Jump to content

Pls advise... Strange sympton on my sps


Recommended Posts

  • SRC Member

Noticed all the sps seem to be swollen since light on today. There seems to be a transparent 'skin' / jell covering the body and branches of all the sps which I can't figure out.

Is this normal?

Anybody encounter this before?

A996F5F3-B7CD-41F8-9C2F-98ABD311EB56-193

F289AEF7-7B18-46A4-823E-C7EDD0EEA056-193

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

This is a clearer picture. Note that there is a outer jelly like skin. E023B818-70E9-4984-BBF3-79B353180D80-193

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Is it some type of bacteria bloom? Other then sps any other area of tank affected like live rocks?

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

No.. Only sps. Very obvious in digis, Millie and acros. Live rock is ok.. Lps seems fine too.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

If you are on biopellets I think better temporary stop cos you might be feeding the slime n encourage the spread.

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

I would quickly siphon them off. Reminds me of bad bacterial attack.

Just my experience from acans and blastos, though it's not necessarily the same.

Mike.

Unlikely to be bacterial infection.

Looks like Sps tissue balooning / gassy / blistering. It seems like a broad base photo inhibition that's cause by a sudden increase of carbon source dosing. If you have been dosing carbon source or other additives, suggest you stop for a while till the situation improves. For more detail...try to a search on this area and you will get some very useful insights.

Treat others the way you wanna be treated...

 

 

Link to comment
Share on other sites

  • SRC Member
I would quickly siphon them off. Reminds me of bad bacterial attack. Just my experience from acans and blastos, though it's not necessarily the same. Mike.
Cannot siphon lah. It's growing on the branches and seems like its own tissue. Similar to our skin have a water blister (水泡) I used a coral feeder to blow water at the affected branches and saw the bubble at the tip 'burst' And the jelly form on the rest of the body 'shrink' Let's wait and see if it comes back. I just stopped using bio pellets this morning. The only thing I added yesterday is fauna supplies pods. Water change was a week ago.. Maybe I will change water again. Last dose 'it's clear' about 4-5 days ago. Reef vital dosed about a week ago

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

Lawchan77: How are the sps with the slime?

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member

The bloated tissue lasted for about 3 days and went off by itself. Lost a couple of Walt smith colonies via stn. Those that survived turned brown in including the royal blue Millie. Never managed to find out the reason why... Now monitoring closely and hope to get the colour back.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member

The thing went off after biopellet off ?

Cheers,

James

Reviving my reef tank :

Crystal glass 53" x 22" x 17" rimless (inclusive of 12"x22"x17" IOS)

Life Reef HVS3-24 with mazzei venturi

ATI Sunpower 8 x 39w T5 (4 x Blue plus, 2 x Aqua blue special, Coral plus)

ZET Light 3 x 3w LEDs moonlight

Arctica 1/3 Hp + 1/4 Hp back up

Vortech mp40w x 3 + Jebao wp25

Eheim 1264 x 3 + water blaster 5000

Vortech back up battery

TLF-150 + Rowaphos

Activated carbon

Kamoer 3 channel + CaCl2 + NaHCo3

150L Refugium with DSB, miracle mud, cheato

2ft T5 x 2 light tubes for refugium

Link to comment
Share on other sites

  • SRC Member
The bloated tissue lasted for about 3 days and went off by itself. Lost a couple of Walt smith colonies via stn. Those that survived turned brown in including the royal blue Millie. Never managed to find out the reason why... Now monitoring closely and hope to get the colour back.
tat time my FT sps also encounter the same ballooning n after tat the "skin" of the sps just detached from skeleton. I remember I was messing with biopellets and other filtration to get my po4 down.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

  • SRC Member
The thing went off after biopellet off ?
Cannot conclude that it's biopellet cos I've been using biopellet for almost a year now when this happened. And apart from biopellet, I've also stopped all additives and go back to basics monitoring the water parameters closely. Still suffering the consequences of this incident.. I'm seeing tissue peeling from one or two heads of my royal blue Millie and snipping it off in an attempt to save the rest.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member
tat time my FT sps also encounter the same ballooning n after tat the "skin" of the sps just detached from skeleton. I remember I was messing with biopellets and other filtration to get my po4 down.
That's exactly what happened. Tissue detaching from skeleton at an alarming rate. Mostly from millies.

(click to see my tank thread)

Skimmer : Deltec SC2560

Chiller : Sanyo 1HP Compressor with copper coil

Lighting : Ecotech Radion XR30w x 3 + 5 ft ATI power module 4 tubes

Dosing - Bubble magnus 7 channel

Main pump - reef octopus 7000

FR : Skimz phosphate reactor + FR45 Biopellet reactor

Wavemaker - Vortech 3X MP40W + 1 x sun sun

Link to comment
Share on other sites

  • SRC Member
That's exactly what happened. Tissue detaching from skeleton at an alarming rate. Mostly from millies.
my experience was on the acropras. At first thought they growing... Until I saw once the "bubble" burst, the flesh just floats away, leaving bare skeleton. By the way, my experience is the whole frag had its flesh ballooned up. So no way to frag smaller pieces.

Tank size:36"x36"x24"

Return pump" 2x Reef Octo 5000

Skimmer:BK Double Cone 200 on Reef Octopus DC 5500s.

Wavemaker:2xVortech MP40wES

Chemical filtration:1xeducator FR(biopellets)

Chiller:1hp Daikin compressor.

Lighting:2 x Kessil A360we

Auto topup system: JBJ ATO + new jet 1200

Dosing system: Kamoer 3 channel.

Additives: ESV 2 part.

Power consumption

2XReef Octo 5000: 120watts

BK skimmer:50watts

2xVortech wavemaker:70watts

Daikin compressor:775watts

Lighting:180watts

Ato system:21watts

Exhaust fans:16watts

Refugium light:27watts

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 1

      Abortion pills in Kuwait(+96567069311)&get cytotic

    2. 1

      Abortion pills in Kuwait(+96567069311)&get cytotic

    3. 0

      Abortion pills in Kuwait(+96567069311)&get cytotic

    4. 0

      EXTRAWD : Situs Judi Slot Online Slot Gacor Hari Ini Dengan Slot Maxwin Tahun 2024

×
×
  • Create New...