 months later...
  • SRC Member

Some simple photos


Sent from my iPhone using Tapatalk

IMG_0006.jpgIMG_0005.jpgIMG_0004.jpgIMG_9999.jpgIMG_0001.jpgIMG_0002.jpgIMG_0003.jpgIMG_9998.jpgIMG_9997.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...