Jump to content

Shun's humble 4.5x2.5x2


yongshun
 Share

Recommended Posts

After months of hibernation, planning and preparation, my new tank is going to arrive in a few wks time.

Dimensions: 4.5 x 2.5 x 2 (10mm)

Eqpts:

Return pumps: eheiem 1264 and rio 20

Skimmer: Deltec 701, with AB2000 as feeder

Chiller: Daikin compressor with drop-in titanium coil and controller

Lighting: Giesemann INFINITI HQ / T-5 1200 mm (with 2x250W BLV 10k, 2x ATI blue plus, 1x ATI actinic and 1x KZ Fiji purple)

Wavemaker: Tunze 6105 with controller (considering) and tunze 6045

FR: Deltec 509, with either eheim compact 600 or 1000


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

The tank is gonna act as a partition wall to this area...so watch the change in this space in a few wks time :)

post-15010-052212200 1288457705_thumb.jp


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Nice finally back after so long...

ya...been too bz recently wif tons of tings for the last few mths...missed visiting farms and cheong shipments...

Wow. Good tank depth! Looking forward to ur setup bro!

haha no lar bro...the depth is only 26", its the width...the reason for the 2.5 ft width is bcos im gonna make this a 3-way scaping, instead of my current 1 way, so i tot of sumting wider for me to play ard wif, ht is only 26" so tat i wun break my back when doing scaping or rescaping! :D

new house!!

so you manage to sell of your old tank?

how about LS?

haha yup yup! oreadi received deposit for the tank n some of the eqpts liao...LS wise im gonna kip most of the tings, except for a few fishes

Is the back of the wall the common toilet?

You can load a sump there manz...

the back wall is my MBR toilet and common toilet...my wife will kill me if i did tat lol


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Can't wait for more updates, bro! :thumbsup:

haha nth much to update at the moment bro...did some electrical works specially for the tank, will be uploading the pics over this wkend :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

wah long time no hear from u, now married with new house and new tank!!! Congrats bro... :) Where is your new place?

haha thks bro, it has been a super hectic bt rewarding yr for me...tiring, bt happy :)

will be joining the list of sengkang reefers hehe


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Tank haven up ah?

Can't wait to c... Hee...

Must be damn nice!

nt yet bro...2 more wks b4 it arrives...its nth nice compared to so many bros n sis who haf such stunning tanks...makes me drool n inspired :)


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

  • SRC Member

nt yet bro...2 more wks b4 it arrives...its nth nice compared to so many bros n sis who haf such stunning tanks...makes me drool n inspired :)

Haha... Y like that say? Things haven come,set up haven up u no confident in yourself liao?

Slowly la bro... Need time to do n arrange... Slow n steady win the race!

Some1 doesn't 1 2 do anything find an excuse,some1 1 2 do something find a mean!

Link to comment
Share on other sites

Wow...new home, new tank ! So much you can do with a fresh start :thumbsup:

Will be following your thread closely :superman:

thks bro, ya...a lot of new tings tat i can try, 3rd tank liao in 2 yrs+...hopefully will turn out well...will nid lots of tips and advices from other snr reefers and 'shifus' like u :D

Haha... Y like that say? Things haven come,set up haven up u no confident in yourself liao?

Slowly la bro... Need time to do n arrange... Slow n steady win the race!

thks for the encouraging words bro


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Installed a special DB point in my bomb shelter for my tank's eqpts and for the aircon chiller, with concealed wires around the house except for inside the bomb shelter. This is to prevent/minimize tripping the whole hse if there's a short circuit for any of the eqpts and vice versa. Hopefully this helps.

post-15010-021958200 1289221026_thumb.jp


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

pic of my skimmer...its a discontinued model, my 1st experience with needlewheel after switching from beckett...its gonna be the heartbeat of my system

some info on the stocking level:

- Normal Stocking 1500l

- Heavy Stocking 1000l

its very impt for me to get a overpowered skimmer to skim out tons of organic waste as i luv to haf lots of fishes (30+ fishes from my last 3 ft)

bad example on the stocking level...dun learn frm me lol

post-15010-014740500 1289221812_thumb.jp

  • Like 1


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

at last! the tank has arrived...stil pending for the sump though, hands realli getting more n more itchy oreadi

post-15010-025087900 1289837116_thumb.jp


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

pic of vincent preparing his 'gun'

post-15010-018036600 1289837185_thumb.jp


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

wonder wat is he searching for inside the overflow box...

post-15010-073178800 1289837249_thumb.jp


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

the main wiring inside my cabinet

post-15010-001902200 1289837349_thumb.jp


Main tank: 4.5 x 2.5 x 2
Skimmer: Deltec AP701
Return pump: RD 6

Chiller: Daikin compressor with Titanium coil
Wavemaker: Jebao w-20, Maxspect Gyre xf150

Lighting: 8x54 ATI Sunpower Non-dimmable

Linked tank
Main tank: 2 x 1 x 2
Return: Eheim 1260
Lighting: AI Hydra 26 with controller
Wavemaker: Tunze 6025
My decommed 3 ft setup

Link to comment
Share on other sites

Don envy pol, when is yrs coming up or already up? Lol

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Ruben's Love Spells in Cheyenne (310) 882-6330 That Work Immediately with Psychic Reading | Black Magic Removal | Get Ex-Lover Back | Love Problem Solution

    2. 0

      PsyChic LoVe Spells (310) 882-6330 in Wyoming, WY To Make Someone Love You Instantly | Accurate Psychic Reading | Black Magic Removal | Get Ex-Lover Back

    3. 0

      Ruben's Love Spells in Burlington, VT (310) 882-6330 That Work Immediately with Psychic Reading | Black Magic Removal | Get Ex-Lover Back | Love Problem Solution

    4. 0

      Astrologer LoVe Spells (310) 882-6330 in Vermont, VT To Make Someone Love You Instantly | Accurate Psychic Reading | Black Magic Removal | Get Ex-Lover Back

    5. 0

      Voodoo Love Spells in Fargo, ND (310) 882-6330 That Work Immediately with Psychic Reading | Black Magic Removal | Get Ex-Lover Back | Love Problem Solution

×
×
  • Create New...