selling Aquamedic sulphur de-nitrator

[acontia]

hi aLL

selling 02 units sulphur de-nitrator. brand is Aquamedic ( same as the CR400 body ), comes with full media (new) including hydro carbonate (Ca carbonate). this unit is able to handle at least a 4ft tank..\

1st unit 9/10 condition. $280

2nd unit 7/10 due to repairs to the input which broke. it is working perfect with no problems. $240

also 01 unit german UV-C UV sterilizer 18watts. uv tubes 3mths old. decom 1year ago due to installation of O3. $180

01 set Tunze turbelle classic wave maker with controller = 2 x 2002 + 1 x 708 controller. $550 (bearings and some internal parts are new, cost $100 to replace them both)

will post pic when have time

[sharkfin]

hw old is e denitrator?

[acontia]

been with me for 2yrs. used for 1yr. don't think it makes a big differents, no COE lei. age does not change it's performance unless used for 6-8 yrs then perhaps need to be concern with pumps impellers or media quality.

[vagabond]

also 01 unit german UV-C UV sterilizer 18watts. uv tubes 3mths old. decom 1year ago due to installation of O3. $180

Specs for this unit please.

[acontia]

here are some of the pics

this is the unit with the repair.

[acontia]

both units

sulphur media not in yet.

[acontia]

both close up

[acontia]

this unit ran for 3 mths and was decom, but lazy to unhook just left it running without the uv lights on. i will do some cleaning b4 handover.

18 watts UV

[acontia]

tunze classic wave maker. this unit has almost 0% heat trasfer into tank as pumps/motors are mounted on the surface, only impellers are inside water. good for NaNo tanks. both unit have a combind flow of 4800L/H varible output. 20%-100% both channels.

[acontia]

another view

oh ya, comes with photocell for night mode.

[acontia]

^^

[acontia]

price revised

1st unit 9/10 condition. $240

2nd unit 7/10 due to repairs to the input which broke. it is working perfect with no problems. $200

also 01 unit german UV-C UV sterilizer 18watts. uv tubes 3mths old. decom 1year ago due to installation of O3. $140

[acontia]

upz

[acontia]

upzzzz

[acontia]

upz

[acontia]

upzz

[acontia]

upzz

[acontia]

upzz

[acontia]

give me a reasonable offer.

[acontia]

tunze classic wave maker. this unit has almost 0% heat trasfer into tank as pumps/motors are mounted on the surface, only impellers are inside water. good for NaNo tanks. both unit have a combind flow of 4800L/H varible output. 20%-100% both channels.

price revised.

$500/-

[acontia]

01 set Tunze turbelle classic wave maker with controller = 2 x 2002 + 1 x 708 controller. $550 (bearings and some internal parts are new, cost $100 to replace them both)

price revised. $500/-

also 01 unit german UV-C UV sterilizer 18watts. uv tubes 3mths old. decom 1year ago due to installation of O3. $140 (now $120)

[acontia]

upxx

[acontia]

upxxx

[acontia]

wah, bo seng lee lei.

upz