EvolutionZ's Shallow reef build.

[Evolutionz 168]

i've been reefing for about 5 - 6 months now with a small 1ft cube and the poison got me and i upgraded to a tank 8 times larger.

Tank size : 120x60x36cm (12mm rimless)

Sump tank : 35x50x45cm (6mm)

Skimmer : Deltec MCE 600

Lighting : Maxspect G2 170W (26 white, 22 RB, 8 Violet)

Return pump : Eheim 1260

Chiller : Teco TR15

Substrate : CaribSea Special Grade reef sand (40lb)

Wavemaker : Jebao WP-40

filtration :

30kg Live Rocks, Rowaphos (with TLF reactor), biopellets and chaeto

Planned corals :

Mixed reef (softies and LPS mainly)

Hectic morning, went to buy Live rocks and few packs of NSW. Tank haven't arrive yet.

http://s961.photobucket.com/user/fissiden/media/DSC03059-1_zps59df6a45.jpg.html'>

started scaping. using 2 main big rocks and afew other smaller rocks. total 30kg used. should be settled for this

http://s961.photobucket.com/user/fissiden/media/DSC03064-1_zpsa226ed4d.jpg.html'>

http://s961.photobucket.com/user/fissiden/media/DSC03067_zps6417d33d.jpg.html'>

Tank arrived hours after settling for the scape. loving the shallow look!

http://s961.photobucket.com/user/fissiden/media/DSC03068_zps73750910.jpg.html'>

Sump tank, due to cabinet's not meant for sump (reuse cabinet from freshwater set up), have to customise an empty tank to be my sump. using overflow box to send water down.

http://s961.photobucket.com/user/fissiden/media/DSC03070-1_zps9ecaab5e.jpg.html'>

first time having a big rimless tank!

http://s961.photobucket.com/user/fissiden/media/DSC03072_zpsa7eba5b6.jpg.html'>

lights are hanged.

http://s961.photobucket.com/user/fissiden/media/2013-04-27200527_zps63d64e0d.jpg.html'>

Right now waiting for silicon to fully cure, before testing tank with water. will then start scaping the rocks on monday (2 days later) and filling with salt mix and start cycling!

Thanks for viewing!

[clownfish_forever 18]

Looks really cool. Shallow tank is getting more popular. Really interested to see how you going to scape it - lagoon island?

[Evolutionz 168]

Looks really cool. Shallow tank is getting more popular. Really interested to see how you going to scape it - lagoon island?

Thanks bro! indeed its popular.. i did show a scape above.. honestly i have no idea how i should scape it.. probably just going to placed the rock and see if the look pleases me.

[starfish123 30]

no sps?

[Evolutionz 168]

no sps?

will have SPS but not much.. still new in reefer

[erikokelf 22]

Look very nice bro. Should be very appealing once filled up with corals.

[Zee123 10]

Finally the tank is up and it's looking great! now waiting for you to set everything up

[james72 138]

Nice !

[Admiraltian 256]

Nice setup, will be looking at your scape when its finished. Should be nice to see with the shallow rimless tank look & once its filled with corals.

[Soong Yu Juan 2]

bro, my tank very similar to yours. Shallow is good choice.. Easy maintenance, easy to catch fish, easy to rescape. I eradicated a zoa eating nudibranch problem just by using hands and forceps. Also, choose your wave maker and sand with care or else sandstorm.

[mengyang_neo 43]

Hi bro, nice tank, I think I met u when u are picking up your rocks.

[Evolutionz 168]

Look very nice bro. Should be very appealing once filled up with corals.

Thanks bro! i hope so!

Finally the tank is up and it's looking great! now waiting for you to set everything up

Yeah man finally.. it was a long 10 days wait for the tank to arrive.

Nice !

Thanks!

Nice setup, will be looking at your scape when its finished. Should be nice to see with the shallow rimless tank look & once its filled with corals.

I hope i can scape it well!

bro, my tank very similar to yours. Shallow is good choice.. Easy maintenance, easy to catch fish, easy to rescape. I eradicated a zoa eating nudibranch problem just by using hands and forceps. Also, choose your wave maker and sand with care or else sandstorm.

yeah i love shallow too.. the wp-40 would be making a sandstorm if i use any fine sand.. using special grade (1 - 2mm) so should be fine.

Hi bro, nice tank, I think I met u when u are picking up your rocks.

