how to increase ph

[jowenteo]

my tank is aquamedic nanowave 9. ard 10gallon or 39 litres.

recently i found oout that my ph drop to 7.6

how can i increase my ph to 8.

i need guidence on how to mix the buffer( to saltwater or tap water or tank water)

thanks.

[redspring]

my tank is aquamedic nanowave 9. ard 10gallon or 39 litres.

recently i found oout that my ph drop to 7.6

how can i increase my ph to 8.

i need guidence on how to mix the buffer( to saltwater or tap water or tank water)

thanks.

Use ph buffer

[jyoon]

my tank is aquamedic nanowave 9. ard 10gallon or 39 litres.

recently i found oout that my ph drop to 7.6

how can i increase my ph to 8.

i need guidence on how to mix the buffer( to saltwater or tap water or tank water)

thanks.

Do not increase your PH drastically. This is very stress full to your live stocks be in corals or fishes.

Here's my 2 cents:

1. Take out 1 -2 litres of your tank water.

2. Mix it with PH Buffer. Please read the instruction of the PH buffer you intend to use. Never over-dose.

3. Place this mix solution into a bottle that you can drip into your tank at 1 drip per seconds.

BTW what did you use to measure your PH? You may wish to confirm that your PH is 7.6 first.

Hope this help.

[RevellClownfish]

You can put in coral chip inside your tank..but need to change every 6 mth...Jus my 2 cent.

[Kalib]

Did you measure pH during the lights off period or when lights are on? During the lights off period, its normal for pH to dip slightly.