Jump to content

My Slice of Nature (Part 3)


SubzeroLT

Recommended Posts

  • SRC Supporter

Cause related to DOC may be hard to prove without controlled experiments & proper equipment. What I have is anecdotal data which may not be able to demonstrate root cause or nail down to the factors affecting the result. Bacteria is a new topic & am keen to explore more.

I did notice 2 incidences of massive SPS RTN (really overnight) several days apart. A slimy cloud was observed just above the rocks. Sections of various SPS colonies in contact with the slimy cloud had the flesh peel off overnight. Everything else above it was OK. In both incidences, the tank were fed with Ocean Nutrition Oyster Feast the night before. Don't get me wrong.... Oyster Feast is fantastic food for the tank. But this bottle went bad -> And hence I was actually dosing massive ammonia laden liquid onto the corals. 

Once the cloud was turkey basted away, the RTN stopped. Coral did not recede further.

I mention this here to highlight the importance of ensuring you feed the freshest food possible. I noticed something odd on this bottle of Oyster Feast. Whenever the cap was popped open, there was air gushing out (like opening a coke bottle). I didn't recall this in previous bottles used. I supposed that it'll stink of fishy stuff if it had gone bad. But instead it smelt a little sour. I thought it was odd but continued to use it because good money was spent of it. (just a week old...$30 bottle of food).  After 2 incidences, I put some oyster feast under the microscope. 2 observations :

1) Bubbles continued to form between the 2 layers of glass slide. Some kind of gas (CO2? Nitrogen?). The drop of oyster feast is fermenting.

1846015713_P4090347(Medium).jpg.44e05592adec361335da722856eda0fe.jpg

 

2) The liquid was quite clear. Very tiny bits were present but most of it was liquid. It is very different from microscopy pic of what it should look like.

497279995_P4090353(Medium).jpg.425999fed17df22084875224babe5653.jpg

 

My conclusion is that the food had gone bad. The addition of this increased the level of ammonia / DOC, arising in a cloud of ciliates. Some reefers may refer this as 'bacteria cloud' which in reality is a bacteria layer loaded with ciliates.

 

 

  • Like 3

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

It has been one month+ since using the Mastertronic. And about 3yrs+ with the Alkatronic. There has been queries from fellow reefers along the way. I'll share some pics & comments here.

Let's start  with Mastertronic.

Configuration & setup Mine is set up to run Ca, Mg, PO4 & NO3. 

While the Mastertronic is able to test Alkalinity (using Salifert test kit), I configured mine to skip alkalinity and continue to use Alkatronic to measure this parameter. Alkatronic uses its own proprietary reagent to measure the change of pH using a pH probe. Each bottle can last ~2500 tests => at least 1.5yrs based on 4 tests per day. Moreover, the Alkatronic has an extra dosing pump to automatically dose alkalinity solution when it drops below the range.

2058344008_20210330_080530929_iOS(Medium).jpg.1ba4fb9c12eed1545a2394deff202811.jpg

 

Accuracy The Mastertronic use various test kits major brands, namely Red Sea (Phosphate, Magnesium), Fauna Marin (Nitrate), API (Calcium), Salifert (Alkalinity). I did some manual testing using the same test kits just to check accuracy. Mastertronic is spot on accurate for all the parameters. However, I did notice that Magnesium seems to read higher on Red Sea test kit compared to Salifert Magnesium. I'd trust the Red Sea Magnesium test kit a little more since it is all liquid reagents. On the other hand Salifert kit uses some crystals in the testing that is quite hygroscopic (absorbs moisture). I suspect this affects the accuracy since I'm actually adding less crystals when its laden with moisture. In any case, the small difference does not bother me.

 

Overall the Mastertronic has been quite problem free. A couple of things to take note during installation. Some have complained of bent needles. I've not had any issues personally. I suppose its important to ensure the needle is fully inserted & fairly straight.

1717992093_P1010383(Medium).JPG.d155bb71ab39c2b2531ddce7700eb835.JPG

 

A more likely cause of bent needles is improper positioning of the vials of reagent. The bottles must be fully inserted in the carousel. If the cap is not fully closed, the top may not slide in properly and result in the needle poking the plastic lid (instead of the silicone membrane). The needle may also bend further if its inserted at an angle, into an unclipped & moving vial.

