Koralia 4 - Wavemaker Pump 4600L/h

[raymus]

any bro try out before on any koralia 1,2,3 or 4 ?

thinking of getting a Koralia 4 which is 4600 L/h to replace my serio 1100.

anyone knows serio 1100 flow rate and Wattage ? if as compare to Koralia 4 ?

current tank is 3ft x 1.5 x 2.5.

intend to run one serio 1100 and another Koralia 4 in my tank.

any comments? tks.......

[sherman]

There is a label on the top of your Seio.

It show your the wattage and the flow rate

Check it

[kominato]

21W, 4400 lit/hr I think

[iceman]

Y not consider the Tunze Nano 6045. The price is about the same and flow rate is 4500l/h and it consume only 8w. And the shape look nicer also.

[jervismun]

any bro try out before on any koralia 1,2,3 or 4 ?

thinking of getting a Koralia 4 which is 4600 L/h to replace my serio 1100.

anyone knows serio 1100 flow rate and Wattage ? if as compare to Koralia 4 ?

current tank is 3ft x 1.5 x 2.5.

intend to run one serio 1100 and another Koralia 4 in my tank.

any comments? tks.......

Hi bro

I am currently using Hydor Koralia 1, 2 and Nano Koralia. Been running both 1 and 2 since it was launched many months back.

Here's a comparison between Koralia 2 and Tunze 6045 (as recommended by bro Iceman)

Hydor Koralia 4

4600l/hr

11W

$138.00

Tunze 6045

4500l/hr

8W

$158.00

[Salty_Creature]

I've been told by John from AM. Hydor Koralia pump flow is wider than those Tunze pump (some ppl modify it and cut the impeller cover to get the wider flow). If the flow is narrow and too strong, the coral which get the direct flow may have danger of tissue rip off.

[LaW]

there are 2 K4 running in my tank.

the flow is wide and gentle. no complain from me.

if your tank is 3ft x 1.5 x 2.5 and wanted to run with ur exsiting seio1100, you might want to consider smaller model like the K3.

[gny]

Seio M1100 is rated at 1100gph/4400lph at 13W.

Agreed with LaW, use lower rated pumps for a 3ft tank.

M1100 or K4 is too strong...

I'm using M1100 for my 5ft tank.

[wlchew]

any bro try out before on any koralia 1,2,3 or 4 ?

thinking of getting a Koralia 4 which is 4600 L/h to replace my serio 1100.

anyone knows serio 1100 flow rate and Wattage ? if as compare to Koralia 4 ?

current tank is 3ft x 1.5 x 2.5.

intend to run one serio 1100 and another Koralia 4 in my tank.

any comments? tks.......

I am using both Koralia 4 and Tunze 6045 in my tank..

Wide-flow = K4 (can turn up to 60~70-deg only but since it is wide-flow..it is fine)

Strong-flow = Tunze 6045 (can turn 90-deg ...you can "aim" at certain angle)

If you look for Wide, then K4 else 6045 serve the same current-flow with slick "designer-look"..

[raymus]

WAH....so many reply and info...thanks all bro.

thinking of getting tunze 6060..but will it too strong?

or maybe just get K4 will be good enough?

well. if k4 as compare to serio 1100 no different, then no pt. in getting.

im getting something wider flow and maybe slightly stronger flow rate compare to serio 1100. slightly ...

so to conclude k4 or tunze 6060? or just remain as serio 1100 if no different btw k4 and serio 1100

[wlchew]

WAH....so many reply and info...thanks all bro.

thinking of getting tunze 6060..but will it too strong?

or maybe just get K4 will be good enough?

well. if k4 as compare to serio 1100 no different, then no pt. in getting.

im getting something wider flow and maybe slightly stronger flow rate compare to serio 1100. slightly ...

so to conclude k4 or tunze 6060? or just remain as serio 1100 if no different btw k4 and serio 1100

I think 6060 will be too strong for most LPS..

K4 is definitely a better buy than SEIO 1100..

K4 or 6045? depends on your application.. I feel that K4 Wide-flow is "softer" compare to SEIO or Tunze which is better for coral in "close/near" distance. (My K4 was recommended by John,AM when deciding on K3 or K4 to buy )..

You won't go wrong with either one..

[KenYeo]

I used SEIO 4400 before I changed to Tunze 6000 and 6055.

I feel that the actual flow rate of Taiwan and China products claim may not be the same compared to US and Germany products especially after running them for 6 months or more.

Tunze 6060 should be too strong for your tank, the adjustment of horizontal angle is quite limited and the vertical (up/down) angle is fixed. Tunze 6045 may be a better choice in term of its size, flow rate and resell value compared to k4 in my opinion...

[kareen]

I am using both Koralia 4 and Tunze 6045 in my tank..

Wide-flow = K4 (can turn up to 60~70-deg only but since it is wide-flow..it is fine)

Strong-flow = Tunze 6045 (can turn 90-deg ...you can "aim" at certain angle)

If you look for Wide, then K4 else 6045 serve the same current-flow with slick "designer-look"..

Wide-flow = K4 (can turn up to 60~70-deg only but since it is wide-flow..it is fine)

Strong-flow = Tunze 6045 (can turn 90-deg ...you can "aim" at certain angle)

Any kind bros care to explain this a little more? I'm unable to comprehen the message leh....

I'm still deciding which to get? Is the above suitable for 4 by 2 by 2 footer of mainly LPS?

[Ah-lim]

No more k3 and k4 at jlky AM.

Bought the 4.

[kareen]

No more k3 and k4 at jlky AM.

Bought the 4.

Oh... so out of stock for now? That's okay....'cos I believe there will be new stock coming, right?

However, why do you need 4? I think I read that these are not sutiable to hook up with wave controller.... Its will spoil easily by doing so.

[Ah-lim]

Oh... so out of stock for now? That's okay....'cos I believe there will be new stock coming, right?

However, why do you need 4? I think I read that these are not sutiable to hook up with wave controller.... Its will spoil easily by doing so.

I mean i bought the K4, not 4, oppps.

Yup, they are not supported by pulser, etc..

Think nxt mth coming in more.

Happy man, I like the broad flow.