Jump to content

WTS 2ft Cube Tank


Solo77
 Share

Recommended Posts

Hi, will be decomming my 2ft cube tank in 2 to 4 weeks time. The tank will come with MH(can't remember whether it is 150 or 250), DIY T5(2 tubes to 4 tubes), 2ft cube, piping(durso pipe), sump, cabinet, return pump(ehiem, dont know whether it is 1260 or 1262) and a pump for FR(atman i think). I do have a H & S skimmer(in sump for 850l type) and will let go if price is right, if too low, i will be keeping it as spare as i like its performance. Condition of the tank is about 7 to 8/10(depending on your expectation) as there are scratches. Tank should be 3 yrs old and using 10mm glass. Pm me if interested. Thanks for viewing.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member

Pm send bro :upsidedown:

Pain is temporary. It may last a minute, or an hour, or a day, or a year, but eventually it will subside and something else will take its place. If I quit, however, it lasts forever.


Member of:
www.marineaquarist.sg

Link to comment
Share on other sites

  • SRC Member
Hi, will be decomming my 2ft cube tank in 2 to 4 weeks time. The tank will come with MH(can't remember whether it is 150 or 250), DIY T5(2 tubes to 4 tubes), 2ft cube, piping(durso pipe), sump, cabinet, return pump(ehiem, dont know whether it is 1260 or 1262) and a pump for FR(atman i think). I do have a H & S skimmer(in sump for 850l type) and will let go if price is right, if too low, i will be keeping it as spare as i like its performance. Condition of the tank is about 7 to 8/10(depending on your expectation) as there are scratches. Tank should be 3 yrs old and using 10mm glass. Pm me if interested. Thanks for viewing.

Hi bro....

Any pictures?

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

Thks for those who pmed. Will upload the pic soon.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Here are the photos, sorry for the blurness. I reserve the rights to sell to whoever i deem sincere. I am looking around $200 for all. Hope it is reasonable. No reservation until viewing is done, unless buyer willing to put deposit without any viewing(hope buyer will view to avoid unnecessary misunderstanding). Will be rather busy due to house cleaning, etc. Hence, arrangement of viewing will be at my convenience(got dog and baby, hence can't be too late(below 9 pm)). Got Live sand, dead sand, live rocks and dead rocks can be given FOC for scaping purpose. Should have more than enough as i will be decomm all my QT tank and transfer them to my new tank. Thanks for viewing.

post-14019-1257860923_thumb.jpg

post-14019-1257860935_thumb.jpg

post-14019-1257860949_thumb.jpg

post-14019-1257860967_thumb.jpg

post-14019-1257860978_thumb.jpg

post-14019-1257860994_thumb.jpg

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

$200 for the following items; MH(can't remember whether it is 150 or 250), DIY T5(2 tubes to 4 tubes), 2ft cube, piping(durso pipe), sump, cabinet, return pump(ehiem, dont know whether it is 1260 or 1262) and a pump for FR(atman i think). I do have 2 tubes DE lighting, 4 tubes AM retrofit lighting and solite 2 tube lighting. Can package in if you want to go full T5. Also got quite a number of ben timers, if buyer is interested and maybe other items which i gathered for my new tank setup. Thanks for viewing.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member
Here are the photos, sorry for the blurness. I reserve the rights to sell to whoever i deem sincere. I am looking around $200 for all. Hope it is reasonable. No reservation until viewing is done, unless buyer willing to put deposit without any viewing(hope buyer will view to avoid unnecessary misunderstanding). Will be rather busy due to house cleaning, etc. Hence, arrangement of viewing will be at my convenience(got dog and baby, hence can't be too late(below 9 pm)). Got Live sand, dead sand, live rocks and dead rocks can be given FOC for scaping purpose. Should have more than enough as i will be decomm all my QT tank and transfer them to my new tank. Thanks for viewing.

Hi bro....

PM you already....for details.....

