supremo

bro, from what piece of plastic did you cut that from? looks really nice.

anybody have the above? looking to buy one. PM me if you have to sell. Cheers!

yeah bro, i guess no choice but go there myself thing is I don;t have a car which means I'll have to take taxi. Unless some bro can give me a ride anybody going to Irwana this weekend? I stay at Simei, anybody from nearby? wanted to stock up some saltwater so I could ask my maid to do change water in my (future) nano tank even when I'm away.

just want to share,m when I had a durso, I placed those good quality plastic air valves. allowed me adjust the air intake. actually, what happened was there was no shop near my place that sells end caps and I drilled the hole to big so siliconed a short air tube and terminate it with the bulb, worked for me

2.5' long bro.

bro, how many gallons is a tonne of water?

Hi bros, does any body know any shop in the east which sells NSW? And if they deliver? How much and minimum order? Thanks

okie. will check out the shops near my place. or maybe go Sim Lim tomorrow. Thanks

bro, i'm not sure what I'm seeing in your pic, but it looks like your using a male plug to connect to your light. wouldn;'t that be dangerous?

insteresting....may I know how many watts is it?

i saw it done by another bro here before, just copied it lah. what i did was to buy a 4" pvc and end caps about 2.5' long. then bought 50' of 1/4" plastic hose. then, very slowly and with lot and lots of patience, coil the hose inside the PVC. start from the top slowly coil down to the bottom. then secure the end near the bottom. i added some silicon to keep it in place. then bore 2 holes in the top end cap, 1 to let the other and of the hose to go through. the other hole, put a another hose that goes inside for around .5" be very careful not to have any kinks in the hose, cause you'll have a lot of problem to drive it. put some bioballs in the inside of the PVC, in the middle of the coiled hose. now attach the end caps. you'll have 2 hoses sticking out. 1 is the short 1 while the other is the one connected to the long hose. the one connected to the long hose is your input while the other is the output. i used a Sicce micra to push water in through the input and let the water coming out of the output drip back to my sump.

i have used DIY Coil Denitrator. Used it for around 9months. Took around 2 months before the output registered 0 nitrates. no deniballs or feeding done.

is it 220vac bro? do they have white? where is this shop bro?

sorry guys, my bro already collected by a bro who leaves nearby.

I've got a DIY Auto Topup set with 1 float switch. Anybody have a 1.5ft PL to trade?

upz while looking for a camera. Cheers!

Livesand collected. Cheers!

ok, i'll take a photo of the other 3 items and post later. Cheers!

2. Red Sea Classic Skimmer $125.00 (bought 2nd hand also, been with me for around 5 months) 3. UVC 9W - $25.00 4. Eheim 1262 - $175.00 (in water for 5 minutes only) 1. 3 x 2 x 2.5 (height) 10mm tank with cabinet (teak wood), DIY hood and 3ft sump. - $250 (around 1.5 yrs) Please note that the cabinet height is 90cm. That's taller than normal cabinets. Cleaned and dried and ready for pickup by tomorrow (Sunday 25/09/05). *** Won by Mabro thru bidding and will be collected latest by Saturday 30/9 ***

Bidding closed! Buy price has been met. Thanks bro. as agreed let's discuss tomorrow on the transport details. Cheers and good night everyone.

upz for the night

Thanks bro. The cabinet tank is now up for bid. Please refer to my other thread if interested. The other stuff still available. Cheers!

As the tank is just occupying prime real estate in my living room. have decided to sell the tank at a ridiculous price. I sell the tank at the highest bid by 12 noon on Sunday. Please place your bid in the thread so people could see the progress of the bidding. Starting bid is $150.00 To make it easier, I'll put a sell price of $200.00 . If you bid that amount, then the tank is yours, otherwise highest bidder by the end of the period will get to buy the tank at his bid price. This means you have the chance to own the tank for just $150.00 Details of the cabinet/tank 1. 3 x 2 x 2.5 (height) 2. 10mm thick 3. corner overflow with 2 holes, a 25mm and a 16mm 4. eurobracing is only on the top 5. age of tank is around 1.5 yrs 6. I am the second owner of the tank 7. I'll pass you whatever I was able to salvage from the existing piping, but buyer will have the responsibility to put them all back together. 8. The drain pipes that goes through the hole is still attached, I tried to remove it but I don;t have the tools. So buyer will be responsible to remove it if the mover so requires. 9. cabinet (teak wood), 10. cabinet height is 90cm 11. The cabinet base is 39" by 27" 12. A stainless stell bar is supplied to support the front of the cabinet 13. DIY Hood, opens in front and closed on three sides 14. hood height is 18 inches 15. Winner to arrange own transport 16. Collection could be on Weekdays (after 9PM until 11PM) 17. Last date of collection would be next Sunday (1 October 2005) 18. Please ask question through PM first if unsure before you bid and I'll reply if I could. 19. For pictures, please refer to my other recent threads. 20. Collection place is in Simei St 1 21. Bids placed hereon means you have read the above conditions and understood them. Bid with confidence. Cheers!

1. 3 x 2 x 2.5 (height) 10mm tank with cabinet (teak wood), DIY hood and 3ft sump. - $250 (around 1.5 yrs) Please note that the cabinet height is 90cm. That's taller than normal cabinets. Cleaned and dried and ready for pickup by tomorrow (Sunday 25/09/05). The tank when it still had fishes The side of the tank which could house the switches and timers. 2. Red Sea Classic Skimmer $125.00 (bought 2nd hand also, been with me for around 5 months) 3. UVC 9W - $25.00 4. Eheim 1262 - $175.00 (in water for 5 minutes only)

reserved by a bro until 7pm tonight.