Jump to content

Dieran's never ending Piece of Art


dieran_green
 Share

Recommended Posts

  • SRC Member

Hi all. 

Started a new 5 by 2 by 2 tank. I started my first tank way back in 2003 with a 2 feet tank back in Uni days ... Slowly it became a 3 feet. After decommissioning my 3 feet , I had a 4 feet and a 2 feet cube. But nothing great as I was quite lazy... So they were a soft coral tank ( 2feet) and a FOWLR tank (4 feet). My interest died down when I had a major itch out break followed by power failure with took a lot of my treasured fishes. 

Recently my FOWLR had a leak so I decided to take this opportunity and start all over again. Hopefully by starting a tank tread it will force me to be diligent in the maintenance of the tank. 

Will update more soon on the new tank.

Link to comment
Share on other sites

  • SRC Member

These are the specifications of the new tank:

Tankmaker: CR Aquarium 

Display tank: 5ft x 2ft x 2ft (12mm glass on the back and, 12mm crystal glass on the front, right and left view).

 image.thumb.jpeg.386634471942ff68c28ee73

Sump tank: 3.5 ft sump tank with 5 compartmentsimage.thumb.jpeg.c868dffdc6cbd399d0e60ba

It took me a while to decide on the sump tank design. Would like to "tank" Alex and Ah Heng from AM and Dan from CR for all their time and advice. The sump was made in mind of the skimmer I was intending to get which was SKIMZ SV253.

image.thumb.jpeg.65ae5e8420c575ff4097a51

image.thumb.jpeg.8e76afeb0be4344308355c6

 

Edited by dieran_green
Link to comment
Share on other sites

Camping here for more updates.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

Bro finally upgrade your tank.

What u intend to keep?

Sent from my SM-G920I using Tapatalk

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

Bro finally upgrade your tank.

What u intend to keep?

 

Sent from my SM-G920I using Tapatalk

 

 

Hi bro.. Yes finally... 

I intend to keep SPS.... But I still prefer my fishes .. So still deciding... No hurry.

Link to comment
Share on other sites

  • SRC Member

Bro mind to share your sum tank design in drawing going to make a tank this month looking for ideal for sum tank

 

 

Sent from my iPhone using Tapatalk

Hi Xeneryx,

image.thumb.jpeg.cbea4c304a7e1fcaf1d31f0Hope this helps. I left out the dimension becos I think that have to be custom to your tank. Basically, I wanted to have an opening in the cabinet door see the full length of the refugium that's why I pushed it to the front.  However due to constraints that openings did not happen.

Link to comment
Share on other sites

Hi bro.. Yes finally... 

I intend to keep SPS.... But I still prefer my fishes .. So still deciding... No hurry.

I think having a lot of fishes and sps are possible but u will have to be hardworking in maintaining the water to be in tip top condition. U have a strong skimmer, so u have to decide whether u want the dosing method or the water changing method.

Sent from my SM-G920I using Tapatalk

5x2.5x1.5ft Rimless Dream Tank (06/03/12)
Skimmer - Reefoctupus

Return Pump - 1 x Eheim 1264, 1 x water blaster 7k
Wavemaker - 2 x mp40es
Chiller - Daikin compressor with coil drop in
Lighting - 4 x 80w T5 Pair 1(6hrs23/12/12),Pair 2(16/06/12312hrs 2 x 80w De-lighting Retrofit (1/3/12) -(15/11/12)6hrs and 2 x 80w De-lighting Retrofit (13/10/12) -6hrs)
Reactor - Dosing pump (01/01/11)


Link to comment
Share on other sites

  • SRC Member

Now now that the tank has been set up, it was time for rock scaping. I always have been a fan of unique rock scapes. In the past, I would buy mushrooms all becos I like on the rocks they attached on.

Sad to say I couldn't reuse many of my 4 feet FOWLR rocks as the tank was exposed to copper treatment in the attempt to save my fishes. Many of them were Tonga rocks which made it all the more heart aching. 

image.thumb.jpeg.98b2b568eb8d1f51d4cf1dd

image.thumb.jpeg.7317d3be6e5e97dfaa39617So before I went rocks hunting ... I had a good look on what rocks I have left that can be used and bought expoxy to see what I can come up with.

image.thumb.jpeg.07097c9ecc0de3c52f927b2image.thumb.jpeg.70544b9b4688f4a09eba00e

After the epoxy had dried ... I tried to combine to see what shapes I could come up with... image.thumb.jpeg.6e611314a8a7c69af1a8238Of all the pieces, I like this the most,

image.thumb.jpeg.3a40b756c82ae3707a16369

Different angle of the same rock piece.

image.thumb.jpeg.72536c77428b56536a26f04

Link to comment
Share on other sites

  • SRC Member
Hi Xeneryx,

http://www.sgreefclub.com/forum/uploads/monthly_2016_01/image.jpeg.c70a64d77ca351aaa9582db4a592269f.jpegHope this helps. I left out the dimension becos I think that have to be custom to your tank. Basically, I wanted to have an opening in the cabinet door see the full length of the refugium that's why I pushed it to the front.  However due to constraints that openings did not happen.

Thanks for the drawing

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • SRC Member

Since I am intending to venture into SPS keeping... Lighting is definitely an issue... Bro Alex was recommending ATI sun power module (8 T5 tubes) as its really value for money.... But ..... I do love the shimmering effects of LED. However you have to admit that certain corals look better under T5. As a result I wanted a mixed but ATI hybrid is too costly in my opinion. 

I ended up paying Dr Evil a visit to see what were my options. After Iilttle discussion... We came with this solution.image.thumb.jpeg.b04734f89265c244b46c5c6

photo taken from Dr Evil thread. Custom Fixture of 3 AI hydra twenty six HD and 4 Giesemann T5.

image.thumb.jpeg.9fc386e1382f4d6831eb721

Fixture after installation.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...