xredellahayes Posted May 8, 2018 Share Posted May 8, 2018 Hi , I just did my test for amm, ph , nrite & nrate . Amm -0 Ph- 8.2 Nrite - 0 NIRATE @ 80 ppm! I had water change about 4 days ago of , 30 percent . What can I do to lower my NIRATE to 20ppm ? Not looking into totally zero , but 80ppm kinda scares me . I had a number of corals and fishes leaving in it . Don’t wish that because of NIRATE problem it all might die . Seriously needing help !! Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 8, 2018 SRC Member Share Posted May 8, 2018 I’m a newbie also and I had high nitrates for a while too, but definitely not 80. I use marine block and another brand of media (cant remember brand), bacter 7, carbon, chemi-pure and it hovered around 10-20 initially. Now it’s lower than 5 within a week, After I used chaeto. I also do weekly wc of 10-15%. Maybe you can reduce your feeding? Could be excess food, or even something died? Quote Link to comment Share on other sites More sharing options...
sherman Posted May 9, 2018 Share Posted May 9, 2018 I believe your tank is not in the cycling stage. How to export your nutrient? You doing anything to bind your nutrient ? If have let us know what u doing to bind your nutrient build up Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Schwantz Posted May 9, 2018 SRC Member Share Posted May 9, 2018 After installing the SKIMZ MBR127, my nitrates went down to 1. I think i have to dial back on the photo period from 12 to 9 hours. You don't want nitrates to be zero.Sent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 I’m thinking if my skimmer is too small for my tank ?Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 I believe your tank is not in the cycling stage. How to export your nutrient? You doing anything to bind your nutrient ? If have let us know what u doing to bind your nutrient build up I’ll show u the whole set of product I use to maintain the fish tank . Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 I’m a newbie also and I had high nitrates for a while too, but definitely not 80. I use marine block and another brand of media (cant remember brand), bacter 7, carbon, chemi-pure and it hovered around 10-20 initially. Now it’s lower than 5 within a week, After I used chaeto. I also do weekly wc of 10-15%. Maybe you can reduce your feeding? Could be excess food, or even something died? I’m actually feeding frozen small shrimp (mysis) Thinking if it might be the problemSent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 9, 2018 SRC Member Share Posted May 9, 2018 I’m thinking if my skimmer is too small for my tank ?Sent from Singapore Reef Club mobile app Your tank looks familiar. Lol Reefmax? I think the skimmer is ok. How long have u been using the red bag(phospate) remover and carbon. If ur load is heavy. U may have to Change every 2 months or even shorter. It may do more harm than good. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 9, 2018 SRC Member Share Posted May 9, 2018 I’m actually feeding frozen small shrimp (mysis) Thinking if it might be the problemSent from Singapore Reef Club mobile app I use a net thingy with handle to rinse the Mysis before feeding. The “dirty” water does not enter ur tank. Do a Mixture of pellets and frozen food. Actually pellets are very nutritious and don’t pollute ur water as much as frozen food. (Provided left over food is scooped up). As ur tank is a 2 feet. The impact maybe greater when u feed frozen food daily. I was using the same skimmer and It may take more fine tuning to make it wilt correctly. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 Your tank looks familiar. Lol Reefmax? I think the skimmer is ok. How long have u been using the red bag(phospate) remover and carbon. If ur load is heavy. U may have to Change every 2 months or even shorter. It may do more harm than good. Sent from my iPhone using Tapatalk About 2 weeks ? Is there any other kind to put in beside phosphate ?Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 About 2 weeks ? Is there any other kind to put in beside phosphate ?Sent from Singapore Reef Club mobile app Is it ok if I change to this instead of using the red bag ?Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 9, 2018 SRC Member Share Posted May 9, 2018 About 2 weeks ? Is there any other kind to put in beside phosphate ?Sent from Singapore Reef Club mobile app I think ur tank is under going cycling lol. Try using better bacteria like micro bacteria 7 and dose according to the recommended dosage. Should help. Btw I don’t see any wool at the top. It will help if you change it more often. And one thing to note for AIO. Check the mid compartment. There was once I overfed and lots of leftover food was stuck at the mid compartment. I had a huge nitrate spike. Do u turn off the pump when u feed? If not it may go straight through to the skimmer compartment. