SRC Supporter SubzeroLT Posted April 16, 2021 Author SRC Supporter Share Posted April 16, 2021 Cause related to DOC may be hard to prove without controlled experiments & proper equipment. What I have is anecdotal data which may not be able to demonstrate root cause or nail down to the factors affecting the result. Bacteria is a new topic & am keen to explore more. I did notice 2 incidences of massive SPS RTN (really overnight) several days apart. A slimy cloud was observed just above the rocks. Sections of various SPS colonies in contact with the slimy cloud had the flesh peel off overnight. Everything else above it was OK. In both incidences, the tank were fed with Ocean Nutrition Oyster Feast the night before. Don't get me wrong.... Oyster Feast is fantastic food for the tank. But this bottle went bad -> And hence I was actually dosing massive ammonia laden liquid onto the corals. Once the cloud was turkey basted away, the RTN stopped. Coral did not recede further. I mention this here to highlight the importance of ensuring you feed the freshest food possible. I noticed something odd on this bottle of Oyster Feast. Whenever the cap was popped open, there was air gushing out (like opening a coke bottle). I didn't recall this in previous bottles used. I supposed that it'll stink of fishy stuff if it had gone bad. But instead it smelt a little sour. I thought it was odd but continued to use it because good money was spent of it. (just a week old...$30 bottle of food). After 2 incidences, I put some oyster feast under the microscope. 2 observations : 1) Bubbles continued to form between the 2 layers of glass slide. Some kind of gas (CO2? Nitrogen?). The drop of oyster feast is fermenting. 2) The liquid was quite clear. Very tiny bits were present but most of it was liquid. It is very different from microscopy pic of what it should look like. My conclusion is that the food had gone bad. The addition of this increased the level of ammonia / DOC, arising in a cloud of ciliates. Some reefers may refer this as 'bacteria cloud' which in reality is a bacteria layer loaded with ciliates. 3 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted April 18, 2021 Author SRC Supporter Share Posted April 18, 2021 It has been one month+ since using the Mastertronic. And about 3yrs+ with the Alkatronic. There has been queries from fellow reefers along the way. I'll share some pics & comments here. Let's start with Mastertronic. Configuration & setup : Mine is set up to run Ca, Mg, PO4 & NO3. While the Mastertronic is able to test Alkalinity (using Salifert test kit), I configured mine to skip alkalinity and continue to use Alkatronic to measure this parameter. Alkatronic uses its own proprietary reagent to measure the change of pH using a pH probe. Each bottle can last ~2500 tests => at least 1.5yrs based on 4 tests per day. Moreover, the Alkatronic has an extra dosing pump to automatically dose alkalinity solution when it drops below the range. Accuracy : The Mastertronic use various test kits major brands, namely Red Sea (Phosphate, Magnesium), Fauna Marin (Nitrate), API (Calcium), Salifert (Alkalinity). I did some manual testing using the same test kits just to check accuracy. Mastertronic is spot on accurate for all the parameters. However, I did notice that Magnesium seems to read higher on Red Sea test kit compared to Salifert Magnesium. I'd trust the Red Sea Magnesium test kit a little more since it is all liquid reagents. On the other hand Salifert kit uses some crystals in the testing that is quite hygroscopic (absorbs moisture). I suspect this affects the accuracy since I'm actually adding less crystals when its laden with moisture. In any case, the small difference does not bother me. Overall the Mastertronic has been quite problem free. A couple of things to take note during installation. Some have complained of bent needles. I've not had any issues personally. I suppose its important to ensure the needle is fully inserted & fairly straight. A more likely cause of bent needles is improper positioning of the vials of reagent. The bottles must be fully inserted in the carousel. If the cap is not fully closed, the top may not slide in properly and result in the needle poking the plastic lid (instead of the silicone membrane). The needle may also bend further if its inserted at an angle, into an unclipped & moving vial. This is the inside view of the Mastertronic. At work, my boss often says "What gets measured gets done". In the same way, having water parameters get tested on its own, on a regular basis, ensures you are on top of water parameters. Encourages one to take action towards the target numbers. My numbers are not perfect but getting there. Test frequency : Nitrate : 1x a week Phosphate : 2x a week NO3 : 1x a week Magnesium : 1x a week OLI : 1x a week Alkalinity (via Alkatronic) : 4x a day So far, all is good with the Mastertronic. New firmware updates are pushed down to the unit automatically and cloud connectivity has been reliable. As with any new products, we expect