Sponsor Geo Aquatic Posted October 12, 2008 Sponsor Share Posted October 12, 2008 Hi Vfong, no worries about your corals as it is still at my customer's place. He is overseas in China coming back soon. No keys cannot take the corals. Sorry for not being able to reply you but got personal stuffs to settle. All in all, its my mistake on my side & I apologise to you sincerely. Pls email or pm me to arrrange for details. My hp having some problems too. Philip Quote Link to comment Share on other sites More sharing options...
Sponsor Geo Aquatic Posted October 12, 2008 Sponsor Share Posted October 12, 2008 Hi Stanley, I think I have communicated enough with you. I do not make that cut you mention. My carpenter arrange his friend down to tear down the tank, I was quoted much higher than $400 by my carpenter. Before doing the job, I have asked you a few times & given you the costing as I am not sure about the market rate. I stated to you that I had never provide such service before. In your case, I am playing a middle man. I do not know the actual pricing after the guy reveal to me on the day of work too. Philip Quote Link to comment Share on other sites More sharing options...
Sponsor Geo Aquatic Posted October 12, 2008 Sponsor Share Posted October 12, 2008 Need to clarify that I do not selected customers. I did not reply as I could not take on the job. As I have limited manpower, I can only service a certain number of customers at 1 time. That might be the reason why some felt that I am being selective. I will not turn down any business opportunities if its within my means. In business, one will surely experience problems. I might not be able to handle it properly this round but I will surely learn from my mistakes. Pls email to phil@geo-aquatic.com for any feedbacks or enquiries. I will take all the feedbacks & surely make neccessary improvements on my side. Philip Quote Link to comment Share on other sites More sharing options...
Solo77 Posted October 13, 2008 Share Posted October 13, 2008 Thanks for all the clarifications. To improve in your customer service, i think you mentioned that you did not reply because you could note take on the job. I think this can definitely be improved by replying that your hands are tied and turn down the business. By not replying, i think it is rather ......... Certainly hope you can live up to your past reputation and provide good customer services. May your business prospers. Good Day to all. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
Sponsor Geo Aquatic Posted October 13, 2008 Sponsor Share Posted October 13, 2008 Hi Solo77, Thanks for the the encouragement and advise. Greatly appreciated! Philip Thanks for all the clarifications. To improve in your customer service, i think you mentioned that you did not reply because you could note take on the job. I think this can definitely be improved by replying that your hands are tied and turn down the business. By not replying, i think it is rather ......... Certainly hope you can live up to your past reputation and provide good customer services. May your business prospers. Good Day to all. Quote Link to comment Share on other sites More sharing options...
Sponsor dr evil Posted October 13, 2008 Sponsor Share Posted October 13, 2008 Hi Solo77, Thanks for the the encouragement and advise. Greatly appreciated! Philip hi bro Philip, Hope u did not forget about me.... still waiting Quote Link to comment Share on other sites More sharing options...
seahwl Posted October 13, 2008 Share Posted October 13, 2008 Last yr,My friend pm and sms him but it took him a long long...... long time to reply. End up my friend got another tankmaker.. Now someone mentioned it here.. I am not suprised. One bitten twice shy.. Anyway I hope he can improve his service better... Quote Link to comment Share on other sites More sharing options...
Solo77 Posted October 13, 2008 Share Posted October 13, 2008 Think damages will be there, though clarification has been made but judgement will only be made by individual. Certainly hope improvement can be made as there arent many good tank makers alot. Nevertheless, ppl should be given a chance to improve. Certainly hope he can improve his service and shine again with ppl claiming to be GA tank club..... : ) Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
seahwl Posted October 13, 2008 Share Posted October 13, 2008 Think damages will be there, though clarification has been made but judgement will only be made by individual. Certainly hope improvement can be made as there arent many good tank makers alot. Nevertheless, ppl should be given a chance to improve. Certainly hope he can improve his service and shine again with ppl claiming to be GA tank club..... : ) What he lost is a potential customer.. There is alot of good and reliable tankmakers if you make an effort to search So young chap pls buck up your service.. All the best in your business.. Quote Link to comment Share on other sites More sharing options...
