Jump to content

Where to repair resun chillers?


Recommended Posts

  • SRC Member

Maybe u can try to contact Andy and check with him.HP:91465383

-Main Display Tank : 2ft x 1.5ft x 1.5ft c/w sump tank cabinet (Set up by aquarium artist)

-Lightings : 4 sets of 1.5ft mini aqua lumen LED lights (7 high power led 15W)

-Chiller: 1/4HP artica chiller with a standby of HC-100A

-Skimmer : Bubble Magnus 3 (cone)

-Phosphate Reactor

-NP Bio-pellet D&D onceanic hang-on reactor

-Wavemaker : MP10

-Temperature mointor : American Wireless pinpoint thermometer

Link to comment
Share on other sites

Depending on what's not working, I also have a Resun which I took the trouble to tear it apart only to find out it was the fuse that blew. If you have some electrical know-how, with the help of a multimeter, it could help.

FOWLR Tank : 48"x24"x30"

Sump: 36"x18"x20"

Return Pump : Rio 32HF

Skimmer: Reef Octopus DNW-110

Lighting: 150W MH

Link to comment
Share on other sites

Hi all! thanks for ur help. yea i checked the fuse already. it wasnt blown. called resun agent and they quoted me $120 to repair it. wasn't willing to pay that amount as it was already almost the amount i bought the chiller for. So took out the circuit board cleaned with contact cleaner and resoldered the corroded parts and its working as good as new now.

Link to comment
Share on other sites

Yes, fixing your own problem is great.

Oh yes, the Resun tend to allow water seepage thru the control panel area, I have a few short circuits before when I accidently dripped water on it. It's good to use clear tape to seal off the gaps to prevent any seepage, this might be the cause of your corrosion.

FOWLR Tank : 48"x24"x30"

Sump: 36"x18"x20"

Return Pump : Rio 32HF

Skimmer: Reef Octopus DNW-110

Lighting: 150W MH

Link to comment
Share on other sites

  • 2 weeks later...

To each it's own. Some said that hailea is quieter, haven't personally tried it.

Internally looks pretty much similar, but for the exhaust fan build, I personally liked the hailea ones which can easily be replaced without needing new mounts.

FOWLR Tank : 48"x24"x30"

Sump: 36"x18"x20"

Return Pump : Rio 32HF

Skimmer: Reef Octopus DNW-110

Lighting: 150W MH

Link to comment
Share on other sites

  • 3 months later...

Hi,

Do anyone know what is the cost of replacing the fan of the daeli 1/4hp chiller?

or any good contact to call?

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • 8 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...