Thanks,

Tank : 3 x 2 x 1.8 ( setup end Feb 2014 ) --> 4 x 2 x 1.8 ( setup early Nov 2016 )
Skimmer : Bubble Magus NAC6 --> Bubble Magus Curve 7
Return pump : Jebao 10000l/h ( down in 17th December 2014 ) --> Jebao DC-12000 ( 19th December 2014 )
Compressor drop-in coil
Wavemaker : Tunze 6105 x 1
Lights : Modular based DIY LED light x 4

Chaeto in the sump

Link to comment
Share on other sites

hi bro, to calculate the return pump requirement, maybe you want to calculate the volume of water in your tank and sump. Then determine the replacement rate, some bro here advised 10x will be good and some think otherwise. You also need to consider the pipe sizes for your return and to sump to determine whether you can use more powerful pump. I can't sell you separately as i thought it will be good to package the deal as almost complete to benefit the buyer. However, if the buyer dont want, i can sell to you. I do have one AB5000 which i might be selling but dont know whether you can use. You can get sunny03 to advice you...lol. he is one of my masters. ...

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

  • SRC Member
hi bro, to calculate the return pump requirement, maybe you want to calculate the volume of water in your tank and sump. Then determine the replacement rate, some bro here advised 10x will be good and some think otherwise. You also need to consider the pipe sizes for your return and to sump to determine whether you can use more powerful pump. I can't sell you separately as i thought it will be good to package the deal as almost complete to benefit the buyer. However, if the buyer dont want, i can sell to you. I do have one AB5000 which i might be selling but dont know whether you can use. You can get sunny03 to advice you...lol. he is one of my masters. ...

How much u intend to sell your AB5000 for?

My Setup:

3x2x2 tank with IOS

Equipment List:

Chiller: Artica 1/5HP

Chiller Pump: Sicce 4000

Return Pump: OR3500

Skimmer: Deltec APF600

Wavemaker: Tunze Wavebox/2x Hydor K2/SCWD wavemaker

Lights: DElighting 2x150W MH + 2x 39W T5 Atinic

FR: Skimz

FR Pump: Atman AT-104

Tubby ATO, Kalkweisser Reactor with magnetic stirrer.

Link to comment
Share on other sites

Hi Bro, will be recycling this for my 4ft tank. I think Bro Reddevil is selling his. You can try to pm him.

Will u be selling off your Deltec FR? Just trying my luck.. :rolleyes:

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Hi, not sure, maybe you can offer but priority will be given to Bro Kanegan as he knows my master in reefing. Appreciate your understanding. Thanks.

How much u intend to sell your AB5000 for?

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Dear all,

Thanks for those who pmed me and showed their interests. Someone is viewing the tank later. Will inform the next in line if the buyer decided not to buy. Thanks for your attention.

p/s: Pardon my messy tank as i am housing fishes for my new tank.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

tentatively reserved by reefer after viewing. Thanks for the interests.

Tank : 4 X 2 X 2 with low iron front panel and external overflow

Skimmer : BK SM200 with waste collector

Return Pumps : Red Dragon 6m3 and Ehiem 1262

FR : 2 X Deltec 509 & powered by AB2000

Nitrate Filter : Deltec NF 509 and tee off from AB2000

Calcium R'tor : Deltec PF 501 with RM secondary chamber

Kalkwasser R'tor : Deltec KM500

Chiller : Pansonic 1 HP Compressor with 20m titanium Coil

Wave Makers : 4 X Tunze 6055 with 7096 & Vortec MP40w

Controller : GHL Profilux

Lighting : ATI Powermodule 10 or 8 tubes

Water Top-up : Water Top-Up tank powered by Tunze Osmolator

External Monitor : American Pinpoint pH and Temp. Monitor for main tank and GHL Profilux Controller to measure temp, pH, Redox

Ozonizer : Sander C50

UV : Corallife 6x

Algae Scrubbler

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...