blackpuma
-
Posts
195 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by blackpuma
-
-
Any Bro know where to get this PVC connector for 15mm piping???Me staying in jurong side.
Regards
Melvin
Hi Melvin,
You can get it here:
Address : 11 Third Lok Yang Rd Singapore 628006
Telephone : 6268 0330
Fax : 6265 0330
Email : ahhe803@pacific.net.sg
URL : http://www.aikhock.com.sg
Let me know if you need more help
Regards
-
Hi Forum,
Need to find a shop in the bukit merah area or nearby to buy PVC pipes and fittings. Any recommendation ?
-
Hi blackpuma, yr down U- channal is too low (can not lower than the surface skimmer)
Hi Melvin,
Thanks for your speedy response, will modify the design.
you
-
Hi all,
I followed the instructions given by this thread and diy'ed the overflow. Flow rate is fantastic but I am left wih one problem, the siphon will not re-start when power resumes after a power failure to the return pump in the sump
The test is done with both the cap on and off. Could it be the difference in heght between the input and output of the overflow is too much.
Also, I copied the design and I hope no one is offended.
Any help with the siphon re-start problem is much appreciated
Thanks
-
You can contact me on 97895334 Peter i got a high speed hand held Reamer can help out with you i stay in the east
97895334Peter
Hi Peter,
Thanks for your offer . Managed to drill the holes uding a hole saw.
Thanks anyway.
-
All
-
where can i get O-rings ?
thanx
Also PM'ed you
-
anyone has a contact pls PM me
PM'ed u
-
Hi All,
I need to drill a 25mm hole on a dome shaped PVC strainer. Can anyone give advice on what tool to use for drilling such a big hole.
The maximum size I can find in my drill set is about 10mm
Thanks for the help.
-
Hi All,
This is my madien post.
Have a old 3 feet tank. Drilled the tank to take a 20mm PVC pipe as overflow. There is no box surrounding this overflow pipe and the pipe is just sticking out on the left hand side of the tank.
When I pump the water from my sump, the overflow is very noisy, how to silence it. ? I have tried stcking a PVC hose in to the overflow pipe as suggested by others but with no improvement.
Please help and thanks in advance.
Skimmers of yesteryear
in Product Reviews
Posted
Hi Forum,
I am coming back to this facinating hobby after a long lay off and have some very old skimmers, like the Sanders WT 350 and the Azoo super tri skimmer.
I am intending to set up a 3 X 2 X 1.5 fowlr with live rock and intend to use the sanders wt 350 as the sole means of water purification, if that is not sufficeint, I will throw in the Azoo as well. My system also have a sump measuring 3 X 2 X 1 and all the skimmers will reside in the sump.
Eventually when the tank matures, it will be stocked with at most 4 to 5 small fishes and some soft corals.
Any comments as to weather the skimming is sufficient, or do I really need a high tech present day skimmer to do the job?
I stay in the south and is the tap water there good enuf for such a tank or do I have to invest in a RO/DI unit for my salt mix ?
Thanks for reading this longish post.
Regards,
Blackpuma