-
Posts
955 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Posts posted by YzF
-
-
Thanks Jameshong!
I have been reading for the past few days. *Headache*
But there are still some things that i dun understand due to the lack of electrical knowledge.
Can help me to see if the steps below is correct?
I will most probbably be mounting the LEDs to a aluminium sheet with 2 fans on top to help with the heat.
Let say i wanted to DIY a 10 LED (SSC P4) LED lightset and a 1 pc LED (Royal blue) for night light.
Each LED is about 3.75V and drives at 750mA. Then how to drive the single LED separately
In order to choose a correct DC input, then calculate power consumption 3.75*10=37.5V and 7.5A
I know I need a Constant Current driver to drive the P4 at 750~1000mA. But how many do i need?
So i need to find a DC adapter to fit 37.5V and 7.5A? Or fit the Constant Current Driver?
I also need to add in fans. These are normally at 12V. So in order not to use another DC adapter, I need to connect 2 fans in series?
With means that the total power consumption become:
37.5 + 24 = 61.5V and hence i need to find a DC input with this rating?
-
-
WTS 2 x Tunze 6060 and 1 Tunze magnetic holder
Tunze @ $80 each
Magnetic holder at $30
Contact at 96897112
-
Bro Fuel,
Cool to see you still in the hobby. I looking around to see if i can make a comeback!.. Cheers~
-
Nice, its been a while since i came into the forum.
Can i check what are the spec of the LED? Mainly the spectrum of the LED and if the LS can be substain long term?
-
I have the following for sale.
GroTech Magnesium Pro 1000g
GroTech VitAmino M 500mL
GroTech Corall A 500mL
GroTech Corall B 500mL
GroTech Corall C 500mL
Selling all for $100. Package sale prefered.
Collection in Hougang.
-
Hi all,
Planning to downgrade to smaller tank. Anyone has any 2 feet cube to let go?Please pm me the details.
Cheers~
-
Purple tip acro $25 *SOLD*
Orange Humi (Brown out) $15 *SOLD*
-
No pics for now.
Btw the frags vary will be at least 2" in size
-
Hi all,
I have some frags to clear...
Frags:
Green plating Monti $10
Orange plating Monti $10
Purple plating Monti $25
Green polyp plating Monti $20
Colony:
Orange encrusting Monti $30
Blue tip Acro $20
Blue tip Staghorn $40
Purple tip acro $25
Orange Humi (Brown out) $15
Viewing at night at Hougang area. Pm for more details.
-
Hi all,
I am looking for 2 items. Any one with the below equipment for sale please pm me the details and price.
1) Clip-on MH
2) Iceprobe
Thanks.
-
Reserved for viewing.
-
Sold!
Mods please help to close thread. Thanks all.
-
Awaiting collection.
-
Some thing to add.
The chiller fan bearing is a little faulty. Will produce a 'ting' sound sometimes when starting or stopping. Very quiet during operation though.
The condenser was changed before to improved the heat exchange efficiency.
-
Have a unit of TS 7 for sale. $370
Comes with single controller.
Collection place in Hougang.
-
Price revised to $350. Upgrading.
Do a search to understand more about Teco.
-
I have one if you wan
-
Cool!
How about your
-tank dimension
-Temp
-calcium
-dkh
-Type of Water used. NSW or salt mix
-What else is in the tank? Fishes?
-
Can i know the spec of your system?
What light are you using?
What are your water parameters like?
-
Hi all,
Planning to sell my Teco RA 680. Chiller still hooked on to the tank now.
Chiller with me for abt 3 years now. Looking at $430.
Interested parties please contact through pm.
-
Bro Warner..Nice Yuma collection you got there, how are the yumas doing now? Do you have a better pic of the blue fellow?
-
Was at Ah beng.. saw a very nice sponge in the display tank. retailing at OMG price.
Never see it before even on picture.
-
I Wan to add my order....
LED Panel
in DIY Forum
Posted
Hey Barra,
How come your post only 9 har? I tot i remember you were around when i still have my old tank.. Haha..
Anyway, dun matter who reply the post ah. Thanks by the way.
I am still trying to configure the light setting so the number to LEDs are not firm up yet.
Mainly the cost of the lightset is a concern. Different configuration have quite a different cost. Mainly due to the number and type of CCD used.
I was reading somewhere that the main disadvantage of connecting LEDs parallel is that there is a risk to losing all the LEDs.
So a mirror was incorporated to protect the parallel circuit. But i got no idea how to do it. So i guess i have to stick to having the series for now.
It seems that the normal configuration for color is 1:1. Normally 2 circuit will be up. 1st circuit control white LED and the 2nd control blue.
With this configuration, it also gives control for dawn to dusk effect simply with timers.
However, i'm worried that the blue will be too bright at night. That why i was thinking of having a separate blue LED for night and the rest of the LED controlled by just 1 circuit.
Noob question:
For 6 LED (SSC P4), connected in series, total power is 3.75V*6=22.5V, 700mA*6=4.2A
If using output of 24V DC 4A,
1) What happen to the additional 24-22.5=1.5V?
2) 4A cannot meet 4.2A requirement. So the LED will be running slightly lower than 700mA?
3) If i run 5 LED bulb instead, it become 3.75V*5=18.75V, 700mA*5=3.5A, then what happen to the additional amperes? It will be controlled by the CCD?
I also wish to install a dimmer to control the LEDs. I only know is by PWM for now. How to install it?
Paiseh.. to ask so many questions.. but will have more...ahahahah