to see more firmware releases in the initial months as corner case bugs get resolved. So far none has affected my operation. Next topic on Alkatronic. its been a workhorse since February 2018 (see original post here: https://www.sgreefclub.com/forum/topic/142862-my-slice-of-nature-part-3/?do=findComment&comment=1318876) Looking back, it probably saved my tank on several occasions. I will never run a tank without one. From the 4x daily KH measurements, you are able to understand what's going on. KH dropping very fast during the day (when lights are on). I'm using a calcium reactor. Tank consumes about 1.7dKH a day. With the alkatronic, it is possible to detect if the calcium reactor outlet tube is clogging as less effluent is coming out. This happened before when I was away on a business trip. I then triggered a fellow reefer to my place to unclog the calcium reactor. In the meantime, the Alkatronic was dosing alkalinity solution till help arrived. KH decreases gradually over the week. This could either be the dosing is slowing down gradually (measure it). Or a sign that the corals are consuming more Unable to hold KH levels. Bigger than usual swings from day to day. This is a tell tale sign of low salinity. I usually get this if salinity drops to about 1.023 - 1.024SG (instead of 1.026 / 35ppt) KH increases gradually over the week. There could be 2 reasons More is being dosed. Check calcium reactor effluent rate or dosing pump accuracy Corals not growing / consuming (more likely case). When this happens, its usually some water parameter is out of balance. Usually I'll detect that potassium is very low (eg. 350ppm instead of target 400ppm) or Magnesium (1260ppm instead of target 1400ppm). I've also noticed that dosing trace elements increase consumption slightly. KH increases beyond 13dKH. This is usually a hardware fault. The maximum that Alkatronic can read is 13dKH and give a Code3 error. The unit determines the kH level based on the amount of reagent added. Higher alkalinity if more reagent is added. However if the reagent nozzle is clogged, no reagent is dispensed into the beaker, but the unit is still counting the volume. Check the pink nozzle. Unclog it. In my case, I snipped a bigger hole and recalibrated the pump. The issue didn't come back again. Reagent tubes leaking. The only tube that has a higher chance of leaking is the 1.6mm one for the reagent. It stretches over a acrylic tube. Especially if you tug & pull it, it can develop micro holes or cracks over time. As a preventive step, I snip off the ends ever 6 months or so. This is what it looks like after 3 years of use. The internal peristaltic pump tubes and the 1.6mm reagent hoses have been changed once around the 2.5yr mark. You can see from the color of the hoses. The pH probe is still the original set. Its calibrated once every 6-9 months. I've changed the hoses once so far. They weren't leaking or anything but just a preventive move. 2 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted April 18, 2021 Author SRC Supporter Share Posted April 18, 2021 Picked up a frag from fellow reefer recently. All the best on your future plans. Here it is in my tank. Hope I can maintain the lovely colors. Some other pics taken yesterday. Most with yellow filter. Bali shortcake (From Coral Fanatics SG) Divaricata (From Coral Fanatics SG) Space Invaders Pectinia (From Coral Fanatics SG) Horrida (From Reefing Reality) From reefer (originally from S5) Love the colors of this branching hammer (From Coral Fanatics SG) Holy Grail torch Fiji pink birdsnest 4 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Member Law88 Posted April 18, 2021 SRC Member Share Posted April 18, 2021 Awesome!! Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member R0B Posted April 18, 2021 SRC Member Share Posted April 18, 2021 Awesome!! Sent from Singapore Reef Club mobile appI second that hahaha. Have you ever thought of doing a live stream q&a ? Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted April 21, 2021 Author SRC Supporter Share Posted April 21, 2021 On 4/18/2021 at 10:39 AM, R0B said: I second that hahaha. Have you ever thought of doing a live stream q&a ? Sent from Singapore Reef Club mobile app Ha...did a short one during the last SRC Visits event on 21st March. Can always do another one if there is enough interest. But I think there are more interesting folks to chat with Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted April 21, 2021 Author SRC Supporter Share Posted April 21, 2021 Received some queries what I feed my tank, how if it affects nitrate levels, and my opinion on Reed Roids. I feed minced fish/prawn meat & pellet food to the fishes daily. And Reef Roids to the corals about 3 times a week. Specific for Roids Roids, it’s a very good zooplankton based food for SPS, LPS and filter feeders. Broadcast feed is perfectly fine. In my case, both the return pumps & wavemakers go into feed mode, so the bits float around the display tank longer and be captured by the coral polyps. Mix with a bit of tank