Bright

Anybody letting go Powder Blue?

Anybody have a stable and healthy powder blue tang letting go? I'm keen if you are. Thanks.

I have a RW8 which I only use for 2 weeks for sale at $45, as picture shows. I have another RW8(spoilt) to give (FOC) to the person who gets the above too(if he wants), the 3pin plug is useable to replace the new set's adaptor plug.

Thanks bro

Anyone has a medium size yellow tang to let go?

I contained all the lights in my DIY black room, so that no excess lights in my sump, as such no free-growing algaes elsewhere.

Hi Guys, sorry for all the late updates. I had tried out my DIY scrubber, and under the guidance of Bro Xiggie, it works well for me! No more need to entertain those red slimy cyanos and blah blah algaes anymore. No more trapped bubbles on the rocks problems anymore! Today I saw that the scrubber's algae tipping out from my DIY hatch and I decided to "harvest" it! Throw the first generation algaes all away, so there is space for new generations to grow. Here're the pictures:

I normally do WC once a week but just that minor bit(one standard red pail). It's for replenishing the trace elements like what Bro Xiggie has mentioned. I haven't try not changing yet, but I'm only having LPS and fishes. But doing water change is a easy task for me, 20mins from start to stop, because now no need to rid algae from Display tank saves me so much time! As for options 1, 2, and 3. I will go for number 2, since I had tried the upflow(no.3) now, with the light source from the outer of glass. I realized that, what Bro Xiggie said was right, more air generate more algae inducement. But for an up flow, the surface area is too small so it restricted the algae growth. The larger the surface area, the more algae growth possibility, but that also means you must have ample light on them. That is why Bro Xiggie had two side by side.

Lucky it wasn't the Great White. Anyone knows if all the four Pasir Ris fish farms are opened this Jubilee long weekend?

Hi Bro Xiggie I had been using for past 1 month, and the Algae is growing! Long long algaes, just like those in your pictures. However, I then realized what you said was right! An upflow Algae Scrubber is indeed not as efficient as the floating scrubber. I felt that the growth has been restricted somehow. But I do have to give the DIY scrubber the credit, as it has significantly reduced all those red slimes and green algaes in my display tank, and all the trapped-air-bubbles problems are gone too! *Phew* What a relieved! I will be modifying the upflow scrubber into a so-called floating scrubber once the 5-7 x3W driver reaches me! But most importantly, I have to thank you very much for your guidance and advises that I no longer need to stretch my hands into the display tank every evening to clear all those unsightly red slime and trapped air bubbles! Thumbs up, Bro Xiggie! And thanking SRC too for the platform for us to learn from the seniors continuously!

Any diamond watchman gobies seen? Or any gobies that can clear my sandbed

Hi Bro nywk153, do you know how much Ah Beng selling for Midas Blenny and Red Scooter Blenny? Can PM me the price if you know? Thanks.

Got my Flame Angel finally from Pacific Reef, thanks to Bro CookieCrunch for the update. If anyone see a purple tang at LFS, or letting go a purple tang about 2.5inch, please let me know. Thanks.

Hi Bro CookieCrunch, do you know how much CF selling the Flame Angels? Can PM me if you know? Thanks.

Anyone saw Flame Angel and Purple tang at Pasir Ris or LCK?

Anyone saw them in fish farm at Pasir Ris or LCK?

Anyone selling Purple tang and Flame Angel? I'm keen. Size approxi. 2 - 2.5 inch if there is. Would have went to LCK201 yesterday for the flame angel, but simply no time and transport. PM me if you do. Thanks.

Uncle Jon, can check with you, Are there a lot of flame angels to choose from too? Any small size golden maroon clownfish? Thanks

Anyone saw Flame angels at the Pasir Ris farms, today? I saw posting that that LCK trio fisheries selling them, but it's too far in. Anyone can advise?

Hi Bro Xiggie, the 660nm Red Leds finally arrived at my home yesterday! Exciting moments! I had connected it up and it switched on properly just now. I had also screwed the PCB onto a thick aluminum sheet, so as to let it act as a heatsink to dissipate some heat. I do have a question though, can you enlighten me? After turning it on for about 30mins, I realized that the driver makes a hissing noise! Does yours has similar noise created by the driver? I was afraid that it might be some kind of electricity leaking so I decided to switch it off, and seek advise first. Can you show me some light? Thanks.

Thanks Bro Xiggie for all advises and experiences shared. Wahset! The delivery sure is snail mailing man... takes so long leh...*Muahaha* But I really cannot complain lor, because it is a cheap yet effective bargain. Will go shop for the cross stitch plastic sheet this weekend at Artfriend.

Wah! Bro Xiggie, I'm very impressed by your gesture leh... You literally teared down your equipment to share your experiences with us. Thumbs up for you man! You are the man! After my queries posted and you shared with me your DIY Algae scrubber, I had placed order to the Hongkong distributor to acquire the 660nm LEDs on 18-May-2015. I have been so eager to check my postage each day, although it has yet to arrived(since the promised ETA was 2-Jun then). And do you know, that I have been trying to search high and low for the best & closes algae growth screen as yours from since then, but nothing comes close to the one I saw you posted. I also paiseh to ask you leh, because such simple item ought to be able to find at "5 metal shop", but to be frank, nothing comes close to yours, Daiso, Japan home, and etc, all cannot find... So, so... you shedded light to me again, heehee, Artfriend! After my completion, will share with Master my completed DIY project. Hope mine work too! Thanks again.

Bro FinBir, that means you are DIYing something like the UAS, right? Actually, me too leh, I was trying to simulate Santa Monica's Upflow scrubber due to my limited space constraint. But after I heard that Bro Xiggie already did all all of the above, and found his final Floating DIY scrubber most effective was making me doubtful whether if I should still go ahead with my planned UAS. *haha* But in anyway, I believe no matter what it is, we can always do modification here and there.

Bro Xiggie, the local shop at AMK said they don't sell plants/Algae growth LEDs. I have thus placed order with the Hongkong seller you recommended, minutes ago. Really hope to receive the set soon and get the DIY Algae scrubber up in my sump the soonest! I will do an update to you guys here too when I'm hands on. Thumbs up for your sharing.