Jump to content

New 2ft tank


Land2013
 Share

Recommended Posts

Convert my freshwater tank to marine. Need advice on the list.

List:

Tank - 2ftx1.5ftx1.5ft
Sump - 2ftx1ftx1ft (DIY)
Overflow - DIY
Return Pump - JEBAO DC-3000 ECO
Chiller - Arctica 1/10hp - Use return pump
Light - Maxspect razor 120W 16K
Skimmer - Not decide
Plan to share the return pump with chiller. Now still can't decide the return pump and skimmer. Should I upgrade to Jebao DC-5000 and what skimmer better?
Link to comment
Share on other sites

How about a Bubble Magus Curve 5 or curve 7 for your tank. I bought the Curve 5 for my tank and quite like it even though it is rated for 500litres. The skimmer started skimming the junk after about 2 hours of running. It is also very silent and runs at only 8w. The footprint is 18.5cm x 18cm. Therefore, a 20cm x 20cm will be enough for this skimmer. The only sound coming out from my cabinet is the drain pipe but it is still very silent.

Tank: 3.5ft x 2ft x 1.5ft, 12mm

Sump: 3ft

Skimmer: Bubble Magus Curve 7

Lightings: Maxspect 15000k

Return Pump: Eheim 1252

Wavemaker: Jebao WP25, Jebao RW-8

Link to comment
Share on other sites

How about a Bubble Magus Curve 5 or curve 7 for your tank. I bought the Curve 5 for my tank and quite like it even though it is rated for 500litres. The skimmer started skimming the junk after about 2 hours of running. It is also very silent and runs at only 8w. The footprint is 18.5cm x 18cm. Therefore, a 20cm x 20cm will be enough for this skimmer. The only sound coming out from my cabinet is the drain pipe but it is still very silent.

Kindly pm the BM curve 5 skimmer price.

Link to comment
Share on other sites

  • 2 weeks later...

Why is it awful? Any pics?

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

How about a full tank shot :D

Sent from my GT-N7105 using Tapatalk

| Display : 48x30x22 Skimmer : SK-201 skimz

| Sump : 30x24x18 Wavemaker : 2x RW-15 , 1x RW-8

| Cooling : 1HP titanium drop in coil ATO : JBJ

| Lighting : ATI Sunpower 8x54w + 48x cree xte royal blue Return : Jebao dc-6000

| Dosing : Jebao dosing pump [ CaCl2 + NaHCO3 ] Pump :

| Reactor : FSZ Z160 zeolite reactor & phosban 150

| System : ZEOVIT

decomm-ed :

Ydkm SPS reef

:wub: >><< :wub:

Link to comment
Share on other sites

Bro, your filter sock is above the glass wall and need to becareful because once choke, the water will overflow from the top. Make sure it is not close to the glass wall to prevent spillage.

Tank: 3.5ft x 2ft x 1.5ft, 12mm

Sump: 3ft

Skimmer: Bubble Magus Curve 7

Lightings: Maxspect 15000k

Return Pump: Eheim 1252

Wavemaker: Jebao WP25, Jebao RW-8

Link to comment
Share on other sites

Nice boulder shape for ur rockscape. Lots of room to place corals.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...