1059953093_P1010387a(Medium).jpg.766202aae9f523be6c744bb10ed1cbd0.jpg

This is the inside view of the Mastertronic.175992440_IMG_9033(Medium).JPG.0c61dd78e364e2436cc5b85b6f1bdca9.JPG

 

At work, my boss often says "What gets measured gets done". In the same way, having water parameters get tested on its own, on a regular basis, ensures you are on top of water parameters. Encourages one to take action towards the target numbers. My numbers are not perfect but getting there. 

20210309_011733000_iOS.png.7add4a5e114951498edcc5591e352af3.png

 

Test frequency :

  • Nitrate : 1x a week
  • Phosphate : 2x a week
  • NO3 : 1x a week
  • Magnesium : 1x a week
  • OLI : 1x a week
  • Alkalinity (via Alkatronic) : 4x a day

So far, all is good with the Mastertronic. New firmware updates are pushed down to the unit automatically and cloud connectivity has been reliable. As with any new products, we expect to see more firmware releases in the initial months as corner case bugs get resolved. So far none has affected my operation. 

 

Next topic on Alkatronic. its been a workhorse since February 2018 (see original post here https://www.sgreefclub.com/forum/topic/142862-my-slice-of-nature-part-3/?do=findComment&comment=1318876)

Looking back, it probably saved my tank on several occasions. I will never run a tank without one. From the 4x daily KH measurements, you are able to understand what's going on.

  • KH dropping very fast during the day (when lights are on). I'm using a calcium reactor. Tank consumes about 1.7dKH a day. With the alkatronic, it is possible to detect if the calcium reactor outlet tube is clogging as less effluent is coming out. This happened before when I was away on a business trip. I then triggered a fellow reefer to my place to unclog the calcium reactor. In the meantime, the Alkatronic was dosing alkalinity solution till help arrived.
  • KH decreases gradually over the week. This could either be the dosing is slowing down gradually (measure it). Or a sign that the corals are consuming more
  • Unable to hold KH levels. Bigger than usual swings from day to day. This is a tell tale sign of low salinity. I usually get this if salinity drops to about 1.023 - 1.024SG (instead of 1.026 / 35ppt)
  • KH increases gradually over the week. There could be 2 reasons 
    • More is being dosed. Check calcium reactor effluent rate or dosing pump accuracy
    • Corals not growing / consuming (more likely case). When this happens, its usually some water parameter is out of balance. Usually I'll detect that potassium is very low (eg. 350ppm instead of target 400ppm) or Magnesium (1260ppm instead of target 1400ppm). I've also noticed that dosing trace elements increase consumption slightly.
  • KH increases beyond 13dKH. This is usually a hardware fault. The maximum that Alkatronic can read is 13dKH and give a Code3 error. The unit determines the kH level based on the amount of reagent added. Higher alkalinity if more reagent is added. 
    • However if the reagent nozzle is clogged, no reagent is dispensed into the beaker, but the unit is still counting the volume. Check the pink nozzle. Unclog it. In my case, I snipped a bigger hole and recalibrated the pump. The issue didn't come back again.

1947629220_IMG_8932a(Medium).jpg.b93a5b7e037c745119ed6f730bcd388f.jpg

    • Reagent tubes leaking. The only tube that has a higher chance of leaking is the 1.6mm one for the reagent. It stretches over a acrylic tube. Especially if you tug & pull it, it can develop micro holes or cracks over time. 
    • As a preventive step, I snip off the ends ever 6 months or so.

315862682_IMG_8934(Medium).JPG.b7da8513b90a2e277155fbd63752a643.JPG

 

This is what it looks like after 3 years of use. 

The internal peristaltic pump tubes and the 1.6mm reagent hoses have been changed once around the  2.5yr mark. You can see from the color of the hoses.  The pH probe is still the original set. Its calibrated once every 6-9 months.

1341362003_P1010377(Medium).jpg.3d8010be7277f899eeaa6f2aad1ebf5b.jpg

 

I've changed the hoses once so far. They weren't leaking or anything but just a preventive move. 

645232421_P1010380(Medium).JPG.e4747c0050bc84036c1ab96dbf53582a.JPG

 

 

 

  • Like 2

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Picked up a frag from fellow reefer recently. All the best on your future plans.