Yes bro! Thanks for the great advice you provided! hope the fishes you bought are doing well..

[ambystoma82 19]

Hi Bro, some pointers from a shallow reefer point of view.

1) Since you are using an overflow for your tank to sump, unlike those sump incorporated in same tank type, are you able to control pump flow-rate? Least you can adjust the water level in main tank. REMEMBER to install non-return valves. Not sure back-flow will happen in your design, that is hell alot of water to mop out of the sump!

2) Not sure if your sump layout allows, but try to push all the tall skimmer items to the back. put the smaller footprint pumps near to you for easy maintenance. I notice you use cable tie for the hose connection, it should not leak if you use the correct hose size.

3) Based on your tank surface and sump surface, its about 1 is to 4 ratio for water level, be very careful when u do water change, the sump water level drops very fast.

4) For your cabinet height the view generally will be from top view, since i assume you would be kneeling down to view most of the time. Since you are putting wave maker, it is more ideal to place the wave maker towards the mid/lower level, else there wouldn't be any view with the water surface turbulent. Even when u solve this, there is still the reflections from the led bulbs.

5) U might want to consider going bare bottom, to prevent a sandstorm, for shallow tanks, you need to minus the sand height and the clearance for over-flow height, not sure if you have that much space left by then, we are always greedy for space. Bare bottom makes the vacuuming hell a lot easier. If you opt for full water tank level, be prepare to sacrifice some choices of jumping fishes.

6) Before all other events, it would be ideal to put vaseline on all hinges and screws ends, to keep the rust out.

7) Ensure u have enough ventilation for the chiller, not sure where u will be placing it.

8) Dont be lazy, there should be at least 3 pumps in your sump.

Good luck to the many more back-breaking weekends...

[Evolutionz 168]

Hi Bro, some pointers from a shallow reefer point of view.

1) Since you are using an overflow for your tank to sump, unlike those sump incorporated in same tank type, are you able to control pump flow-rate? Least you can adjust the water level in main tank. REMEMBER to install non-return valves. Not sure back-flow will happen in your design, that is hell alot of water to mop out of the sump!

yes got drill holes in return pipe to make sure theres no siphon going back in case the pump fails..

2) Not sure if your sump layout allows, but try to push all the tall skimmer items to the back. put the smaller footprint pumps near to you for easy maintenance. I notice you use cable tie for the hose connection, it should not leak if you use the correct hose size.

sump layout dosn't allow that, but i can pretty easily reach to the back for maintenance.

3) Based on your tank surface and sump surface, its about 1 is to 4 ratio for water level, be very careful when u do water change, the sump water level drops very fast.

Yes bro, sump is very small for the main tank size.. will take note!

4) For your cabinet height the view generally will be from top view, since i assume you would be kneeling down to view most of the time. Since you are putting wave maker, it is more ideal to place the wave maker towards the mid/lower level, else there wouldn't be any view with the water surface turbulent. Even when u solve this, there is still the reflections from the led bulbs.

i'll be sitting on my small ikea chair to view! viewing from top should be quite hard with the LEDs and water movement..

5) U might want to consider going bare bottom, to prevent a sandstorm, for shallow tanks, you need to minus the sand height and the clearance for over-flow height, not sure if you have that much space left by then, we are always greedy for space. Bare bottom makes the vacuuming hell a lot easier. If you opt for full water tank level, be prepare to sacrifice some choices of jumping fishes.

Honestly, i do not like the view of bare bottom.. in order to prevent sandstorm i chose carib sea special grade... hopefully its coarse enough to prevent sand storm.

6) Before all other events, it would be ideal to put vaseline on all hinges and screws ends, to keep the rust out.

Will be replacing the hinges with stainless steel hinges.

7) Ensure u have enough ventilation for the chiller, not sure where u will be placing it.

Chiller will be placed outside of cabinet.

8) Dont be lazy, there should be at least 3 pumps in your sump.

Dont really get what you mean.. but i guess i do have 3 pumps..

1) 1260 return pump

2) Eheim compact 1000 (chiller and rowaphos)

3) Biopellet pump

4) skimmer pump

Good luck to the many more back-breaking weekends...

Thanks bro! to be frank, its my 2nd tank and im only 6 months into reefing.. there's a TON of stuff i do not know about.. i've never had a sump tank before too. i hope all things goes well.