Vfong Posted October 13, 2008 Author Share Posted October 13, 2008 Hi Solo77, Thanks for the the encouragement and advise. Greatly appreciated! Philip Hi Mr Goh, U appear again, as i did answered some pm to some who messaged me. I told them that u are not out to con, but very bad habit to keep your customer in suspends, just disappear and appear as u like. People pay to have a tank set up, not for live suspense movie. Everything i posted are all i experience nothing added. So how u make up with your repution is up to u. Quote Link to comment Share on other sites More sharing options...
Sponsor henry@ml Posted October 13, 2008 Sponsor Share Posted October 13, 2008 hi bro Philip, Hope u did not forget about me.... still waiting Hi Bro Philip, me too . . . . I'm also in the queue. Quote Join us on Facebook! henry'sreefgourmet - your fish, corals and critters will love it! Goodbye!PO4 - your simple, highly effective and low cost method to phosphate control354 Clementi Avenue 2#01-203Singapore 120354Tel : 6777 4047Mobile : 9843 6032Operating Hours:Mondays : 3pm - 8pmTues - Sat : 12.30pm - 8pmSundays : ClosedClosed on the following Public Holidays : New Year, CNY, Labour Day, National Day & Christmas Link to comment Share on other sites More sharing options...
Jameshong Posted October 14, 2008 Share Posted October 14, 2008 Hi Bro Philip, me too . . . . I'm also in the queue. Wow....so many ppl waiting. It must be v long queue liao ! Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
Solo77 Posted October 14, 2008 Share Posted October 14, 2008 Trust and faith takes years to build up but just second to destroy everything. Nevertheless, one should be given another chance. Not easy but true sincerity and effort will be paid off one day. Just a matter of time and patience. : ) Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
SRC Member uLtRaMaN Posted October 14, 2008 SRC Member Share Posted October 14, 2008 Trust is just like a mirror, once broken can never be repaired or fixed. Quote Link to comment Share on other sites More sharing options...
Solo77 Posted October 14, 2008 Share Posted October 14, 2008 Maybe magician can do the job....lol Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
SRC Supporter ReDDeviLs Posted October 14, 2008 SRC Supporter Share Posted October 14, 2008 hope things will improve for both tank maker, and customer.. imagine u plan all well and get delayed.. super sian!!!!!!!!!!! and stuck! Lol! Quote [ ] [ ] Reef Reefing Reefed Link to comment Share on other sites More sharing options...
Jameshong Posted October 14, 2008 Share Posted October 14, 2008 hope things will improve for both tank maker, and customer..imagine u plan all well and get delayed.. super sian!!!!!!!!!!! and stuck! Lol! IMO, sign contract to safe guard for both party ....! Full refund with 10% penalty, if tank maker delay or unable to fullfill the initial stated/required day of delivery lor . Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
SRC Member Reefaholic Posted October 14, 2008 SRC Member Share Posted October 14, 2008 Hi Stanley, I think I have communicated enough with you. I do not make that cut you mention. My carpenter arrange his friend down to tear down the tank, I was quoted much higher than $400 by my carpenter. Before doing the job, I have asked you a few times & given you the costing as I am not sure about the market rate. I stated to you that I had never provide such service before. In your case, I am playing a middle man. I do not know the actual pricing after the guy reveal to me on the day of work too. Philip Enough? Hey now is Oct rite? i hope you did not forget your promise whom i think u used to break always. Before doing the job, i said you need to cut the glass and thinking that the job is difficult so we agreed, but then the method of doing the job is different hence the price too. Now you saying you playing middle man, yes i agreed and i expect you to make some not cut throat price and different method of doing the job. Not to mention i known you for years and introduced you some of my friends. I dont make a single cent and now feel so apologetic whenever i talk to them. Oct already, i still waiting.. You act blur or what? To be frank, that few hundreds meant nothing to me. But i just dont like being betrayed by a so called friend who i first think is trustworthy person but turn out to be someone else. Quote Link to comment Share on other sites More sharing options...