1020065114_IMG_8746(Medium).JPG.254c1596c2178ec2b302b996dfc15a3f.JPG

 

Here it is in my tank. Hope I can maintain the lovely colors.514584185_P4170586(Medium).JPG.ad99d687e9a0b8d7e103ad90a28970aa.JPG

 

Some other pics taken yesterday. Most with yellow filter.

 

Bali shortcake (From Coral Fanatics SG)1205165822_P4170593(Medium)(1).JPG.5751f04460380389cbf2e312f0bfb633.JPG

 

Divaricata (From Coral Fanatics SG)1988321313_P4170565(Medium).JPG.46f5f93b0ce7417cbb9cc2034e900083.JPG

 

Space Invaders Pectinia (From Coral Fanatics SG)325811484_P4170604(Medium).JPG.a1f83e85e9ad2539750a437486b2a830.JPG

 

Horrida (From Reefing Reality)786150386_P4170599(Medium).JPG.9e296bca1cab8e859108b4ef2c056e08.JPG

 

From reefer (originally from S5)

1730794606_P4170567(Medium).JPG.3359e1d8abdbb9196ae7f4d41d4b4c1b.JPG

 

1809767455_P4170561(Medium).JPG.5993d9bd57bc08d839bbbfbf5c4bcebf.JPG

 

Love the colors of this branching hammer (From Coral Fanatics SG)1810333216_P4170556(Medium).JPG.71230f144aa11606abf3e1e91c8d5c04.JPG

 

Holy Grail torch

1151516864_P4170562(Medium).JPG.91f6e7d3b7b80a9228432932cf13ab40.JPG

 

Fiji pink birdsnest

2023652350_P4170548(Medium).JPG.423b2a73ed5367f28d1886d6548e1cdd.JPG

 

 

  • Like 4

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter
On 4/18/2021 at 10:39 AM, R0B said:

I second that hahaha. Have you ever thought of doing a live stream q&a ?

Sent from Singapore Reef Club mobile app
 

Ha...did a short one during the last SRC Visits event on 21st March. Can always do another one if there is enough interest. But I think there are more interesting folks to chat with :)

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter
Received some queries what I feed my tank, how if it affects nitrate levels, and my opinion on Reed Roids.
 
I feed minced fish/prawn meat & pellet food to the fishes daily. And Reef Roids to the corals about 3 times a week.
 
Specific for Roids Roids, it’s a very good zooplankton based food for SPS, LPS and filter feeders.
Broadcast feed is perfectly fine. In my case, both the return pumps & wavemakers go into feed mode, so the bits float around the display tank longer and be captured by the coral polyps. 
 
1684761655_IMG_9014(Medium).JPG.7f14e90e25f26c1ab42256b6108e9e4f.JPG
 
Mix with a bit of tank water to make it relatively thick.
887056971_IMG_9016(Medium).JPG.57eb42e3e52672510b7c60e15a2e2a19.JPG
 
 
 
But most of the time, I’ll turn off the return pump and wavemakers then target feed the corals. And enjoy the sight of the corals’ feeding response. After 15-20min, turn on the wavemakers to allow the food to circulate in the display tank. After a further 10min, turn the return pumps back on. No big issues with nutrients. A quick check last week showed its 6.3ppm, which is alright.
 
1234440189_IMG_9107a(Medium).jpg.182ffb6298f95c4ca546bc5fa9c80314.jpg
 
 
Gonios love it.
2083264558_P4170405(Medium).jpg.75c633f6661791076a48359dc1489a87.jpg
 
 
While some can get away with not feeding SPS corals, I find they fare much better with feeding.  Also, polyps will extend more regularly, especially for millipora. 
 
73468634_P4170412(Medium).JPG.a91efb7eb86745a428e7d74f124602cd.JPG
 
 
1666460016_P4170429(Medium).JPG.fb021c28a714515611445ebd8101416a.JPG
 
 
It’s interesting to see how some LPS respond to fine food - they secrete a mucous layer to capture the reef roids then suck in through their mouth .
 
74258668_P4170533(Medium).JPG.c5d222c2d22620db426bbe7d81563362.JPG
 
220925600_P4170535(Medium).JPG.47eb6af16c8800d22f3b6174604ae1b6.JPG
 
A quick video :
 
  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

I have this particular pink birdsnest frag that has stubborn bubble algae that keeps coming back despite best effort to scrape off the bubble algae (out of tank).

