Jump to content

Project R.E.


andylee
 Share

Recommended Posts

  • SRC Member

Hey guys, I'm back into reefing after a 2 years break.

Now fully got my gf's support after a trip to Tioman so can spend more time on this hobby again :lol:

Most of my equipments here are acquired from bros in this forum, so can say it's a 2nd hand setup.

For list of my equipments please refer to my signature.

Tank was cycled since early August in my previous 3ft tank, upgraded to this 4 footer on 18th Sep.

IMG_0563.JPG

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Shall list down my tank specs here, in case i change my signature.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29.5 °C)

Wavemaker: Seio M620

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Left side:

IMG_0479.JPG

Right side:

IMG_0480.JPG

Feel free to post ur comments :thanks:

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Purpose of posting my setup here is to gain invaluable comments on how to improve my aqaurium

For my lightings, I'm using a 4ft 2x T5 HO retrofit from AM, and a 3ft 3x T5 HO Hopar set (one bulb spoilt). Will it be enough?

Chiller set to kick in at 29.5 and stop at 28. Good enough for LPS only tank?

Tank circulation is using Rio 20 (5400 l/hr) as return pump. after tee off to chiller and loss, circulation about 4000 l/hr. About 13x.

Still looking for wavemakers also.

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Frogspawn and hammers. Does the hammer branch on the right looks bleached?

Realised it's so pale in colour after i added the 4ft retrofit lights. Can't remember at first before upgrade lights is it like that.

IMG_0536.JPG

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Ugly.. still working on how to beautify the right side and the lightings area.

Had to leave the skimmer out of sump cos cabinet too low

IMG_0549.JPG

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

ok, lower lights it shall go to. but flow? high or medium? cos current position not waving much. frogspawn need to adjust?

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Got questions about requirements of some corals.

Gonio, bubbles, hammers, frogspawn

High/medium/low flow?

Strong/medium/low lighting?

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • Senior Reefer
Got questions about requirements of some corals.

Gonio, bubbles, hammers, frogspawn

High/medium/low flow?

Strong/medium/low lighting?

gonios are extremely difficult to keep. i won't suggest keeping them

bubble corals are easy. medium light, low flow.

hammers and frogspawn, like all euphyllias, like moderate flow and medium to good lights.

Link to comment
Share on other sites

  • SRC Member

Thanks bro. See what i can do when i get back.

My bubbles in quite a nice cervice to fit it in, see whether i can adjust the flow there.

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

for the 4ft lights, I'm using ATI tubes. one blueplus and one aquablue special.

for the 3ft lights, i'm using Hopar 2 white 1 blue.

for these pics i used camera phone cos now camera not around with me.

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

Yr tank height is abt 1.5ft and 4 T5 tubes for LPS may be a bit too strong.

Probably change one of them to actinic blue or pro-colour which is mainly red.

I used to have one of these anemone...be careful..as this particular type likes to move around and may sting yr other corals.

l7304smr.jpg
Link to comment
Share on other sites

  • SRC Member

my tank height 2ft. read that alot of bros here use at least 4 tubes or even 6 tubes?

the anemones so far so good. not moving much. have 3 of them actually. :lol:

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member
Nice to see you coming back to the hobby... :)

thanks boss. will be monitoring ur tank thread closely for inspiration :)

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...