sanju1998

Friends, Which skimmer is better ViaAqua Multi Skimmer or Red Sea PRIZM Deluxe? Please guide....I am looking for a hang on back skimmer for my 50 gallon tank and do not have a sump. Help me decide based on your experience Is PRIZM ozone compatible? Thanks,

Is this hair algae or Bryopsis algae or something else? Please help ID this.

Hi, I wanted to check with all the friend here if anyone has an (second-hand/used) Hang-on back AquaC Remora Skimmer for a 50 gallon tank for sale in a good condition. (off course at an affordable price) If yes, please let me know and if you can ship it to me in Mumbai, India. Thanks.

Many Thanks AhSiang. I am a bit confused...please can you help mark the water level on the attached image. Thanks.

Many Thanks AhSiang. Could you post me a picture to get an idea of the water level. A diagram will also do. Thanks.

Hi Friends, I have purchased a Jebo 180 hang-on skimmer and its been 4 weeks that I am breaking my head to make the skimmer work by adjusting the air-valve.. I would appreciate if some of the friends here can guide me on how to fine-tune/adjust the skimmer/water level. Also, it would be great if have some pictures of a working Jebo 180 skimmer. Thanks,

Hi Friends, I would be visiting Singapore next week and would be staying at Raffles Boulevard, Marina Square, Singapore 039595. Please could you advice me a good marine store which is close to the above place to buy products from my semi-reef marine tank. (in particular Seachem products, skimmers and other accessories at reasonable prices) Thanks.

Hi Friends, I am planning to upgrade my existing airstone skimmer. Please can you suggest which out of the two is a better hang-on-back skimmer that I can install in my 48 gallon semi-reef tank. ..(I do not have a sump) Should I go in for the Via Aqua skimmer or the Red Sea Prizm skimmer? Weipro is also available but I do not know if it is hang on back. Other high-end skimmers are not available or are expensive in India. Please suggest Thanks. Sanju

Please can you help me identify the names of the Two Orange corals that are in the picture below. Kindly zoom if unclear. Many Thanks.

Hello Friends, Please can you help me identify the names of the Two Orange corals that are in the picture below. Many Thanks.

Thanks Friend. Any one has got experience with the Dymax - X30Nano or VS10 model? Please can you help suggest a Dymax model for my tank (specifications above)

Thanks Friends, I have shortlisted the Dymax (X30Nano or VS10 model) and Red Sea Prizm Deluxe. The rest of the suggested skimmers are not available in India and the available ones are pretty expensive. Now, I need your help. From the Dymax (X30Nano or VS10 model) and Red Sea Prizm Deluxe, what do you suggest for my tank before I buy. Thanks a lot.

Thanks Bro. Please can you suggest/recommend a model for the Dymax skimmer which would suit my tank.

Thank You. I will check the availability of the Aquamedic Biostar Flotor in India. Meanwhile before I buy the Prizm, I would like to know, if this would fit externally as a hang on back on my tank, given the wooden hood that I have in the picture. Secondly, does the Prizm overflow from the cup and flood the floor with water?

Thank You Friends for your prompt support. Before I buy the Prizm, I would like to know, if this would fit externally as a hang on back, given the wooden hood that I have in the picture. Secondly, does the Prizm overflow from the cup and flood the floor with water? Thanks.

Hello Friends, Please can you suggest me a suitable skimmer which I can install in my 48 gallon semi-reef tank. ..I do not have a sump so the only options for the skimmer are internal or a hang on back skimmer. Please can you suggest a suitable skimmer which is low in maintenance. Can the Red Sea Prizm on this tank. Picture below: (not latest but it gives an idea of the dimension. Thanks.

My 48 gallon FOWLR...Please rate/comment to make this better....

I have the following fishes: 1. Brown Tang (One) 2. Blue Ring Angel (One) 3. Electric Blue Damsel (One) 4. Blue Carpet Anemone (One) Live Rocks I feed the fishes twice a day with Nutrafin flakes. Thanks,

The Red SeaBerlin Air-Lift Protein skimmer not working as per expectations. Please can you help advice a solution to this problem? · I had purchased and installed the Berlin Airlift 60 (240 litres) skimmer approx. 4 weeks ago. The skimmer is connected to a new EHEIM 3704 Air Pump which is 400 litres/hour. I have connected both the outlets of the airpump using a connector to the Red Sea wooden airstone which was supplied with the skimmer. My FOWLR Tank is 47.97 gallon and approximately 5 months old. · I have also kept the skimmer at the Water Level market indicated on the skiimer. · As you see in the pictures below, The skimmer just foams only white bubbles ocassionally in the collection cup and does not produce any dark skimmate. · The surface of the water is agitated using a 2 powerful powerheads and hence the water near the water level marker keeps fluctuating sue to the surface waves generated by the powerheads.

Many Thanks. So are you suggesting that I but a skimmer (air-driven) and the airstone used in the skimmer will be fine to oxygenate the water. In this case and I place the powerhead horizontally near the water surface (instead of pointing to top and causing exploding bubbles on the surface?)

Hi Friends, I have a 50 gallon saltwater tank with only few Fishes, 1 Carpet Anemone and Live Rock. The tank is powered by a EHEIM 2213 filter and a submersible AZOO 1200 litre/hr dual submersible filter pointed to the top of the tank just below the water surface.(http://www.azoo.com.tw/azoo_en/modules.php?name=Product_Review&bkid=208) Advice Required: 1. Is an airstone really required in the saltwater aquarium? or will the above arrangement with the AZOO powerhead be sufficient to provide adequate dissolved oxygen through surface agitation? 2. What is the best height to place the powerhead at the surface of the tank for good oxygen supply? Should it splash the water like a fountain or just create ripples? 3. Any other recommendation to provide good oxygen level and avoid having microbubbles throughout the tank Please advice. Thanks, Sanju