2051210309_IMG_8657(Medium).JPG.71219efdc3ae6a56ace9b7d63ee0c8e3.JPG

 

While we know that zoanthids in general are tolerant of diluted hydrogen peroxide dips, the general belief is never to let Hydrogen Peroxide (H2O2) touch SPS. As a last resort, I dipped it in about 0.3% H2O2 for about 1-2 minute after manually removing as much bubble algae as possible. You can see the frag bubbling away.

72588986_IMG_8659(Medium).JPG.26d698cd83e4cd900d6b938efb47c408.JPG

That frag was dipped on 4th April. Its alive & growing well today :)

 

Some will take the safer route of using Vibrant.

But if you have just an isolated case & want to use H2O2, its at your own risk.

Best to 'test' with a small frag ahead of time. Below is the dilution recipe for 3% H2O2 to 0.3%. Add 10ml of H202 (3%) to 90ml of RODI water (to make a final volume of 100ml). 

548461691_Dilutioncalculator.PNG.bd6d0cdb3b23ae31401795425d2f5c71.PNG

 

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...
  • SRC Supporter

Faced some Alkatronic issues the past few days. Sharing how to self debug & resolve.

From the chart, it shows the reagent pump (C) is sensing that it is dosing a lot of reagent (hence the high KH).

Two possibilities - the pink nozzle tip of the reagent is clogged. Or there is air in the reagent tube (and hence dosing less liquid that it really should be)

 

857198447_IMG_9813(Medium).jpg.f6eda22d2dead953a77b8a6dd1e24ac8.jpg

 

A quick visual check confirms there is air bubbles in the reagent line after the peristaltic pump. No no air bubbles coming from the reagent container.

313403908_IMG_9767(Medium).JPG.3817601d6118c78d2feea67041933d9a.JPG

 

Did a quick pump C prime to try to pinpoint the source of the hole. Found a pinhole at the fitting joint.

1291613791_IMG_9815(Medium).JPG.ff62faadccd99e36fc6fcd6b165d1a3c.JPG

 

Snipped the end off. Primed the hose & its its all resolved.

1400516731_IMG_9816(Medium).JPG.6d3e8799df60c270ac60212178d47832.JPG

 

Alkatronic has been running since Feb 2018. Hoses get worn out over time. Either change it as part of preventive maintenance or have some on standby just in case.

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Abalone feasting away at the algae before the glass & wavemakers are cleaned.

1709157008_IMG_9820(Medium).JPG.26a29521b41135c242695eda09b9ba7c.JPG

1384742750_IMG_9827(Medium).JPG.20e639cef45510ca269d76e7a8eb987f.JPG

 

In an attempt to spread out the max mini carpet anemone, I pried one off the mother colony area.

1206503660_IMG_9829(Medium).JPG.e4b9887d141dfe952cbd00608cd6c84f.JPG

 

Placed it in a ricodea saver container with mesh top (https://reefmarketsg.com.sg/product/aquaticexclusive-ric-saver-cover/

 

406713695_IMG_9830(Medium).JPG.d7c683e8001de458c920ed7aa9cddd0e.JPG

 

 

2094834589_IMG_9846(Medium).JPG.e0729f8ba0099016e1902e5165979a2c.JPG

 

Let it really sink its foot onto the rock for 1-2 weeks before taking it out of the container.

974198743_IMG_9840(Medium).JPG.00c27a38dec907d6e0280cf873fb7fd3.JPG

 

Quick video from today.

 

  • Like 2

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

A video update this time round of topping up my DIY kalk stirrer.  This was made from an old Skimz skimmate collection container that Larry passed to me some time back. Stirrer is using a magnetic stir bar & old PC fan underneath. Details of the build is in earlier posts in this thread.

Kalk is dosed 24/7 but at a much higher rate at night than during day time using a Versa peristaltic pump. All ATO water passes through the kalk reactor - primary reason is to boost pH.

Here is a video of the top up process.

