firestream

found the drawing .... post for reference . mods, if it is against the posting rule, please remove it for me.

just need the drawing ...

the page was pull down from RC .. anyone have a copy ?

in fact, the idea will be skimmer at the first, refuge at 2nd, return pump/chiller pump at the last

method 4 will be idea ... increase your overall water flowrate too.

use the orignal needle wheel lah .. or buy the needle wheel from state or DIY one ...

it depend how you position your router. Put it high up will help .. cause less furniture , etc. Mine router is actually in the last room upstair, yet still be able to receive good signal in the living room. Travel pass 3~4 walls also ... this mean it is not a signal problem ...

hello ... 15m is not too far ok. mine was at least 30m away and I can still get quite a good signal from the router. It was the windows Xp control fault. Do a search on the net ....

the randomly disconnect issue is cause by the Windows wireless control ... go to control panel > Administrative Tools> services , and shut off the "Wireless Zero Configuration" once you connected to your wireless router. You will need to start the service again to search for a new connection. or , Use those wireless tools provide by Linksys or Intel, depending on the brand that you used for your pc

u can get RIO pump .. either 2100 or 2700 depend your marco skimmer model. What model are you using ?

just wondering how's the effect gonna be for the mangrove and other plant in the sump ?

for those that with problem with the gf/wife, please go and read the book "Men Are from Mars, Women Are from Venus: A Practical Guide for Improving Communication and Getting What You Want in Your Relationships" It help you understand how your gf/wife feel. They might not really complaint about you pay much attention to the tank but something else ... best of all, ask them to read that book also ..

please let me know if the buyer back off ..

now in KL too Hometown JB ..

Which part of Malaysia are you from ?

yes .. it will work .

yup ... ok .. $10 .. thank !

may I know how much you pay for the magnets stirrer ?

did you use any water conditional ? maybe cause by that ?

1. Try to change the placement of the chiller .. more toward the windows or windy area. Don't ever place the chiller in the cabinet unless you hv good airflow. 2. Increase the water flowrate. 1200l/p is not enought. Best ~ 2000l/p 3. If possible, place the return water from the chiller back to the tank. I'm running a CL-300 on 300L tank with 250W MH + 2 T5 it still can cool it down to 27'c

get the 7200rpm with 8MB cache with IDE will do the job. 99% of PC that manufacturer last year wasn't come with a SATA interface.

go to storage Studio .. 4th floor, back lane ... they are the distributor .. often the lowest in price as well for Hitachi/IBM hdd.

if you have norton ghost .. you can copy the existing data to the new drive and all your data will be the same. Dont need to re-install Windows

agree ! You just need regular cleaning for the bioball & coral chips if you intend to keep it.

but if I put the cucumber into the tank with coral chips ... will it be a problem ?