Jump to content

Elos Osmocontroller or Tunze Osmolator 3155


stmomo
 Share

Recommended Posts

Hi Guys, thinking of getting ATO for my tank but do not know which one to choose.

A little feedback on both or either one would be good.....

Thank You..... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

  • SRC Member

Tunze. Best investment I've made for the tank. It has a laser eye water level sensor as well as a float switch as a secondary fail safe. It is also equipt with an audible alarm to alert you if the water level get pass the 2 sensor. It comes with a pump and a length of tube too, just plug and play, no need to purchase any more add on or accessories. The newer model of the Tunze Osmolator has a magnetic mount for the 2 sensor. The older model comes with a mounting kit that is hanged from the glass tank.

Connect the Tunze Osmolator to a timer and attached a kalkwasser reactor at the output of the tunze pump and you have a setup to maintain the ph swing during the night. All you need to do is to top up your freshwater container as well as add kalkwasser to your kalkwasser reactor when needed. Been using this setup combo for 6 years without any intervention since it was installed.

Link to comment
Share on other sites

Tunze. Best investment I've made for the tank. It has a laser eye water level sensor as well as a float switch as a secondary fail safe. It is also equipt with an audible alarm to alert you if the water level get pass the 2 sensor. It comes with a pump and a length of tube too, just plug and play, no need to purchase any more add on or accessories. The newer model of the Tunze Osmolator has a magnetic mount for the 2 sensor. The older model comes with a mounting kit that is hanged from the glass tank.

Connect the Tunze Osmolator to a timer and attached a kalkwasser reactor at the output of the tunze pump and you have a setup to maintain the ph swing during the night. All you need to do is to top up your freshwater container as well as add kalkwasser to your kalkwasser reactor when needed. Been using this setup combo for 6 years without any intervention since it was installed.

Thanks Bro.... can feel the powerful satisfaction of the product from what u had said..... :)

Not really understand regarding the kalkwasser part. Sorry ha... new to this... u mean i need to get another kalkwasser reactor, then connect the output of the tunze pump to the reactor, after that then to sump? tio bo ha? btw my PH during day and night only slight diff.... eg day is between 8.15-8.19.... night is between 8.09-8.12... still ok right or i need th kalkwasser? btw kalkwasser is KH right? I don knw whether i measure wrongly bo leh.... measured twice, Salifert Test Kit, for the pass 2 weeks, KH is around 5.1 leh... since like very low leh......

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

  • SRC Member

Usually, the Tunze Osmolator would be paired together with a kalkwasser reactor for auto top up as well as maintaining the ph of the water, not kh. Since your water ph swing is slight, you might get away without the need for a kalkwasser reactor. Good to have a kalkwasser reactor but some might not agree.

Link to comment
Share on other sites

  • SRC Member

Usually, the Tunze Osmolator would be paired together with a kalkwasser reactor for auto top up as well as maintaining the ph of the water, not kh. Since your water ph swing is slight, you might get away without the need for a kalkwasser reactor. Good to have a kalkwasser reactor but some might not agree.

Link to comment
Share on other sites

Usually, the Tunze Osmolator would be paired together with a kalkwasser reactor for auto top up as well as maintaining the ph of the water, not kh. Since your water ph swing is slight, you might get away without the need for a kalkwasser reactor. Good to have a kalkwasser reactor but some might not agree.

Thanks bro.... sorry my bad.... KH is actually carbonate hardness right? keke.... always mix up with Kalkwasser.......

Thanks for the advice again..... :)

Main Tank: 4x2x2 with 5 FT Piano Finishing Cabinet

Sump Tank: 32" by 18" by 16"

Arctica Chiller 1/4 HP DBE 200

Vortech MP40wES Wavemaker

Skimz 201 Skimmer

DE Lighting Retro Fit 6x54W T5 tubes

Eheim 1264 Chiller and Return Pump

American Pinpoint PH and Temperature Monitor

KDK 15WUD Chiller Compartment Fan

Tunze Osmolator ATO

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Selling RBTA

    2. 0

      ❅ Insane Zoanthid Deals ❅

    3. 0

      +447878203163 Kaufen Sie einen österreichischen Führerschein

    4. 0

      +4915215644767 einen deutschen Führerschein kaufen

×
×
  • Create New...