Jump to content

Decom Custom Tank & Cabinet 3 x 2.5 x 1.8


Recommended Posts

All good things come to an end.

Decommission my tank for larger things in life. A custom 3 x 2.5 x 1.8 Peninsula tank is looking for a new owner.

Tank.jpg.7a992b6c031420f9bdcea504ceb0ccbf.jpg

Tank is beautifully done by CRA. (Took me 4 months to plan and sketch)

Specs are as follow

-Tank: 3ft(L) x 2.5 ft(W) by 1.8ft(H)

-Cabinet: 3.5(L) x 2.5ft(W) by 3.3ft(H)

-Glass: 12mm - 3 Side Crystal Glass

- Overflow: Shadow Overflow Box

20190503_134304.jpg.82cfe27b9b322dfa15f18ceb96640ebe.jpg20190503_134310.jpg.9154bc76da47b22778e5e302144a495b.jpg20190503_134357.jpg.337466f6b980f0f22888e6c143dd5e6e.jpg

 

CABINET & SUMP

The beauty of this tank is that it is designed to fit oversize equipment in a smaller sump.

First partition allows you to place a Clarisea SK5000/ Filter Sock Holder. 1st partition underflows to the media compartment to house your bacteria media.

The second partition is able to contain big equipment such as NYOS 160 and a CM152 CR which i am currently using.

Last compartment is the return section, I have it measured to fit a large Vectra M1 and you can also fit a NYOS Torq or equivalent beside the return pump

 Half of the cabinet is placed to house a TECO TK-2000 Chiller with custom cut exhaust hole which fit perfectly. 

The top of the cabinet consist of two dry side one for the Glass display for your controllers, and another to house your power plugs and conceal your wires.

20190731_011212.jpg.5b252339ff443032f7ea12828e140d32.jpg

 

The only flaw of this tank are the rusty inevitable rusty hinges, and 2 short and slight scratches on the right glass panel (boo-boo when i tried to move my frag rank for glass cleaning).

I have paid close to $2.6K on the custom tank setup. Looking at letting go at $688 or best offer. 

Viewing can be arranged for interested buyers and I'm located at Choa Chu Kang.

I will require time to decom, reckon it will be ready roughly by late Jan/Feb.

 

20190720_143320.jpg

20200928_213459.jpg

  • Like 1
Link to post
Share on other sites

Apologies if i did not manage to return ur PM.

I am not selling my equipment for the time being as I need to settle a buyer for the tank and cabinet first; please dont pm or repeatedly text me about letting go my equipment for the time being.

For those who are interested to purchase as a set can leave me a text and we can arrange a time to view the tank and we discuss from there; i'll list out the equipment via text if you wanna purchase as a bundle.

 

cheers :ThanxSmiley:

 

Link to post
Share on other sites


×
×
  • Create New...