SRC Member Reefaholic Posted October 14, 2008 SRC Member Share Posted October 14, 2008 In fact there are alot more out there who did not make any posts here and i think you own them an answer. You are lucky as they are quite easy to go with. But i think dont take people kindness for granted. The market is small. Quote Link to comment Share on other sites More sharing options...
seahwl Posted October 14, 2008 Share Posted October 14, 2008 In fact there are alot more out there who did not make any posts here and i think you own them an answer. You are lucky as they are quite easy to go with. But i think dont take people kindness for granted. The market is small. Yup. I agreed with stanley..One of it is my friend, he did not make any post as he currently oversea. It seem that a lot of ppls still in the queue... ...like marinelife henry etc.. Quote Link to comment Share on other sites More sharing options...
RockyBoy Posted October 15, 2008 Share Posted October 15, 2008 phew... luckily I've selected another tank-maker... if not, I'm still in the never-ending wait list... Quote Member of : UEN: T08SS0098FMASS in Facebook Reefing in LED Link to comment Share on other sites More sharing options...
SRC Member Vlamingi_cont Posted October 15, 2008 SRC Member Share Posted October 15, 2008 This was the case that happen to me. From jul where i agree to let the person to take my tank with all term agreed 50% deposited, till this week..............until final is final. This person is so bad that promissed after promissed he didn't delivery. I cancel the agreement and lost some money. I am now looking for tank plus cabinet maker. care to share anyone reliable? AM!!! Quote 1ft cube with IOS [the low tech tank] 1. JBJ C-breeze to keep temp hovering around 27-28'C 2. LED clip on - 120 bulbs -skimmer-less- My 3 humble equipments that keeps my tank running... [DRIED OUT] 1. The RSM itself of course 2.My NEW Deltec MCE-300 Skimmer 3. My trusty Arctica Chiller Tank parameters: Temperature maintained at 25.3'C to 24.7'C No3: 10ppm(b4 the use of the deltec skimmer) No3: 5ppm (after use of the skimmer) Others? too lazy to measure...LOL Camera- EOS 50D Link to comment Share on other sites More sharing options...
Solo77 Posted October 15, 2008 Share Posted October 15, 2008 do check around....some reputable shops that provide tank making services also have unhappy customers and bad experience encountered. Just need to do some research. Some snr reefers here already have the experience...after knowing....got to be careful also. : ) Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
yooyoo99 Posted October 15, 2008 Share Posted October 15, 2008 I hv setup a 6 footer in Dec07, think i paid a slightly higher price premium as compared to other tank maker, but still settle on him due to the good reviews of the tank maker in this forum. No doubt, his tank quality is good, i hv full confidence in the work. But the carpentry sucks, and not not up to my specs. Sides of the sump area not removable making it difficult for me to do maintenance now. But he did not offer to rectify, blame it on the carpenter instead. Recently, the joints in the GF pipings start to leak 1 by 1. I hv to take them apart and tighten them using the white teflon tape (some part no tape there). This is giving a phobia, as i wonder when will the pipings which i hv not touch will start to leak. Also encountered slow response when calling during the tank setup phase, numerous excuses for delays in tank setup etc etc. Overall satisfaction for the $$ spend, not worth it. But then again, full confidence in the glass works. Above are my personal views when i setup my tank, not to sabotage anyone's business. Quote Link to comment Share on other sites More sharing options...
SRC Supporter ReDDeviLs Posted October 15, 2008 SRC Supporter Share Posted October 15, 2008 do check around....some reputable shops that provide tank making services also have unhappy customers and bad experience encountered. Just need to do some research. Some snr reefers here already have the experience...after knowing....got to be careful also. : ) yeah there is 1 reputated lfs.. did something.. might be erupting soon too! Quote [ ] [ ] Reef Reefing Reefed Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.