water to make it relatively thick. But most of the time, I’ll turn off the return pump and wavemakers then target feed the corals. And enjoy the sight of the corals’ feeding response. After 15-20min, turn on the wavemakers to allow the food to circulate in the display tank. After a further 10min, turn the return pumps back on. No big issues with nutrients. A quick check last week showed its 6.3ppm, which is alright. Gonios love it. While some can get away with not feeding SPS corals, I find they fare much better with feeding. Also, polyps will extend more regularly, especially for millipora. It’s interesting to see how some LPS respond to fine food - they secrete a mucous layer to capture the reef roids then suck in through their mouth . A quick video : 1 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted April 24, 2021 Author SRC Supporter Share Posted April 24, 2021 Interestingly, the earlier post on brown jelly & ciliates was picked up by Reef Builders. https://reefbuilders.com/2021/04/21/reef-primer-demonstrated-to-effectively-treat-brown-jelly-ciliates/ Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Member Maipian80 Posted April 24, 2021 SRC Member Share Posted April 24, 2021 Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted April 24, 2021 Author SRC Supporter Share Posted April 24, 2021 I have this particular pink birdsnest frag that has stubborn bubble algae that keeps coming back despite best effort to scrape off the bubble algae (out of tank). While we know that zoanthids in general are tolerant of diluted hydrogen peroxide dips, the general belief is never to let Hydrogen Peroxide (H2O2) touch SPS. As a last resort, I dipped it in about 0.3% H2O2 for about 1-2 minute after manually removing as much bubble algae as possible. You can see the frag bubbling away. That frag was dipped on 4th April. Its alive & growing well today Some will take the safer route of using Vibrant. But if you have just an isolated case & want to use H2O2, its at your own risk. Best to 'test' with a small frag ahead of time. Below is the dilution recipe for 3% H2O2 to 0.3%. Add 10ml of H202 (3%) to 90ml of RODI water (to make a final volume of 100ml). 1 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
wspiritz Posted May 10, 2021 Share Posted May 10, 2021 Love this thread. It's very informative. So much to learn Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted May 15, 2021 Author SRC Supporter Share Posted May 15, 2021 Faced some Alkatronic issues the past few days. Sharing how to self debug & resolve. From the chart, it shows the reagent pump (C) is sensing that it is dosing a lot of reagent (hence the high KH). Two possibilities - the pink nozzle tip of the reagent is clogged. Or there is air in the reagent tube (and hence dosing less liquid that it really should be) A quick visual check confirms there is air bubbles in the reagent line after the peristaltic pump. No no air bubbles coming from the reagent container. Did a quick pump C prime to try to pinpoint the source of the hole. Found a pinhole at the fitting joint. Snipped the end off. Primed the hose & its its all resolved. Alkatronic has been running since Feb 2018. Hoses get worn out over time. Either change it as part of preventive maintenance or have some on standby just in case. 1 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted May 17, 2021 Author SRC Supporter Share Posted May 17, 2021 Abalone feasting away at the algae before the glass & wavemakers are cleaned. In an attempt to spread out the max mini carpet anemone, I pried one off the mother colony area. Placed it in a ricodea saver container with mesh top (https://reefmarketsg.com.sg/product/aquaticexclusive-ric-saver-cover/) Let it really sink its foot onto the rock for 1-2 weeks before taking it out of the container. Quick video from today. 2 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Member Mr. Tay Posted May 24, 2021 SRC Member Share Posted May 24, 2021 Wow, very nice DT ! 1 Quote ............................................................................................................................................ Feel free to visit my Aquarium blog @ http://taysaquarium.blogspot.sg/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted May 26, 2021 Author SRC Supporter Share Posted May 26, 2021 A video update this time round of topping up my DIY kalk stirrer. This was made from an old Skimz skimmate collection container that Larry passed to me some time back. Stirrer is using a magnetic stir bar & old PC fan underneath. Details of the build is in earlier posts in this thread. Kalk is dosed 24/7 but at a much higher rate at night than during day time using a Versa peristaltic pump. All ATO water passes through the kalk reactor - primary reason is to boost pH. Here is a video of the top up process. Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
Ody Posted May 27, 2021 Share Posted May 27, 2021 Very nice tank!! And informative!! Nice!! 1 Quote Link to comment Share on other sites More sharing options...
