Jump to content

WTS: Inkbird ITC-308 Digital Temperature Controller (Chiller/Heater)


Junwei
 Share

Recommended Posts

  • SRC Member

WTS the following item, used for a month only then kept in storage. Very effective aquarium chiller and heater controller! Shipped from Amazon UK, it is the #1 best seller controller on Amazon.

Condition still good as new. Only bought recently. Selling for SGD $70. Whatsapp me at 9760 5838 to deal. YCK area.

https://www.amazon.com/Inkbird-Itc-308-Temperature-Controller-Thermostat/dp/B01MDSWXY4/ref=sr_1_3?ie=UTF8&qid=1498467227&sr=8-3&keywords=inkbird

Main features: 
Plug and play design, easy to use; 
Dual relay output, be able to connect with refrigeration and heating equipment at the same time; 
Support reading with Centigrade or Fahrenheit unit; 
Maximum output load: 1100W(110V); 
Dual display window, be able to display measured temperature and set temperature at the same time; 
Temperature calibration; 
Compressor delay protection for refrigeration control 
High and low temperature alarms are available; 
Over-temperature and sensor fault alarm 
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. 

Specification: 
Temperature control range -50 ~ 99 ° C / -58 ~ 210 ° F 
Temperature resolution 0.1 ° C / 0.1 ° F 
Temperature accuracy of ± 1 ° C (-50 ~ 70 ° C) / ± 1 ° F (-50 to 160 ° F) 
Temperature Control mode on / off control, heating and cooling 
Input 100 ~ 240VAC, 50Hz / 60Hz 
Temperature Control output max. 10A, 100V ~ 240V AC 
Alarm high and low temperature alarm 
Sensor Type NTC Sensor (including) 
Sensor length 2m / 6.56ft 
Relay contact capacity cooling (10A, 100-240VAC) 
Heating (10A, 100-240VAC) 
Input power cable length 1.5 m (5 ft) 
Output Power cable length 30 cm (1 ft) 
Dimension body: 140x68x33mm (5.5x2.7x1.3inch) 
Socket: 85x42x24mm (3.3x1.7x1inch) 
Ambient temperature -30 ~ 75 ° C / -22 ~ 167 ° F 
Storage temperature -20 ~ 60 ° C / -4 ~ 140 ° F 
Humidity 20 ~ 85% 

1.jpg

2.jpg

3.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...