Jump to content

My Reef journey start again


tanit
 Share

Recommended Posts

  • SRC Member

Nice diy work on the led lightings. How far away from the water surface?

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Nice diy work on the led lightings. How far away from the water surface?

It's around 12" from water surface. As I use 60 degree lens. When turn at 90% it very bright.

Anyone have par meter for me to borrow to measure will be the best measure.

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Maybe you can post this question to RA ... Maybe they can help you on these. If not check out RC diy forum there are many diy led thread and I came across some have the same scenario as you and they manage to solve it

Thank will try to search. As I understand that this meanwell driver by official spec it can dim to only 10-15%. After some search seem not many in market can dim to 1%. One of them is call Steve's driver. It's cheaper than meanwel but sure about reliability. I will try to research more.

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Nice tank and great DIY of the lights!

Thanks

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Thank will try to search. As I understand that this meanwell driver by official spec it can dim to only 10-15%. After some search seem not many in market can dim to 1%. One of them is call Steve's driver. It's cheaper than meanwel but sure about reliability. I will try to research more.

Try searching for mw LDD drivers ;)

Sent from my GT-I9100 using Tapatalk 2

Link to comment
Share on other sites

Try searching for mw LDD drivers ;)

Sent from my GT-I9100 using Tapatalk 2

You mean meanwell LDD series? But this will require DC voltage for input. I try to search for another,it's also using DC input.

Hmm..... Llook like if really need to control to single digit dimmable percentage need to go for DC controller.

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

You mean meanwell LDD series? But this will require DC voltage for input. I try to search for another,it's also using DC input.

Hmm..... Llook like if really need to control to single digit dimmable percentage need to go for DC controller.

u can even use an old laptop power supply if ur light is of small scale. just do some voltage calculation according to ur no. of led used

Sent from my GT-I9100 using Tapatalk 2

Link to comment
Share on other sites

For laptop adapter at most I found is 24v which can drive 6-7 led per driver. For my case I will need 8-9 driver that would almost double of my driver that I use now. And made cost must higher. Else need to jump to proper dc converter higher voltage insate like 48v for 12 led per string.

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Some of my coral LPS

post-13931-0-63411000-1352032087_thumb.j

post-13931-0-80776900-1352032088_thumb.j

post-13931-0-87083200-1352032089_thumb.j

post-13931-0-73797200-1352032090_thumb.j

post-13931-0-70770100-1352032091_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Some Zoa

My Clementine

post-13931-0-49111000-1352032240_thumb.j

Superman

post-13931-0-34354700-1352032241_thumb.j

Magician

post-13931-0-44272200-1352032242_thumb.j

Eagle eye

post-13931-0-27921900-1352032243_thumb.j

Super Nova

post-13931-0-13964800-1352032244_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

My favorite fish

Algae blenny. He is common fish but got charactor

post-13931-0-43693600-1352032460_thumb.j

Royal Gramma

post-13931-0-18784800-1352032461_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Some tank shot

post-13931-0-74926800-1352032701_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

post-13931-0-56420800-1352032988_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Nice photos of your livestock.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Beautiful Natural scape and great photography skills.

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

Nice photos of your livestock.

Beautiful Natural scape and great photography skills.

Nice and healthy lps you have...

Thanks you for all comment

Nice rockscape, did it yourself bro?

Yes. did myself. just start with nice shape of some big live rock. It help a lot

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Nice tank bro, I will be camping here .

Thanks Bro

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

I do not have think to update much at this moment. I try to control my self to stock it very slow.

Now just try to play around with my Camera and macro lens.

So This is outcome. Please give some advice

Start with fish. They are common fish with different feel under close up shot.

post-13931-0-82093600-1352641727_thumb.j

post-13931-0-79785100-1352641778_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

post-13931-0-91212100-1352641850_thumb.j

post-13931-0-43553100-1352641872_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

Landscape for side view

post-13931-0-16324800-1352641974_thumb.j

Tank Spec :

Display tank : 48" x 24" x 18."'(H)

Sump tank : 25" x 23" x 18"(H)

Return pump : Reef Octopus 8000

Wave Maker : Vortech MP10Wes

Lighting : DIY LED (Cree led) 60 bulb

Chiller : helia 55hs

Skimmer : BM Curve 7

Controller : Reef Angel

Link to comment
Share on other sites

post-13931-0-91212100-1352641850_thumb.j

post-13931-0-43553100-1352641872_thumb.j

Pretty good choices for your nano fishes!! :thumbsup:

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...