use this fomular:
Power = Current x Voltage
You have 2x 150Watts MH
300watts /220 volt = 1.363 Amp current
Chiller should be about 2-3 Amp, check it out from your chiller.
Each pump use less then 1 Amp.
Just adding it up for the total current require.
Normal 3 pin plug should be able to supply you with 13 Amp current.
As long as the total current load is not exit 10 Amp, you should be save.
Hope the above help. Correct me if I'm wrong
Hi Reefer,
Please do advise on the type of additive require
for a reef tank with CR setup.
As far as I know, CR is use to maintained calcium and alk at desired levels.
How about Iodide, Strontium, Trace Element, Magnesium.. ?? Doing require??
Oppp..
"The worb BULB is missing"
Sorry for the misleading title.
$100 is for the NEW USHIO MH bulb 10KK only.
NOT complate light set.
Well, if you looking for 3ft MH light set for sell.
3 ft WEIPRO LF95 for sell @ $280.
NEW cost about $600 Plus.
OR
Trade for ATI Twin-Fix Retrofit - 2 x 39 watts / 3 feet light set. (With ATI AquaBlue Special & ATI Actinic Blue Tubes)
Got the following spare after upgraded :-
1. 3ft WEIPRO LF-95 with 150Watts MH & 2 27Watts PL
2. RESUN CL-450 Chiller. (Used less then 2 weeks)
Both items selling for $650 NEG.
How could tthis happen?
If you add tap water it change from BLUE to RED for sure.
How come KALK change the colour from BLUE to RED.
All the best..
Too bad we stay too far apart, else can't lend you my test kit to try..
Oppp...
Sorry for the misleading.
Got the 3 footer 2nd hand. Transport everythings from the tank.
Include Salt Water
Did not remove the sandbad from the tank during moving lor.
Super the heavy....
Not that I did not cycle the tank...
surfedelic Posted on Oct 27 2004, 02:05 PM
Nice tank. Does your rabbitfish nip at the corals ?
As up to date still fine..
strat Posted on Oct 27 2004, 02:21 PM
You sure got lots of fish for a 3 footer
Yeep.. about 20-30 I guess..