Jump to content

WTS Pump MD 40 (external)


Recommended Posts

  • SRC Member

cannot be used internally but cannot run pump dry?

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

  • SRC Member

That means do not turn on the pump unless it is connected to the water and the water level is higher than the pump. I.e. place the pump at ground level, not higher than your water level or it will suck air and then burn out.

Be aware that MD-40 cannot be submerged into water.

Be teachable always, nobody has a monopoly on wisdom. But learn to distinguish "fact" from "opinion".

Link to comment
Share on other sites

That means do not turn on the pump unless it is connected to the water and the water level is higher than the pump. I.e. place the pump at ground level, not higher than your water level or it will suck air and then burn out.

Be aware that MD-40 cannot be submerged into water.

Thks bro Xperiment and Darryl85 for explaination.

Link to comment
Share on other sites

  • SRC Member

if without sump can draw water from overflow and pump back water?

Project R.E.

Main Tank: 48" x 18" x 24" 12mm with external overflow piping

Sump Tank: 28" x 14.5" x 12" (3 compartments)

Lightings: T5 HO - Hopar 3* 39w + ATI 2* 54w

Skimmer: Skimz Bullet Beckett

Chiller: Resun CL-650 (28 - 29 °C)

Wavemakers: 2* Seio M620 + 1* Hydor K2 (7100 litre / hr)

Fluidized Reactor: Skimz FR (currently empty)

Pumps: 1x Rio 32HF (Skimmer), 1x Rio 20HF (Return & Chiller)

Filtration: more than 80kg LRs, chaeto

Water Circulation: ~ 4000 litre / hr

Future Plans: additional wavemaker, DIY algae scrubber, DIY overflow box

Previously:

Project R : 36" x 12" x 24" 10mm reef

Link to comment
Share on other sites

if without sump can draw water from overflow and pump back water?

I think not possible, unless u r able to place the pump at ground level(externally) and connect to the water and the water level is higher than the pump.

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...