 

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

A video update this time round of topping up my DIY kalk stirrer.  This was made from an old Skimz skimmate collection container that Larry passed to me some time back. Stirrer is using a magnetic stir bar & old PC fan underneath. Details of the build is in earlier posts in this thread.
Kalk is dosed 24/7 but at a much higher rate at night than during day time using a Versa peristaltic pump. All ATO water passes through the kalk reactor - primary reason is to boost pH.
Here is a video of the top up process.
 
 

Nicely done!


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

  • SRC Supporter

Some random pics from the past few days.

 

Male blue eye anthias and his harem of 3 females.

91300224_P5310679(Medium).jpg.5c521cedb9cc966e92ad5e2d8773ee49.jpg

 

The anthias' fav spot - within the branches of the bali slimer

2113814598_IMG_0263(Medium).JPG.4b7340faf6c9c32c9a5bbf2238dd5d8b.JPG

 

Tuxedo urchin on the glass

494462224_P5310627(Medium).jpg.6d0bcd520a248ae965f8c0bc11144e30.jpg

 

Tunicates shedding its slime coat

1010652536_IMG_0278(Medium).JPG.9fff9c3121e930529b75913159664fc8.JPG

 

Harvesting hair algae grown on a mesh

857276995_IMG_0253(Medium).JPG.b86c457aace25b567dbc58613e04fb61.JPG

 

Grown in this 'refugium box' that's straddling over the sump. Lit by AI Prime Fuge

977197966_IMG_02801(Medium).jpg.fb085646a94ab1b2b029fe4443c47731.jpg

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

One week after harvest, the hair algae in the refugium is growing back with a vengeance.

808312995_IMG_0401(Medium).JPG.a15e0c86e34f3839a888b938db8dd402.JPG

 

Light schedule for the AI Prime Fuge. About 6.5hours light off during the day time.

IMG_0404.PNG.414e6e760db59c0fd60883d39413f7a7.PNG

 

 

Did some parameter checks over the weekend.

Magnesium was found to be 1260, so I manually mixed some Magnesium & dripped in. Increment 100ppm in 1 day

Potassium was surprisingly low at 320ppm, so similarly, I'm now raising it at incremental 20ppm per day. Target to reach 400ppm by Tuesday.

Salinity was also found to be a little low -> 34ppt. So i mixed some super saturated mixture in a small tub to drip in. Do this a couple of times until 35ppt is reached.

37140957_IMG_0400(Medium).JPG.e70525952ed2fa657ef660560531d3bd.JPG

 

Found some media in a old CR secondary chamber reactor. Used that to top up the calcium reactor. In the meantime, I've ordered some new media from ReefmarketSG. 

1899587135_IMG_0387(Medium).JPG.815bea5dc51c14491f721363b4d01d94.JPG

 

Changed out the CO2 tank at the same time as the tank pressure started to drop from 1000psi to about 600psi. The last tank lasted 5.5 months. And as you can see, I label everything. Just in case I forget that the tank is empty & forget to bring it for top up.

940481263_IMG_0393(Medium).JPG.f8caad4033eaa33e518dffea34fa4ee0.JPG

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Some mobile phone pics.

 

Tops down view. Love these lights.

The basket across the middle brace is useful for clipping on a basket. That space is used for keeping max mini carpet anemone or any loose frags temporarily. 

1667846157_IMG_0621(Medium).JPG.e5d78d9df7bc156e020eac70036b5bd6.JPG

 

White light view 

1683434425_IMG_0648(Medium).JPG.22cc8ce826d4590a942e32ae07ff1ad1.JPG

 

Water change over the weekend. Some out of the water photos. 

996343996_IMG_0669(Medium).JPG.30a07a61d24b42940b3c861e7a9b4aac.JPG

 

No issues out of water for 30min. If beyond that, i'll just splash some water on it.

1993882916_IMG_0696(Medium).JPG.45a824545d2cd096ca85453e4b370c6a.JPG

 

 

495680101_P1011658(Medium).jpg.1caab0528c7adca91e9193e4c1a48b01.jpg

 

Holy grail out of water. 

1754255009_IMG_0703(Medium).JPG.4da775abaa5163b0b13301f5a8c1abc6.JPG

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Yellow filter photos. Some love it. Some hate it.  It provides a better representation of colors of certain corals we see under blue light that is typically not possible to photograph. At times it over exaggerates the fluorescent colors of LPS. 

