Jump to content

My 1.5 ft Reef log


jackywongto
 Share

Recommended Posts

  • SRC Member
yeah, hope so. Actually I cannot see the nudis. I can see other worms, large pods swimming out and struggling. Will do another round of dip later in the week before I return them into the tank.

ok, just keep on shaking em well, hopefully eggs fall off as well. yeah large pods and even a brittle star also fell. should be ok, for me 10-15 mins soak seems to have worked effectively already.

25 Gal Micro Ocean

Link to comment
Share on other sites

  • SRC Member
yeah, hope so. Actually I cannot see the nudis. I can see other worms, large pods swimming out and struggling. Will do another round of dip later in the week before I return them into the tank.

What you can do is to increase the concentration of the RX Pro dip. I used double concentration for 10 mins and a lot of critters came out from the zoas I dipped them in. Some snails, slugs, pods, brine shrimps etc but didn't see any nudis though.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
ok, just keep on shaking em well, hopefully eggs fall off as well. yeah large pods and even a brittle star also fell. should be ok, for me 10-15 mins soak seems to have worked effectively already.

So u finished ur Coral RX Pro already??? :eyebrow::whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
lol i used about 8-9 drops for a ice cream tub.dipped all new zoas inside.

poo bro so fast finsih meh, unless he pour all inside his own tank :upsidedown:

tats what I told Jacky previously. Pour all inside his tank and let the corals soak for 15 mins, then take out and wash in toyogo tub. 1 shot everything dipped... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member

lol $$$ can.. hahaha

what chief do is what i will do.. haha . dipped multiple times. i think more effective.. the critter sure tak boleh tahan all up lorry ..

chief is strong, break down tank and scrub.. :bow:

Link to comment
Share on other sites

tats what I told Jacky previously. Pour all inside his tank and let the corals soak for 15 mins, then take out and wash in toyogo tub. 1 shot everything dipped... :eyebrow:

too bad I am not tycoonuat like u, else I would do it that way :)

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
too bad I am not tycoonuat like u, else I would do it that way :)

I think u would if you could get the Coral RX at a much cheaper price... :eyebrow::whistle

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

I think u would if you could get the Coral RX at a much cheaper price... :eyebrow::whistle

More than 30% disc already still not cheap arh?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
gentle reminder i think this one mostly for mushy and zoas.. lol if got other corals sure :whistle :whistle :whistle :whistle (correct me if i am wrong, else i can dipped the GSP inside too when i migrate)

All corals can leh...Because it does not have iodine in it thus, you can dip all corals in it.

Anyway, copied from coralrx website:

Coral Rx can be used in treating many types of live corals; soft, LPS and SPS. Coral Rx should be used in treating corals that have parasites or other bacterial infections. Additionally, it should be used as a prophylactic treatment before bringing live coral into your aquarium.

Coral Rx is effective in removing the following parasites:

- Acropora Eating Flatworms (AEFW)

- Montipora Eating Nudibranchs

- Bristleworms

- Zoanthid Eating Spiders

- Red Flatworms

Also aids in the treatment of:

- Filamentous Hair Algae

- Rapid Tissue Necrosis (RTN)

- Slow Tissue Necrosis (STN)

- Bacterial Infections & More

Coral Rx should not be used on fish, shrimp, crabs, snails, clams or other invertebrates. We have not tested CoralRx's effectiveness on Acropora Red Bugs.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
will be getting this too....a must-have!

U mean the fish or coralrx??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

lol $$$ can.. hahaha

what chief do is what i will do.. haha . dipped multiple times. i think more effective.. the critter sure tak boleh tahan all up lorry ..

chief is strong, break down tank and scrub.. :bow:

Yah I think multiple times over 1-2 weeks should be more safe & effective rather than stronger dose.

Btw Onizuka , u are following a noob person hor lol.

Superbackache today. Cannotwalk straight. But the sight of a clean tank makes it all worth while. A lot of thoughts jumped thru my mind last night.

