stevenkoh08 Posted January 1, 2019 Share Posted January 1, 2019 1. 24vdc fan $10 2. Magnet 4x $1.50 3. Wire shrink $3 4. Wooden chopsticks - free 5. PCB board plate $2.50 6. Screw 7. Light dimmer $12(cause i broght high amp) can buy lower one n cheaper 8. Power inverter 220vac to 24vdc $22 (cause of i buy higher amp) can buy lower one n cheaper Step 1 Insert magnet and cut out chopstick into the wire shrink warp(remember to follow the length of the fan center portion as gilded for magnet to sit nicely) Step 2 Cut out the board into size for any of ur container to sit on follow by the cut out the scew hole and ctr opening Step 3 Paste the magnet w/super glue onto the fan ctr and use heater gun or fire to shrink the wire warp of the stirrer Step 4 Connect up the wiring of DC power supply and the ligt dimmer controller And that's it done Sorry can't add video Sent from Singapore Reef Club mobile app 1 Quote Link to comment Share on other sites More sharing options...
Uask4it Posted January 1, 2019 Share Posted January 1, 2019 Hi Stevenkoh08, thanks for sharing. Hope I understand the description well and will follow it. Two question. 1) Did you use up all 4 magnets or only used 1 pc for stiller and 1pc to paste on fan center. 2) As for PCB board can I replace with other board, if can't, possible to share the reason why. Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted January 1, 2019 Author Share Posted January 1, 2019 HiI have to use 4 magnet 2 on the fan and 2 for the stirrer and place in opposite directions.Any hard board will do but not too thick as it'll affect the stirrer to stay attach with the fan magnetSent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted January 1, 2019 Author Share Posted January 1, 2019 Remember not to use too strong of a magnet as it'll affect the stirrer, cause the floating effect will not be very good.There an same size magnet but stronger oneI got is 10mm x 3mmAnother one is 10mm x 5 mm (too strong)Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted January 1, 2019 Author Share Posted January 1, 2019 Done 3 of itSent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted January 1, 2019 Author Share Posted January 1, 2019 DimmerSent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
Uask4it Posted January 1, 2019 Share Posted January 1, 2019 Remember not to use too strong of a magnet as it'll affect the stirrer, cause the floating effect will not be very good.There an same size magnet but stronger oneI got is 10mm x 3mmAnother one is 10mm x 5 mm (too strong)Sent from Singapore Reef Club mobile app Thanks Stevenkoh08.Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted January 1, 2019 Author Share Posted January 1, 2019 1 power supply can use for all 3 stirrer kitSent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
stevenkoh08 Posted January 1, 2019 Author Share Posted January 1, 2019 Up to 12 set i can useSent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.