Jump to content

H&S Sulphur/Nitrate Filter 110-F1000


Melvyn Tan
 Share

Recommended Posts

  • SRC Member

h2S a very deadly gas..

if any engineers here who have to obtain basic SOC for shipyard, chemical & petrolium and construction will be given this piece of warning..

I am just an average FR (fish reefing) writer. If you like my FRs, please upz my points.

Link to comment
Share on other sites

  • SRC Member

Good to use the strainer, i use the strainer.

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

Will all the water in the sulphur chamber back flow into the sump when there is a power failure and cause the chemistry in the tank to change?

If it does how do one prevent it?

Link to comment
Share on other sites

  • SRC Member
Hmmm... dun kno how a few sulphur pallets ended up in my my tank. Tat stupid emperor tot round pallet thingy = fish food & happily swallow a few...gosh :sick::ph34r:

Hope he dun LS or gana poison the next day :pinch:

how your fishie?? turning yellow...

I am just an average FR (fish reefing) writer. If you like my FRs, please upz my points.

Link to comment
Share on other sites

  • SRC Member
Will all the water in the sulphur chamber back flow into the sump when there is a power failure and cause the chemistry in the tank to change?

If it does how do one prevent it?

Use the one way flow device (forgotten the name)

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

Yes, one way check valve

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

I smile to myself everytime i get 0ppm from the unit :D (taken today)

post-14-1132656165.jpg

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

Its in the 10ppm zone.

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

cheers bro!

i always get the contrary ...

sobz sobz :cry2::cry2::cry2:

Is your denitrification unit sulphur based? how long have you been running it?

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

Is your denitrification unit sulphur based? how long have you been running it?

now reading and going through this thread...

might be getting 1 unit from HK in late Dec liao...

Bro MarV, looks like your beads are on the way! my christmas present to you la! hahahhaha merry christmas !

post-304-1148825424.gifmadboy.gifmadboy.gifmadboy.gif

That just because someone doesn’t love you the way you want them to,

doesn’t mean they don’t love you with all they have.

Link to comment
Share on other sites

  • 2 weeks later...
  • SRC Member

My sulphur filter is now dripping at about 4-5 drops per sec and i took a measurement about last week and it measures 5ppm of nitrate. It is working hard to remove the nitrates produced by my big angels and fishes.

I have a big colony od sps (acropora) procured about 1 month ago (brown with slight green tint) to date it has the green tint almost throughout the branches. The dead exposed skeleton area are all almost rejuvenated by the living tissues. So although not conclusive, but indicative that the sulphur filter is doing its good work and seems beneficial to the coral.

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • 3 months later...
  • SRC Member

Some updates, tank nitrate is reduced to 2.5ppm, measurement taken a few days back.

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

The sulphur will be consummed in the process of denitrification, so periodically will mean 1 year or more. So far have been several months and the media is almost as it is, roughly maybe about 5% used?

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

  • SRC Member

Wah !!! i did no such measurement but was told that it does that function as well - not sure of the theory behind the removal though...

But it is a good thing ! Thanks alois for sharing...

My Beautiful ANGEL - Matsushima Nanako

Equipment List for 4x2x2 Tank & 3x1.5x1.5 Sump

Hagen 802 x 2, Tunze 6060, Arcadia T5 (54W x 8), Eheim 1260 (return) Eheim 1250 (Chiller), Aquabee 300 x 2 (Feed)

H&S 150-F2001 (850l Skimmer), H&S A110-F2000 (400l Skimmer), H&S 110-F1000 (1000l Sulphur/Nitrate Filter), H&S 150-F2000IA (800l Calcium Reactor)

Coralife 3X (UV Steriliser), I-Aquatic IF 312 (Fluidised Reactor), Kent Kalk Delivery, Resun CL650, Pinpoint ORP & PH Meters & Wireless Thermometer

4x2x2 Tank Thread

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...