[surreal1228 66]

Nice tank bro. <br />Bro amb...is rigjt. Sum bit small and make sure cabinet stable.

[Evolutionz 168]

Nice tank bro. <br />Bro amb...is rigjt. Sum bit small and make sure cabinet stable.

Thanks bro! yes sump is indeed very small... but should be ok.. sump's 80L..

Cabinet used to hold 400L freshwater and 2x 30L salt water tank.. should be fine. got 8 legs on the cabinet!

[ambystoma82 19]

yes got drill holes in return pipe to make sure theres no siphon going back in case the pump fails..

sump layout dosn't allow that, but i can pretty easily reach to the back for maintenance.

Yes bro, sump is very small for the main tank size.. will take note!

i'll be sitting on my small ikea chair to view! viewing from top should be quite hard with the LEDs and water movement..

Honestly, i do not like the view of bare bottom.. in order to prevent sandstorm i chose carib sea special grade... hopefully its coarse enough to prevent sand storm.

Will be replacing the hinges with stainless steel hinges.

Chiller will be placed outside of cabinet.

Dont really get what you mean.. but i guess i do have 3 pumps..

1) 1260 return pump

2) Eheim compact 1000 (chiller and rowaphos)

3) Biopellet pump

4) skimmer pump

Thanks bro! to be frank, its my 2nd tank and im only 6 months into reefing.. there's a TON of stuff i do not know about.. i've never had a sump tank before too. i hope all things goes well.

i was referring don't use one pump to more than 1 equipment lolx.

Ease of maintenance is relative to age of reefers.... haha...

The whole idea of protecting the hinge is to keep the maintenance low, end of the day, we will change the tank in like 3-4 years time the most?

Stainless steel does rust, it just does not stain. The rust rate depends on the steel grade. Dip your knifes into one of those sps tanks and u will know what i meant.

I see your sump tank only use up to one door length, y dont make it 2 door length? is there some issues for the chiller placement?

[Evolutionz 168]

Cabinet is divided into 3 compartment.. So there's really no way I can go for a bigger sump tank. Chiller be placed beside cabinet do its well ventilated

[sunnymau 29]

Nice tank, all the best to ur setup!

[ambystoma82 19]

Cabinet is divided into 3 compartment.. So there's really no way I can go for a bigger sump tank. Chiller be placed beside cabinet do its well ventilated

i was thinking u could take out the plywood partition part without taking out the pillars. anyway it is conceal by the doors. it wont be ugly.

[Evolutionz 168]

i was thinking u could take out the plywood partition part without taking out the pillars. anyway it is conceal by the doors. it wont be ugly.

Cannot leh.. Try before.. The partition should be part of the support.

[justrc 3]

Nice tank but your cabinet look weak

[Evolutionz 168]

Nice tank but your cabinet look weak

Thanks. No worries about cabinet.. lots of support in the cabinet..

[Evolutionz 168]

Some updates.. filled the tank and sump with DI water straight to test for leak and to test out my overflow box..

previous owner mentioned he use 2400l/hr pump for the box. However my 1260 (2400l/hr) was too strong for the overflow box to handle. i'll be sourcing for a ball valve to restrict the flow of the 1260.. Reading online suggest that using ball valve on centrifugal pump like 1260 would not damage/overheat the pump, but instead, improve the pump life span since its gonna work less. Anyone know where to find ball valve to fit a 25/34mm pipe?

overflow and return..

the U-pipe in the overflow box is 1" diameter so it should be able to handle 2400l/hr pump.. no idea why it cant.. the return flow feels really strong though!

http://s961.photobucket.com/user/fissiden/media/2013-04-28230405_zps2f3a26b0.jpg.html'>

testing out the wp-40.. great waves at w1! but worried it may splash out..

http://s961.photobucket.com/user/fissiden/media/2013-04-28230409_zps6331141f.jpg.html'>

http://s961.photobucket.com/user/fissiden/media/2013-04-28230351_zpsc625e43d.jpg.html'>

Sump tank.. hopefully still got space for some chaeto

http://s961.photobucket.com/user/fissiden/media/2013-04-28230441_zps09a1b2c2.jpg.html'>

live rock still in pails.. each pail have a powerhead circulating the water.

http://s961.photobucket.com/user/fissiden/media/2013-04-28230425_zps17a0e7fb.jpg.html'>

[KELVINx3 9]

damn, shallow tank is the sex! too beautiful!