five

I have a tank set with custom made cabinet n tank top for sale. Tankset include all equipments such as chiller, T5 lightset, filter, co2 cannister etc. Ok, list of items on sale: 1 ) Tankset 2.5 by 2 by 1.5 ft (H) 10mm glass euro bracing. 2) Cabinet is a solid teak wood custom made. Front and back is empty. The front cover is a 5mm thick black colour acrylic sheet. The cabinet depth is about 1.5ft, so its about 6" shorter at the back. But no stability issue as have been used for quite a few years this way. 3) Cabinet top is custom made wood strips resting on the tank top acting as cover. Unique design. 4) CO2 cylinder include a general Nature type cylinder and a US Catalina cannister. It comes with a Dupla dual guage valve and solenoid. 5) Chiller is a Artica 1/10 hp. The thermostat have some problems about 1 year back. But it was fully repaired by System Control and Engineering located at Boon Keng at about $260. Now working perfectly fine. 6) Other miscel items include canniter filter (unsual of brand), T5 dual tube lightset, and others. Selling the whole set for $600. The tank set is about 3-4 years. Interested parties pls pm me for discussion.

I have tested the probes with the American Pinpoint ORP solution (400Mv) and both works as per norm. Let's look at the controller with blue face sticker (1st picture, bigger controller). The probes gives the reading of the ORP solution as 391, which is +/- 9. So it works. I have set the ORP setting at 400Mv. Thus if the detected value by the probes is below 400Mv, the controller will activate the ozonizer. So in this case, the probes indicated the ORP readings as 391, and thus it is suppose to activate the ozonizer, which it did. Look at the Sander Ozonizer, it lighted up (yellow LED in middle), indicated it's activated. This picture alone shows that the probes and the controller as well as the Sander Ozonizer are working fine. Let's look at the controller with the grey face sticker(2nd picture). The readings of the ORP solution given by the probe is 397, which is pretty accurate. As this reading is below the set ORP (400Mv), it activated the ozonizer as well. The top right hand red light on the controller indicates it was activated. Just to prove that both are working fine before a sale. Let me know your interest.

Guys, I hv 2 sets of Aquamedic ORP controller which I have all along used in my freshwater setup, for sale. Quite a few yrs old, maybe 4-5 yrs. They are still in good condition. one set comes with Sanders C50 ozonizer. Have recently thought of letting them go as I dont really need them anymore. Anyone needs it, please qoute me a price. No obligation. If its reasonable, then its a deal. PM me. I can watsapp the pictures as I have yet to figure out how to attach pictures from my hp.

Ok guys, I have sold off most of my stuff. Please allow me to repost on the sale of my Fluval G6 cannister filter. As you can see, I have cleaned it up. The mechanical filter cartridge looks almost as good as new, so are the filter media, which are a mix of Eheim substrate pro and Fluval original media that comes with the filter. The filter is in great condition. I would say it operates close to super silent. I dare to say this is the best filter I have used so far. Im selling this great filter at a price $250. If you had intention to get your hands on this, please do not hesitate to drop me a pm. Its all wrapped up and ready to go.

Hey guys, I'm so sorry. Not sure what's on my mid. I do nit need a wave maker. As such, not trading for any wave maker. Please ignore my last message.

Anyway, just for information. I am most willing to trade the filter for a good working condition mp40 vortech wave maker.

Ok guys, tank set sold. Appreciate moderator could assist in closing this thread. I will start a new thread on the sale of the filter and Pleco caves. I suppose this is neater this way. Thanks a lot.

I have sold off the fishes and the driftwood shown in the pictures. I'm left with the tank and Fluval G6 filter. The size of the tank is (4.5 by 2 by 1feet (h) and it comes with a solid teak wood cabinet. The height of the cabinet is about 1.5feet. I am selling the tank set for $150 and the Fluval filter for $250. If you are able to get both togather, the price will be $300. This tank is used for fresh water fish.

Have a Eheim Compact3000 pump for sale at $100. its less than a year old. inyetested parties, pls pm me. collection at Punggol.

anyone?

anyone?

Im looking to buy a Vortech MP40 wavemaker. I hope I can trade for 1 with my Fluval G6 cannister filter. anyone interested in a deal, pls drop me a message. Thanks. Carl

Hey, thanks for the advice. I just got a adaptor, which the head looks the same. But somehow, it can't be plugged into the battery backup input. Probably I will bring the whole backup to the shop tomorrow. Hopefully I can find a replacement.

Hi guys, I have a Vortech battery backup which suddenly fail to work. I did a check and realized the green light at the adaptor did not light up. Usually it's always lighted up. Is the failure due to the adaptor blown? Though the light did not light up, it feels warm when I touched it. I off the main power supply to the Vortech wave maker. By right, the battery backup should still be supplying power to the wave maker. But it doesn't. Anyone kind enough to analyze for me what's the problem? Is it the adaptor or that the back up unit is down? I got it about a year ago fr a farm..Kelvin or so...didn't manage to retrieve his contact fr anywhere.

Anyone selling? MP20 or 40 Also can. I have a eheim2080 for trade if you are interested.

Looking for a good condition vortech mp10. Anyone letting go?

Still for sale or trade!

Still for sale or trade

Upz upz

Upz for the sale

Hi, any idea whats the size of the white tray?

Upz for this sale. Btw, I also have a good condition eheim2080 for sale. Interested, please text me for details. Will be posting a separate thread for the eheim filter soon.

Still looking for a buyer.

I'm willing to trade for a Vortech mp 20/40 wavemaker. PM me to discuss.

I'm looking to sell my Dennerle Profi 588 PH controller ( the one green in color) for $200. Interested parties please pm me to deal. In great condition. It comes with the original PH probe. This is the model: http://freshnmarine.com.sg/estore/product_info.php?products_id=3199