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 I’ll show u the whole set of product I use to maintain the fish tank . Sent from Singapore Reef Club mobile app Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 Is it ok if I change to this instead of using the red bag ?Sent from Singapore Reef Club mobile app Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 9, 2018 SRC Member Share Posted May 9, 2018 I basically had the same tank and using the same supplements as what ur using. Did u dose 2 spoons of the bacteria weekly? Ur tank doesn’t look heavily stocked. I suspect it’s not cycled yet. And please check ur mid compartment for left over food. Reduce the feeding and smaller portions. Remove any uneaten food immediately. Should be ok soon. not sure about the bio pearls. Never use that before. U may have to check with other bros. Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 Your tank looks familiar. Lol Reefmax? I think the skimmer is ok. How long have u been using the red bag(phospate) remover and carbon. If ur load is heavy. U may have to Change every 2 months or even shorter. It may do more harm than good. Sent from my iPhone using Tapatalk I just got this tank about 2 weeks ago . It was all good at the start . I think I might need to find another kind of phoyOk I’ll do so today , thanks for the information Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
sherman Posted May 9, 2018 Share Posted May 9, 2018 Your skimmer only water? No skimmer? I think not tune properly. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 9, 2018 SRC Member Share Posted May 9, 2018 Your skimmer only water? No skimmer? I think not tune properly. Ur right bro Sherman. I was using the same exact skimmer and it’s very hard to adjust and very easy to overflow. I have to set it to latch on the other end and prop all the way up. In the end set to dry skin. LolSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
sherman Posted May 9, 2018 Share Posted May 9, 2018 I have not use this before. So no comment. How big is your tank volume? Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
xredellahayes Posted May 9, 2018 Author Share Posted May 9, 2018 So anyway guys , I went ahead to remove the red bag u guys saw in my tank and replace with this 2 product . From a 80ppm NIRATE to 40ppm . Lol I dk if I should be happy or sad . It’s still high Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 10, 2018 SRC Member Share Posted May 10, 2018 So anyway guys , I went ahead to remove the red bag u guys saw in my tank and replace with this 2 product . From a 80ppm NIRATE to 40ppm . Lol I dk if I should be happy or sad . It’s still high Sent from Singapore Reef Club mobile app It takes time bro. Won’t happen overnight. Try to adjust ur skimmer. If it overflows prop it up higher. It should have load of scum like this. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
xredellahayes Posted May 10, 2018 Author Share Posted May 10, 2018 It takes time bro. Won’t happen overnight. Try to adjust ur skimmer. If it overflows prop it up higher. It should have load of scum like this. Sent from my iPhone using Tapatalk I just wash it 2 days ago . Can it be like this ? This is the highest I can go . Sent from Singapore Reef Club mobile app Quote Link to comment Share on other sites More sharing options...
SRC Member Jeebusai Posted May 10, 2018 SRC Member Share Posted May 10, 2018 Yes this is the highest u can go. U monitor ur air intake. If it still overflow then u may need a sponge to limit the air. But it looks ok to me. Can consider a better skimmer that can fit. Even for a day should be quite dirty. I think can fine tune more. Lol Quote Link to comment Share on other sites More sharing options...
sherman Posted May 10, 2018 Share Posted May 10, 2018 Skimmer is a very important piece of equipment in our close reef system. Please get the best you can afford. Quote 6.5 * 2 * 2 + 3.75 * 1.5 *1.5,(Decomn on 14/9/08) 4*2*2 + 2.5*1.25*1.25 (Decomn on 1/8/09) 5*2*2 (Fully LED light system, 140 3 watt SSC leds with 60 degree lens)(Decomm) 2.5*2*2(Fully LED Light System,96 3 watt SSC leds with 60 degree lens)(Decomm) 5*2.5*2(LED only) Eheim return 1 * pump 1 HP Daikin compressor with cooling coil 2 Jebao OW40, 1 ecotech MP40, 1X6085 Tunze wm, 1 CURVE 7 Skimmer 1 DIY 80 led control by Bluefish mini 1 radion XR30W G2, 2 Radion XR15G3 Sump area lite by 5 ft T5 , 6 * SSC 3 watt red LED for refugium 1 Full spectrum E27 led light 1 CR control by bubble count Start No Water Change since 1st Dec 2016 Add new 2.5x2x 1.5 ft [/quote] Link to comment Share on other sites More sharing options...
sivaveeria Posted May 12, 2018 Share Posted May 12, 2018 Got the same issue with Nitrate, was standing at 50ppm and 50% water change brought down for few days and up again, finally decided to remove the substrate and leave the tank bare bottom, and did 80 % water change, nitrate now has been stabil at 0ppm for 6weeks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.