Jump to content

TonyL

Newbie 1
  • Posts

    24
  • Joined

  • Last visited

Posts posted by TonyL

  1. No....that why I have no clue. Even my 4inch Clam was tear apart left only on side which I believe will not survive as well. I did a fresh water dip for everything in the tank to get rid of all the hitchhikers. but like I mentioned only a few miserable small hairy crab which is less than 1/2 inches. My Flame is 2.5 inch and I don't think the small crab are the culprit. No remain nothing at all when I take down my whole tank. Septicle to buy any more fish....Sian.

    Anyway, thanks for all the advise.

  2. Hi snr,

    Anyone can advise why healthy fish missing one after another, I suspected Crabs and started to trap them. So far caught a few small hairy crab not bigger than 1/2 inch. However still have fish missing. First is my 1" Blue Tang, Next was my 2" Flame Angel. And another 3 smaller fishes. All eating and very healthy fishes. No trace of their remain etc....I suspect some BIG hitchhiker

    Yesterday, I took out every pcs of LF and dip into Fresh Water, again manage to catch 3 small hairy crab. I hope that the end of my era. Pray hard....

    Or anyone have similar experience and can share your removal method....thks

    regards

    TonyL

  3. My DIY setup as exactly copy from the above and the Tap water will run thru the ION exchange than follow into the Activated carbon. So it is like 2 stage purifying.

    However, the question here is which stage to run first. Madpet advise was to run Carbon before the ION. But I did the reverse and the results still measuring as zero.

    Hopefully, I am doing the right way...thks

  4. Hi Senoir

    Need advise on below:

    1) Water start to get cloudy after installing bio pellet reactor ..3day start to get cloudy

    Will nitrate drop once water get clear. Can add livestocks or coral after nitrate drop?

    2)Do we need to change water after water clear?

    3) Will the livestocks able to ride thru the nitrate export transit period?

    Usually how long does it takes to get over the cloudy period?

    Tank profile:

    3X2X2 with Sump (coral chip)

    5 week old

    NO1, NO2 & PO4 zero

    NO3 50mg/l

    PH 8.08

    salinity 1.024

    Temp 29 to 30 degree

    Equipment

    Lights : 6 x T5 ( 3blue 3white) lights on at 2pm till 11pm

    JBL Protein skimmer

    Phos reactor

    Biopellet reactor

    Fan....Not using chiller

    Using Redsea salt mix to set up tank

    Top up with DI water regularly

    Dose MicroBacter7 daily

    Livestocks

    LiveRocks

    1 X 1.5" Yellow Tang

    1 X 1" Blue Tang

    2 X 1.5" Clown

    2 X 1" Skunk shrimp

    Above doing fine

    Coral

    1 X 3" Crosea Clam

    3 X Mushroom

    3 X Zoas

    1 X 3" leather

    Above doing fine

    Worried as Nitrate start to rise higher and higher. So decided the biopellet reactor

    install on Thurdsay and water turn cloudy Saturday

    Hairline and brown algae appearing on tank

    BTW, also set up a Algae scrubber 1 week ago and can see brown algae appearing on the flow mat.

    Appreciate advise and thanking all in advance.

    Best regards

    TonyL

  5. Hi Sir,

    Thanks for the advise, I extended by adding another bottle of Activated carbon. With this combination, can I forgo adding Anti Chlorine. Appreciate so much ...thks

    regards

  6. Hi Senoir,

    I have try using your above DIY DI water method and result is immediate and within an hour, my TDS meter from 6 to 0. Does that mean I have successfully filter my tap water to DI water. Do I need to add Anti Chlorine. I also follow your recommended media. Do I need to run thru additional other media purification before I can use the water as Top up.

    Appreciate your valuable advise...thks

    regards

    TonyL

×
×
  • Create New...