Darren Sim Posted May 27, 2021 Share Posted May 27, 2021 A video update this time round of topping up my DIY kalk stirrer. This was made from an old Skimz skimmate collection container that Larry passed to me some time back. Stirrer is using a magnetic stir bar & old PC fan underneath. Details of the build is in earlier posts in this thread. Kalk is dosed 24/7 but at a much higher rate at night than during day time using a Versa peristaltic pump. All ATO water passes through the kalk reactor - primary reason is to boost pH. Here is a video of the top up process. Nicely done! Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted May 31, 2021 Author SRC Supporter Share Posted May 31, 2021 Some random pics from the past few days. Male blue eye anthias and his harem of 3 females. The anthias' fav spot - within the branches of the bali slimer Tuxedo urchin on the glass Tunicates shedding its slime coat Harvesting hair algae grown on a mesh Grown in this 'refugium box' that's straddling over the sump. Lit by AI Prime Fuge Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted June 7, 2021 Author SRC Supporter Share Posted June 7, 2021 One week after harvest, the hair algae in the refugium is growing back with a vengeance. Light schedule for the AI Prime Fuge. About 6.5hours light off during the day time. Did some parameter checks over the weekend. Magnesium was found to be 1260, so I manually mixed some Magnesium & dripped in. Increment 100ppm in 1 day Potassium was surprisingly low at 320ppm, so similarly, I'm now raising it at incremental 20ppm per day. Target to reach 400ppm by Tuesday. Salinity was also found to be a little low -> 34ppt. So i mixed some super saturated mixture in a small tub to drip in. Do this a couple of times until 35ppt is reached. Found some media in a old CR secondary chamber reactor. Used that to top up the calcium reactor. In the meantime, I've ordered some new media from ReefmarketSG. Changed out the CO2 tank at the same time as the tank pressure started to drop from 1000psi to about 600psi. The last tank lasted 5.5 months. And as you can see, I label everything. Just in case I forget that the tank is empty & forget to bring it for top up. Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted June 14, 2021 Author SRC Supporter Share Posted June 14, 2021 Some mobile phone pics. Tops down view. Love these lights. The basket across the middle brace is useful for clipping on a basket. That space is used for keeping max mini carpet anemone or any loose frags temporarily. White light view Water change over the weekend. Some out of the water photos. No issues out of water for 30min. If beyond that, i'll just splash some water on it. Holy grail out of water. Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted June 20, 2021 Author SRC Supporter Share Posted June 20, 2021 Yellow filter photos. Some love it. Some hate it. It provides a better representation of colors of certain corals we see under blue light that is typically not possible to photograph. At times it over exaggerates the fluorescent colors of LPS. Coral fluorescence is determined by the glow (or scientifically called "expression") of green fluorescent like proteins (GFPs). Even though the name says Green Florescent Proteins, they come in various colors - from cyan to red & yellow. Quick google research suggests that fluorescent proteins (FPs) are reported to play an important role as photo-protectants and antioxidants in corals subjected to stressful temperature conditions. That is, to act as a screen to protect the algal symbionts (zooxanthellae). GFPs have peak emissions around the 485nm range. OK....anything more is beyond my level of understanding. Let's just enjoy some pictures instead. White light (no yellow filter) vs Blue light (with yellow filter) comparison. No color enhancement via photoshop. Other pics with yellow filter (no photoshop) Miyagi Tort (frag previously from Mike Stone) Frag previously from Vik Hosting this pectinia for a friend 2 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted June 20, 2021 Author SRC Supporter Share Posted June 20, 2021 Got a nice Aussie blue stag from Reefing Reality. Don't see stags in shipments very often. Hope I'm able to hold the colors Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted June 22, 2021 Author SRC Supporter Share Posted June 22, 2021 iPhone pic of the Bugatti Chalice. June 2021. Just realized that the mouths look much larger now compared to a year ago. It grew about 1.5cm radially but has since been trimmed. June 2020 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
SRC Member Shyn Posted July 1, 2021 SRC Member Share Posted July 1, 2021 Thanks for sharing! Quote Link to comment Share on other sites More sharing options...
SRC Supporter SubzeroLT Posted July 3, 2021 Author SRC Supporter Share Posted July 3, 2021 Got some emerald crabs from Coral Farm recently. In the past, I tried to get a mix of male & female in an effort for them to breed in the tank. That never happened. In any case, this is a male. Restocked on salt It appears I'm one of the very few reefers who remix the salt to ensure they are homogeneously mixed. This is to ensure maximum consistency of the entire bucket. Regardless whether its synthetic or evaporated salt, not all particles will be of the same size. And there is a natural tendency for large particles to be at the top. And small particles settling at the bottom of the bucket during transit vibration. This is fundamental physics - something called granular convection ( Wiki : https://en.wikipedia.org/wiki/Granular_convection) 1 Quote Facebook : https://www.facebook.com/mysliceofnature/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.