SRC Member kimwailee Posted June 1, 2009 SRC Member Share Posted June 1, 2009 Hi Bro and Sis... Any kind soul here can advice me on the Vortech MP40Gen 2 ? Is there a different between Lagoon and Reef mode compare constant Speed (Green)? When I select above, (Lagoon or Reef) I could not feel the pulse and it just go constant speed, expecially when I select Lagoon mode.. I can set the pulse mode when go into "blue" light.. Is this normal ? Many Thanks. Quote Link to comment Share on other sites More sharing options...
m12345y Posted June 2, 2009 Share Posted June 2, 2009 i set to the short pulse mode/blue, after saving, the light is alternating blue and green. just choose a max speed and then tuning the pulse freq. i used to have lagoon/purple mode, but feel it too strong or too weak, and then given up on further tuning it....but the output does seem random as i gauge from the goniopora movement Quote Link to comment Share on other sites More sharing options...
dolphbox Posted June 2, 2009 Share Posted June 2, 2009 hijack the thread for a question. For a 4fx2ftx2ft tank. using 2 mp40 pump, will the flow be too much? Quote Link to comment Share on other sites More sharing options...
Solo77 Posted June 3, 2009 Share Posted June 3, 2009 there are controllable.....depending on what you keepp...full sps...i think good...for lps....may pose a problem but if you reduce the flow, may not be that bad. try one and if you think no enough...then go for second one.... Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
dolphbox Posted June 3, 2009 Share Posted June 3, 2009 there are controllable.....depending on what you keepp...full sps...i think good...for lps....may pose a problem but if you reduce the flow, may not be that bad. try one and if you think no enough...then go for second one.... I already got two.. I dun keep SPS. only got anemoes, 1 greenstar polys, 1 xenia. that all live stock = 1 pair clown, 2 dart fish, 1 benny. I not sure is tow is too much flow.. if it is.. i gng to sell one off Quote Link to comment Share on other sites More sharing options...
Jameshong Posted June 3, 2009 Share Posted June 3, 2009 I already got two.. I dun keep SPS. only got anemoes, 1 greenstar polys, 1 xenia. that all live stock = 1 pair clown, 2 dart fish, 1 benny. I not sure is tow is too much flow.. if it is.. i gng to sell one off PM me if you want to sell ! Quote Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe Link to comment Share on other sites More sharing options...
Solo77 Posted June 3, 2009 Share Posted June 3, 2009 bro, try different placement to achieve wavebox effect. For anemoes, they dont like wave......GSP and xenia still ok.....not too many corals...hence still ok to use both...once you put in more other LPS and if you encounter problem...you may have to sacrifice one.....if you selling....can also inform me....lol. I already got two.. I dun keep SPS. only got anemoes, 1 greenstar polys, 1 xenia. that all live stock = 1 pair clown, 2 dart fish, 1 benny. I not sure is tow is too much flow.. if it is.. i gng to sell one off Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
SRC Member kimwailee Posted June 3, 2009 Author SRC Member Share Posted June 3, 2009 wah.... become pasar malam here lar.... never mine,,, hope can have more advice,,, Quote Link to comment Share on other sites More sharing options...
Solo77 Posted June 3, 2009 Share Posted June 3, 2009 bro, call victor up to ask him..if he cannot answer...ask for refund.....lol. Quote Tank : 4 X 2 X 2 with low iron front panel and external overflow Skimmer : BK SM200 with waste collector Return Pumps : Red Dragon 6m3 and Ehiem 1262 FR : 2 X Deltec 509 & powered by AB2000 Nitrate Filter : Deltec NF 509 and tee off from AB2000 Calcium R'tor : Deltec PF 501 with RM secondary chamber Kalkwasser R'tor : Deltec KM500 Chiller : Pansonic 1 HP Compressor with 20m titanium Coil Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w Controller : GHL Profilux Lighting : ATI Powermodule 10 or 8 tubes Water Top-up : Water Top-Up tank powered by Tunze Osmolator External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox Ozonizer : Sander C50 UV : Corallife 6x Algae Scrubbler Link to comment Share on other sites More sharing options...
dolphbox Posted June 3, 2009 Share Posted June 3, 2009 actually i am very impress with the mp40.. Just with one, i am able to create the wave effect in my 422 tank... till now i am lazy to put another to use.. hehehe when weekend, then i go try to use another.. cos i can't place other 1 at the opp end, as mine tank is partition tank(block by a wood) I thought anemone will like wave? i not very sure... Quote Link to comment Share on other sites More sharing options...
thxwong Posted June 5, 2009 Share Posted June 5, 2009 any one know VorTech MP40 where to buy ah? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.