calcium reactor set up

[mojojo]

calcium reactor set up

guys i need help setting up my calcium reactor , ph controller, and co2 tank.

did i set it up right?

A. water coming to the pump

B. water coming out to the sump

C. c02

D. water coming out

E . c02 inlet to the ph controller to the ca reactor.

addtional info.

pH/CO2 controller set

(7074/2)

c02 tank

korallin reacor

[Solo77]

hi bro, didnt use a koralin before so cant comment much especially when i see lots of tubes around. Anyway, the solonoid is suppose to cut or resume CO2 supply to your CR. There is a bubble counter in your pic, so that one should be used after the solenoid. The pH probe as shown in your CR is used to monitor your pH level in the CR and it will give signal to your pH controller to switch on or off the solenoid valve. Hence, the solenoid power should tap from the power socket supplied by the pH controller. There is a tube like structure, not sure whether this is the secondary chamber. You will have a water input tube(need a feeder pump to supply water to the CR) and and output tube to allow dosing the CR water into your sump. Just my limited knowledge. Please take as reference as it is subject to correction. All the best.