Help on MARCO skimmer!!

[pegasus1010]

the bubbles doesn't seem good enough.

[Sailfin123]

Hi,

Just to check in rdg of the Macro Skimmer - model **100.

Any typical hose that we can use??

The inlet tubing from the pump seem quite big size leh..

Pls ADVICES...

[dleecool]

pic of the water level

Hi,

From the pic, u can still adjust a little bit higher for wetter skimmate, but it's ok if u just leave it there. Ur bubble looks OK to me now.

Very strange, still no Skimmate? Unless ur water is super Clean!!

[saf168]

Have tried various method like positioning my pump higher/lower and my skimmer as well...

Occasionally able to obtain the bubble in the full chamber but it stop after the water level drop... does it mean this skimmer is not suitable for me?

quite sian liao... spent 2 weeks trying to get the skimate out but fruitless...

Any expert, who are hanging their as-150, can share your valuable advise??

Thanks a lot!!

[moxa]

Have tried various method like positioning my pump higher/lower and my skimmer as well...

Occasionally able to obtain the bubble in the full chamber but it stop after the water level drop... does it mean this skimmer is not suitable for me?

quite sian liao... spent 2 weeks trying to get the skimate out but fruitless...

Any expert, who are hanging their as-150, can share your valuable advise??

Thanks a lot!!

some finding

reliase if the bubbles rises too fast at the collection cup one of the reason is there is air trap at the water return pipe all you need is too poke finger into the water flow and you can immediate sees the bubbles will goes back to foam again.

took a while for me to tune it right when started to use few months back

http://www.sgreefclub.com/forum/index.php?...ndpost&p=286684

cheers

Moxa

[anthonykoh]

Suspect my pump is not working well now... hmmm

anyone using other pump other than the original??

can i tee-off from a 3000L/hr pump and use a control valve>?

but where do the air inlet tube suppose to go?

any advise?