Jump to content

stormrider

Newbie 1
  • Posts

    75
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by stormrider

  1. Sharing my input with photo on my setup.

    Fliter wool still need to be replace like every 4 weeks or when it is about to get choke up. During wool replacement, siphon water till it drop below the egg crate to prevent chaeto bits falling off during wool replacement.

    20180930_061523.jpg

  2. I always love to own a Vortech pump. It’s the design that draws lots of attention. Costly it is... but i heard Jebao quality is not there yet.

    My own experience with a RW4, I had seen rust at the controller power input and the magnet inside the tank fall off while carrying out maintenance. The Magnet also leave behind a faint mark on the tank glass. :(

     

  3. Thanks SubzeroLT.

    I will bring the unit to Madpetz and see if changing gauge helps.

    My pressure gauge always at Zero.

    And with pump activated, output of the water is with pretty good flow. Without pump, the output is slow. (no experience with RODI). 

    BTW, do we need to calibrate the TDS meter? 

  4. Hi reefers, 

    I got myself a 2nd hand RODI unit that comes with a pump and had set it up for the first time. I had run it for at least 15mins but the pressure gauge doesnt move. 

    How to get a minimum 50psi pressure?

    Input of TSI was 54 and Output of TSI was 0.

    I had not open the cartridges... its a a very difficult task to open them too.

    Appreciate RODI users to advice. Thank you.

     

    86588D66-6769-4570-ADD7-8E3A8A2CE3BD.jpeg

  5. If nitrite is detected, it is going through cycling. 

    Suggest you wait for a bit longer, 1-2 weeks more with some sample testing. After tank was cycled, I understood it will follow with diatom booming on your rocks.

    By then adding 1-2 hardy fish will tell you if the tank is stable...and welcome to this hobby :)

  6. Hi Thanos,

    Tank should have ammonia spikes follow by nitrite. Nitrate should increase gradually after cycling.

    If the tank doesn't have this reading, it seems to me that it had not done cycling. Since you had added some live rocks, Cycling period might had been shorten.

    What type water are you using? Natural Sea Water or Salt mix? Natural sea water will also help to shorten cycling period. From my experience, one week should be sufficient to complete cycling with NSW. Salt mix will take much longer.

  7. 39 minutes ago, Tabungrahim said:

    What u have in ur tank?
    What u put in the chamber of ur ios tank? Just enquiry my tank also buy from Pinnacle aquatics

    Sent from Singapore Reef Club mobile app
     

    1st Chamber : Filter wool,  1 x small bag PhosRowa, 2 x Chemipure Blue nano, Biosphere

    2nd Chamber: Chaeto and Biosphere

    3rd Chamber: 2 x return pumps connected to 1 x Chill solution.

    Main Display:

    9 x fish ; 1 x fire shrimp ; 1 x turbo snail ; 1 x Torch coral ; 1 x Jewel coal  ;  8 polyps Zoa

    3 x Ricordea Florida ; 11 Polyps Duncan coral ; 1 x spongodes montipora (Recently added) 

  8. 5 hours ago, Indeco said:

    Oh ok, so I don't need to treat the tank water just let it run by itself... Will not buy any clown for the moment... maybe will look for goby or blenny

    my PH do fluctuate between 7.6 to 8, I guess is because I do a lot of water changes... 

    below are my tank setup, the one you see is I put them into the plastic tank liao...

     

    20180721_131116.jpg

    From this photo, i felt there might be not enough bacterial to be house in the tank. A few rocks might help to maintain stable. Just my thought.

×
×
  • Create New...