Jump to content

My DIY Cabinet


oceanviper
 Share

Recommended Posts

  • SRC Member

Just a preview of the acrylic sump tank before conducting water leak test.

 

 

IMG-20160930-WA0027.jpeg

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
44 minutes ago, Mike Stone said:

Oceanviper, where did you buy those precut to size acrylic? I like to buy some to make IOS for my 3 feet tank


Sent from my iPhone using Tapatalk

Hi Mike.

You can get those acrylic from Dama at Ubi or Ying Kwang at Jurong.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
12 hours ago, Mike Stone said:

Can you pm me the full shop name and address? Not sure who these shops are .
I assumed they cut to the shape and size I want.

Many thanks for help !

Sent from my iPhone using Tapatalk

You can google their address....

I don't have the actual address...

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

After leak test done on the sump tank....

Here are the end result with the sump tank, etc.....

The skimmer will be there while the drop-in coil will be behind the skimmer.

 

 

20161006_220944_resized.jpg

20161006_220927_resized.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Here are the bean animal overflow piping in progress...

 

20161018_182558_resized.jpg

20161018_182615_resized.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member

Piping has completed with the part connecting to my return pump.

Migration would be whole day require with the reusing the return pump, reconnecting the drop in coil into the new sump tank... not forgetting the transferring of the existing livestock and corals.

Here are the FTS of the tank.

Any suggestion on the rock scape for this configuration?

 

 

20161022_180703_resized.jpg

20161022_180747_resized.jpg

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

Here is the migration completed with rocks and live stocks transferred.

 

IMG-20161101-WA0008_resized.jpg

IMG-20161101-WA0009_resized.jpeg

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
I always have this phobia about acrylic giving way. So I must commend you for a brave move to use acrylic.

Hi Bro.
Thanks for the encouragement and is going to difficult to keep the acrylic clear without scratches during algae cleaning.....


Sent from my SM-N910G using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
Ya that's another thing to worry about. So how do you plan to prevent scratches?

I'll need to do more scrubbing to prevent algae from build up

Sent from my SM-N910G using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
Another thing. All the plumbing at the back any plans to concea it? Or are you allowing nature to take it's course and let the build up of coraline algae do the job.

No plan to conceal it.
Let the nature do the work..

Sent from my SM-N910G using Tapatalk

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
On 30/09/2016 at 7:55 AM, oceanviper said:

Just a preview of the acrylic sump tank before conducting water leak test.

 

 

IMG-20160930-WA0027.jpeg

May i know how you came out with this design? For your sump?

On 01/11/2016 at 7:30 PM, oceanviper said:

Here is the migration completed with rocks and live stocks transferred.

 

IMG-20161101-WA0008_resized.jpg

IMG-20161101-WA0009_resized.jpeg

I would like to know what kinds of lights are you using. AI? plus how you do up the frame?

Link to comment
Share on other sites

  • SRC Member
5 hours ago, sharonleong said:

May i know how you came out with this design? For your sump?

I would like to know what kinds of lights are you using. AI? plus how you do up the frame?

Hi Sharon.

I'm design based on the overflow configuration used and also how i have the compartment for the sump tank.

As for the lights, I'm not using any selling from LFS or off-the-shelves, I do my own LED lighting.

 

  • Like 1

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
18 hours ago, oceanviper said:

Hi Sharon.

I'm design based on the overflow configuration used and also how i have the compartment for the sump tank.

As for the lights, I'm not using any selling from LFS or off-the-shelves, I do my own LED lighting.

 

I would like to know how the flow of the sump design i'm curious. DIY LED lighting that cool any pictures?

 

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Member
12 minutes ago, sharonleong said:

I would like to know how the flow of the sump design i'm curious. DIY LED lighting that cool any pictures?

Hi Sharon.

Here is just one of the link which I use the aluminium u shape for the base of the led.

 

 

 

 

 

 

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

  • SRC Member
11 minutes ago, Darren Sim said:

Just wondering where you get those woods to diy? Planning to diy a wood if the cost is lower than asking someone to make


Sent from Singapore Reef Club mobile app

Hi bro.

Is depend on the types of wood as it varies accordingly.

With proper tools and space to do the DIY, probably the cost is lower comparing using the same types of materials.

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...