I started this tank with the intention of keeping it simple but in the midst of all the "frag" race, I have clouded my vision. Thought that my eqpt is not adequate where in fact , I might have greatly overstocked my tank. Totally lost track of the KISS principle. Now still very confused and entertaining conflicting thoughts. Should I get a mce 600? I am totally wrecked.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
:eyebrow:

This is Coral RX original. Get the RX Pro or RX Industrial one better lah... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

What you can do is to increase the concentration of the RX Pro dip. I used double concentration for 10 mins and a lot of critters came out from the zoas I dipped them in. Some snails, slugs, pods, brine shrimps etc but didn't see any nudis though.

nudis curled up when stressed. So u might not have noticed them. It is just like a speckle of dirt.

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
Yah I think multiple times over 1-2 weeks should be more safe & effective rather than stronger dose.

Btw Onizuka , u are following a noob person hor lol.

Superbackache today. Cannotwalk straight. But the sight of a clean tank makes it all worth while. A lot of thoughts jumped thru my mind last night.

I started this tank with the intention of keeping it simple but in the midst of all the "frag" race, I have clouded my vision. Thought that my eqpt is not adequate where in fact , I might have greatly overstocked my tank. Totally lost track of the KISS principle. Now still very confused and entertaining conflicting thoughts. Should I get a mce 600? I am totally wrecked.

Wah...U walking like crab tdy huh??? :eyebrow::whistle

MCE600 is good but are you going to keep many fishes? If mainly corals and a few small fishes, then MCE300 or your current Tunze would be sufficient. Even the Red Sea prizm would be good enough.

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
nudis curled up when stressed. So u might not have noticed them. It is just like a speckle of dirt.

Yup saw many many speckles of dirt at the bottom of my pail... :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

gentle reminder i think this one mostly for mushy and zoas.. lol if got other corals sure :whistle :whistle :whistle :whistle (correct me if i am wrong, else i can dipped the GSP inside too when i migrate)

I dipped all my corals yesterday incl rics, yumas, Gsp, coco worms, blastos. Seemed ok

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

  • SRC Member
I dipped all my corals yesterday incl rics, yumas, Gsp, coco worms, blastos. Seemed ok

I think I will be finishing my current bottle very soon... :eyebrow:

Now the big question is...Should I get the 8 oz CoralRx Industrial??? :eyebrow:

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

  • SRC Member
I think I will be finishing my current bottle very soon... :eyebrow:

Now the big question is...Should I get the 8 oz CoralRx Industrial??? :eyebrow:

wah you damn deep pocket.. LOL if you get 8 oz, let me know the price haha. my 1 oz bottle just dropped 8 drips as of the day i got from chief

Link to comment
Share on other sites

Wah...U walking like crab tdy huh??? :eyebrow::whistle

MCE600 is good but are you going to keep many fishes? If mainly corals and a few small fishes, then MCE300 or your current Tunze would be sufficient. Even the Red Sea prizm would be good enough.

My girl wants more fishes. But just thinking if the water will be too turbulent on my cube. Is the mce ok for your 2 ft? Any microbubbles Leak back into the tank?

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




  • Join us on the largest Reefing community in Asia!

    Sign up and share your reefing journey with us, make friends and get helps from the community .

     

  • Topics

  • Latest Update

    1. 0

      WIZARD WEB RECOVERY A LEADING EXPERT IN LOST CRYPTO RECOVERY

    2. 1

      HOW TO RECOVER LOST OR STOLEN CRYPTOCURRENCY / GRAYHATHACKS CONTRACTOR

    3. 1

      HOW TO RECOVER LOST OR STOLEN CRYPTOCURRENCY / GRAYHATHACKS CONTRACTOR

    4. 1

      CRYPTO FRAUD AND ASSET RECOVERY_HACKATHON TECH SOLUTION

    5. 0

      Wts gd size 3inch black tang

×
×
  • Create New...