Coral fluorescence is determined by the glow (or scientifically called "expression") of green fluorescent like proteins (GFPs).  Even though the name says Green Florescent Proteins, they come in various colors - from cyan to red & yellow.

Quick google research suggests that fluorescent proteins (FPs) are reported to play an important role as photo-protectants and antioxidants in corals subjected to stressful temperature conditions. That is, to act as a screen to protect the algal symbionts (zooxanthellae). GFPs have peak emissions around the 485nm range.

OK....anything more is beyond my level of understanding. Let's just enjoy some pictures instead.

 

White light (no yellow filter) vs Blue light (with yellow filter) comparison. No color enhancement via photoshop.

648116373_IMG_09081(Medium).jpg.325ab0e490f9bd6122f11e42ca74ce65.jpg

 

1842493399_C3(Medium).jpg.e3b5988ba4c8eebf93b879c96369b986.jpg

 

1164708300_C2(Medium).jpg.5c9fa2b06a0f14d085fbcb7b53c104d9.jpg

 

228959663_IMG_08971(Medium).jpg.a68aeb29447d9d1e4d0275290ca72437.jpg

 

Other pics with yellow filter (no photoshop)

Miyagi Tort (frag  previously from Mike Stone)

112550949_P6191678(Medium).jpg.6f9caf2d236a8f70b9781c607b760097.jpg


205637366_P6191730(Large).jpg.2d7f5353e03fcb3151daea23bce87c6f.jpg

 

59280348_P6191736(Large).jpg.7fcc5847699d49e0b3d9009c8ab53103.jpg

 

Frag previously from Vik1929301635_P6191738(Large).jpg.06443806b5025154ccd7691ab7cd0201.jpg

 

1644827063_P6191753(Large).jpg.f1368fc25c822ea6b584ba7bcc3ebc63.jpg

 

Hosting this pectinia for a friend

1403185654_P6191776(Large).jpg.76847aabc5949958594a8dc57f2ba6ca.jpg

 

 

 

  • Like 2

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

Got a nice Aussie blue stag from Reefing Reality. Don't see stags in shipments very often.

1494313729_IMG_0893(Large).JPG.b77ffc1c1ac6df1cea986bad1742c981.JPG

 

Hope I'm able to hold the colors

26315356_IMG_0907(Large).JPG.266cebc0ae1033fad3a8bfce0f10af51.JPG

 

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • SRC Supporter

iPhone pic of the Bugatti Chalice.

June 2021. Just realized that the mouths look much larger now compared to a year ago. It grew about 1.5cm radially but has since been trimmed.

2040565099_Chalicebigmouth.jpg.a6a2053d0192d05cdf8750bedd244649.jpg

June 2020560998471_20200616_131754013_iOS(Large).jpg.3ad86171d643a5ce44633c2acd68060f.jpg

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Supporter

Got some emerald crabs from Coral Farm recently. In the past, I tried to get a mix of male & female in an effort for them to breed in the tank. That never happened. In any case, this is a male. 

1860955340_IMG_1178(Large).JPG.1a0fee038a108c63443c2814d9d3889c.JPG

 

Restocked on salt1945227092_IMG_0950(Large)(Large).JPG.df610b09cf4518fb327f40e1be1e7d1c.JPG

 

It appears I'm one of the very few reefers who remix the salt to ensure they are homogeneously mixed. This is to ensure maximum consistency of the entire bucket. Regardless whether its synthetic or evaporated salt, not all particles will be of the same size.  And there is a natural tendency for large particles to be at the top. And small particles settling at the bottom of the bucket during transit vibration. This is fundamental physics - something called granular convection

( Wiki : https://en.wikipedia.org/wiki/Granular_convection)

1163311040_IMG_1076(Large).JPG.784df2e09e07f7e32c1f959fd7493481.JPG

 

 

 

  • Like 1

Facebook : https://www.facebook.com/mysliceofnature/

 

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 6

      Decom - RSR 170

    2. 0

      WTB Salt

    3. 0

      Clearing Corals

    4. 0

      WTB: Yellow wrasse

    5. 0

      {PAPA GIFT} LOST LOVE SPELL CASTER IN SOUTH AFRICA +256707994890 Spell pay after results mofolo,Tshiawe

×
×
  • Create New...