Jump to content

Fragging Xenia And Toadstool!


ASHWIN
 Share

Recommended Posts

  • SRC Member

Hi Guys I Have a huge toadstool and crazy growing xenia..

my question is can i frag it in the tank?..i cant take out both..tooo big and connected to other part of the rocks..

Any complications? I Have a Mix reef..

doing a water change after that ok?

Pls advise need to trim soon..toadstool is touching my birdsnest sps

xenia is growing on zoas

post-23186-0-91311500-1395733369_thumb.j

this is the Pink toad..

pls advice guys!

thanks,cheers!

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

I think its ok for your toadstool to touch your birdnest, shouldn't have much issue. Mine is touching too.

For xenia, if u have a scrapel or small penknife, u can try scrape it & peel it off from the base where its attached to the rock slowly in order not to damage it. If u can't remove it without hurting it then guess u have to destroy it.

Better to do at nite when its polyps all closed up.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

I think its ok for your toadstool to touch your birdnest, shouldn't have much issue. Mine is touching too.

For xenia, if u have a scrapel or small penknife, u can try scrape it & peel it off from the base where its attached to the rock slowly in order not to damage it. If u can't remove it without hurting it then guess u have to destroy it.

Better to do at nite when its polyps all closed up.

Toadstool Too big bro..So can be cut in tank?

Xenia i dont mind chooping it up..

Terrible crazy growing

In tank can be cut?..

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

Toadstool Too big bro..So can be cut in tank?

Xenia i dont mind chooping it up..

Terrible crazy growing

In tank can be cut?..

Can cut inside tank, I've tried before, but u need to off ur pumps & wm for awhile. I think its better to frag off ur birdnest than toadstool but it's up to u. Cos your toadstool big & nice.

Display Tank : 36" x 20" x 20" Herbie overflow box design, Sump : 36" x 21" x 17", Frag Tank : 16” x 20” x 16”, custom built by Tank Culture.

Lightings : Ecotech  Radion XR15 Pro x 2 for Main Display Tank, Inled R80 x 1 for Frag Tank.

Chiller : Dalkin 1hp compressor with build-in drop coil.

Skimmer : Skimz Octa SC205i Protein Skimmer.

FR : H2Ocean FMR75 Fluidised Media Reactor with Hailea HX-2500 (Feeder Pump) running Rowaphos.

CR : Skimz Monzter E Series CM122 Calcium Reactor.

BPR: Marine Source Biopellet  Reactor with Continuum Reef Biopellet Fuel. 

Main Return Pump : SICCE Syncra ADV 9.0 & Jebao ACQ-10000 Water Pump.

Wavemaker : Jebao MOW-9 x2 for Main Display Tank & Jebao SLW-20M  Sine Wave Pump for  Frag Tank.

Water Top Up: AutoAqua Smart ATO Lite.

Link to comment
Share on other sites

  • SRC Member

Can cut inside tank, I've tried before, but u need to off ur pumps & wm for awhile. I think its better to frag off ur birdnest than toadstool but it's up to u. Cos your toadstool big & nice.

No Prob Ah Bro? No complications?..My Birdsnest small colony only Leh Haha

il think about it..So xenia and toad no prob ah if cut inside the tank?? ..for precaution il change 30% Water after That..Just increase my 10% to 30%..

Thanks for your advice

cheers!

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

u can cut any soft coral easily with fragging tool (scissor) directly inside your tank include leather & xenia too but xenia is more difficult to stick it with glue gel on a plug or any rock the best way is put in a tupperware with low wave & wait it to stick itself just take 2~3 days ...

Link to comment
Share on other sites

  • SRC Member

u can cut any soft coral easily with fragging tool (scissor) directly inside your tank include leather & xenia too but xenia is more difficult to stick it with glue gel on a plug or any rock the best way is put in a tupperware with low wave & wait it to stick itself just take 2~3 days ...

Hahaha Thanks Bro Sengreef..Xenia i want to destroy liao..Crazy Growth..Toadstoll..Just Trimming.How will it heal?..So After Cut..The Cut Mainpart of the coral Will Open? No complications?..damn scared they will kill my sps..

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

You're right to be scared and want to protect the stony corals. The toadstool looks like sarcophyton, known to be very toxic against other corals even without stress. I would do the water change and beef up carbon. No problems with in-tank frag.

Link to comment
Share on other sites

  • SRC Member

You're right to be scared and want to protect the stony corals. The toadstool looks like sarcophyton, known to be very toxic against other corals even without stress. I would do the water change and beef up carbon. No problems with in-tank frag.

Ok Thanks for your advice!

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

Hahaha Thanks Bro Sengreef..Xenia i want to destroy liao..Crazy Growth..Toadstoll..Just Trimming.How will it heal?..So After Cut..The Cut Mainpart of the coral Will Open? No complications?..damn scared they will kill my sps..

its very hardy coral u can cut whatever size u wan & just stick with glue gel onto frag plug or any rock will do but some time u need to stick few time becos toadstoll changing skin very often so not easy to stick it too depends luck & timing but it will recover very fast nothing to worry about ...

Link to comment
Share on other sites

  • SRC Member

its very hardy coral u can cut whatever size u wan & just stick with glue gel onto frag plug or any rock will do but some time u need to stick few time becos toadstoll changing skin very often so not easy to stick it too depends luck & timing but it will recover very fast nothing to worry about ...

Thank You Bro SengReef

Appreciate It!

Cheers!

300Gallons of Pure Goodness! >Dimensions 6x2x2 (Foot)

1: Maxspect 160 Watt qty-2

2: Vortech MP 40 Wes

3:Jaebao WP40 qty-2

3: Skimz Becket Skimmer/ Ehiem 1260

4: Dymax XC 900 Calcium Reactor

5: American Pinpoint PH Controller

6: Iwaki MD 55 And MD 70 (Return)

7: Hydra Aquatics FR45 Reactor

8:Hailea 10HP Chiller

R2R forum->>>http://www.reef2reef.com/forums/photography-forum/154896-ashwins-reefing-photography.html

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      Wts red leg hermit crab

    2. 0

      英国伦敦大学学院毕业证*成绩单*文凭*留服认证Q微707091118购买UCL文凭学历学位认证,办理英国大学学历认证University College London

    3. 0

      英国帝国理工大学毕业证*成绩单*文凭*留服认证Q微707091118购买ICL文凭学历学位认证,办理英国大学学历认证Imperial College London

×
×
  • Create New...