Jump to content

Not getting kopi o with remora skimmer


odi
 Share

Recommended Posts

  • SRC Member

Water height should not be too much concern for Remora since its spray injection technique.

What's the flowrate of the 4000 weipro pump?

Try adjusting the black rubber band on the collection cup to drier or watery skimate. Tha lower the rubber band, the higher the cup goes = drier skimate.

Cheers

JC

Link to comment
Share on other sites

  • SRC Member
Water height should not be too much concern for Remora since its spray injection technique.

What's the flowrate of the 4000 weipro pump?

Try adjusting the black rubber band on the collection cup to drier or watery skimate. Tha lower the rubber band, the higher the cup goes = drier skimate.

Cheers

JC

Pump rated 2900l/hr.

Link to comment
Share on other sites

think ur pump used is overrated for the remora. check out eaquanature for the recommended pump. i think should be the sicce idra, flowrate is abt 1300L/Hr. I hv ever make enquiries to Edmund on the pump used. Edmund told me that using a overrated pump might not give u the best results.

Austin the Westie: "I may be your best friend, but you are my everything".

Lightning Strike's Back!!!

Reefkeeping Is Not My Hobby, It's My Obsession.

Austin's Birthday

.png

Link to comment
Share on other sites

  • SRC Member
think ur pump used is overrated for the remora. check out eaquanature for the recommended pump. i think should be the sicce idra, flowrate is abt 1300L/Hr. I hv ever make enquiries to Edmund on the pump used. Edmund told me that using a overrated pump might not give u the best results.

Edmund, any advise? i can adjust the flow of the pump but need a guide on the optimum water level.

Thanx.

Link to comment
Share on other sites

  • SRC Member

I've ever wrote in to Aquac on some technical issues and was told that Extrema can be used with Remora Pro. Not sure if Remora is ok tot. Maybe you want to ask your friend to write in to check with them. Their email is available on their website.

Cheers

JC

Link to comment
Share on other sites

  • Sponsor

Extrema is way ovverated for Remora. For Remora, either use Maxijet 1200 or IDRA.

Drier skimmate can be derived by following jc85's answer in respect of cup adjustment.

I'm not sure what water level has to do with Remora here as it is totally independent from the tank water height. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...