Jump to content

Recommended Posts

  • 1 month later...

What is the water level at the skimmer chamber in the sump?

Sent from my HMA-L29 using Tapatalk

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to post
Share on other sites

What is the water level at the skimmer chamber in the sump?

Sent from my HMA-L29 using Tapatalk

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to post
Share on other sites

What is the water level at the skimmer chamber in the sump?

Sent from my HMA-L29 using Tapatalk

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to post
Share on other sites

Which skimmer are u running in your sump?

Sent from my HMA-L29 using Tapatalk

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to post
Share on other sites
Nice skimmer! Whats your nutrient export going to be?

thanks! hopefully, the skimmer can remove before it started to decompose.

the skimmer is rated about 5 times my tank volume.

 

So far so good, new tank syndrome is here, so waiting for bacteria to fully built up, will be added more bio media soon like that maxspect. Currently, only have the Brightwell NO3 cubes.

Moved my corals and fish to the new tank already.

Need to upgrade to better test kits, NH4/NO2/NO3/PO4 undetectable.

Will slowly maintain the rest

pH8.2

dkh 7.8 (need to slowly increase to at least 9.)

341c44bf5d292506e2ecadf9b715bec7.jpg

Link to post
Share on other sites
  • 1 month later...

U need more corals and fishes definitely. Lol

  • Like 1

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Inled R80 x 3 with 2  x Illumagic Vitamini Super Actinic LED Striplight Bars.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao SOW-16M, SLW-30M & SLW-20M  Sine Wave Pump.

Water Top Up: Reef Octopus ATO.

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Similar Content

    • By Raheel
      Hi, thank you for taking the time to read through. 
      Whats the Atlantis, Atlantis is what i named my Red Sea Reefer 350. Why name it Atlantis ? Atlantis has always fascinated me. And The Red Sea Reefer being my current dream tank build, the only thing i could think of naming is was The Atlantis. 
      I bought my Reefer 350 second hand from a fellow reefer. The tank was only used for a few months, 5 months to be exact. Well the tank was collected today. And i did the delivery myself. So i guess ill start this thread by writing my experience on how the delivery was done, and what you guys could learn from my mistakes. 
      My friend and i, yes 2 people. We went down to collect the tank, in my van.  Lesson no 1, have more help. Despite the tank weighing 64kg, we had issues carrying it. issues faced was lifting the tank up higher due to the piping, instead of sliding it off the cabinet. Second issue faced was loading it into the van. It was an issue because again of the piping we could not slide it in and had to carefully place it.  Now my van isnt that big. Its just enough to fit a 4 ft tank.  Second issue faced, i decided i did not want to dismantle the cabinet and that we just put it in the van standing. Well it did fit, but due to the size of my van, it was just nice about 5-6 cm away from the door closing in. And the sump tank was just kissing the cabinet. 
      In my opinion, get more people to help. Also have some boxes or cloths to protect the tanks, because when i was driving, there were instances i had to brake hard, and in one of those breaks the sump slide forward and hit the tank. Luckily nothing happened, we stopped over at the patrol pump, got everything placed properly again and put cardboards between them just incase 
      Once the tank was home, it was a breeze to set up. Firstly the previous reefer had already set up the overflow pipes for me. All i had to do was fix the drainage, emergency drainage and return. 
      Now the tank sits, while its Rocks, salts, sands and biomedia come. Also going to do a leak test before filling it up with salt water. 
       

    • By Red Sea Support
      Dear Red Sea Reefer,

      Red Sea is working around the clock to continuously develop and improve our products, and we’re happy to announce the latest round of improvements to most of our REEFER™ models.
       
      While you won’t notice any changes to the overall external appearance of our REEFER™ tanks, you’ll find some significant improvements within the system itself.
       
      These include:
      Refugium-ready sumps. Downflow valve now positioned at the front of the cabinet. Adjustable height skimmer chamber. Increased volume for RO reservoir. New filter cup, supplied in addition to a micron filter bag (both items also available as accessories for all REEFER models). Marine Spec plywood cabinet with leveling feet for models XL425 and XL525 (previously available only for the XXL & Peninsula series). The REEFER™ 170 model remains unchanged due to cabinet space limitations. 
      For more details about specific REEFER™ models, visit us at https://www.redseafish.com/aquarium-systems/reefer/
       
      We hope you enjoy these upgrades to Red Sea’s best-selling reef systems!
      Check out our new and improved REEFER models
       
      Happy Reefkeeping,
      The Red Sea Team
      Join the Red Sea Owners Community
       
  • Topics

  • Latest Update

    1. 0

      Wts flipper magnet float and vibrant

    2. 0

      Flipper Pico Algae Magnet Cleaner

    3. 0

      WTS: Custom Made Sturdy Acrylic Tank Extension

    4. 3

      How to get Chaeto to tumble

    5. 16

      FrankenTank

×
×
  • Create New...