BKChoo Posted August 4, 2010 Share Posted August 4, 2010 Dear bros, Having problem with my MP40. its abt 6months old . Since last week it keep stopping and driver's RED led keep blinking. i need to off and on power supply in order to kick start again. Any bros here experience this before and can share how to fix it. Many thanks BK Quote Link to comment Share on other sites More sharing options...
Terryz_ Posted August 4, 2010 Share Posted August 4, 2010 Dear bros, Having problem with my MP40. its abt 6months old . Since last week it keep stopping and driver's RED led keep blinking. i need to off and on power supply in order to kick start again. Any bros here experience this before and can share how to fix it. Many thanks BK Check the wet side frame and the ceramic washer see if they are not broken? Quote Member of: Link to comment Share on other sites More sharing options...
clee123 Posted August 4, 2010 Share Posted August 4, 2010 Check the wet side frame and the ceramic washer see if they are not broken? The driver usually does not have any problem... it's always the wet side part the need to check... you might want to do some check and clear up... Quote Link to comment Share on other sites More sharing options...
cedricang Posted August 4, 2010 Share Posted August 4, 2010 Check the wet side frame and the ceramic washer see if they are not broken? Bro, Terryz and Clee is probably right on the wet unit. Most likely, the ceramic washer is worn off (need not be broken) causing the symptom you are experiencing. Looks like you need to get a replacement for the wet side. Positioning the wet unit in sync with the driver ( i.e. without much vibration from the wet unit either by noise or feel by hand ) will help keep the life spend of the ceramic washer. Quote Treat others the way you wanna be treated... Link to comment Share on other sites More sharing options...
gny Posted August 5, 2010 Share Posted August 5, 2010 Either its worn out causing the rotor to 'jam'. Need to replacement. If yr model is old one like mine, need change the whole wet unit(new model). Replacement cost is reasonable. Quote Link to comment Share on other sites More sharing options...
CFOh Posted August 19, 2010 Share Posted August 19, 2010 Dear bros, Having problem with my MP40. its abt 6months old . Since last week it keep stopping and driver's RED led keep blinking. i need to off and on power supply in order to kick start again. Any bros here experience this before and can share how to fix it. Many thanks BK Sorry.. just notice your question.... I facing the same problem as you on my new vortech previously... pls find below the fixes... The flashing red light indicates a pump disconnect error. We've found that the MP10 motors don't really take to our pump-disconnect calibration procedure, with some portion of motors that have been calibrated experiencing falls stalls, especially at lower RPM's. To correct this, simply cancel the pump disconnect calibration by performing the following steps: hold mode (pump blinks white) hold mode and set (pump blinks yellow/white) cycle power to the pump Cheers and Happy Reefing.... Quote LFS Map in singapore __________________ ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º> ·´¯`·.¸. , . .·´¯`·.. >((((º> Cheers and Happy Reefing.... Link to comment Share on other sites More sharing options...
CFOh Posted August 19, 2010 Share Posted August 19, 2010 Sorry.. just notice your question.... I facing the same problem as you on my new vortech previously... pls find below the fixes... The flashing red light indicates a pump disconnect error. We've found that the MP10 motors don't really take to our pump-disconnect calibration procedure, with some portion of motors that have been calibrated experiencing falls stalls, especially at lower RPM's. To correct this, simply cancel the pump disconnect calibration by performing the following steps: hold mode (pump blinks white) hold mode and set (pump blinks yellow/white) cycle power to the pump Cheers and Happy Reefing.... In case, doubt on the cycle power procedure.. power cycle = unplug the power probably, ask another friend help to unplug for you while you holding mode and set... Cheers and Happy Reefing..... Quote LFS Map in singapore __________________ ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º> ·´¯`·.¸. , . .·´¯`·.. >((((º> Cheers and Happy Reefing.... Link to comment Share on other sites More sharing options...
BKChoo Posted August 21, 2010 Author Share Posted August 21, 2010 Thanks for the input bros. Usually it will only happened after 5-6hr running at reef-crest random mode (yellow color). Other mode doing good. Trying method from bro CFOH. Under monitoring. Thanks all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.