Jump to content

brown algae


Recommended Posts

Diatoms. This is due to silicates in tapwater. If there are no silicates diatoms cannot grow. You can either:

1) Live with it.

2) Use distilled or deionised water for making your saltwater and for topping up to compensate evaporation.

Always something more important than fish.

http://reefbuilders.com/2012/03/08/sps-pico-reef/

Link to comment
Share on other sites

Diatoms. This is due to silicates in tapwater. If there are no silicates diatoms cannot grow. You can either:

1) Live with it.

2) Use distilled or deionised water for making your saltwater and for topping up to compensate evaporation.

Hi Fuel,

I'm using DI/DO water from my drinking tap for the every WC and recently there are sign of diatom appears on the sandbed. What I have done before the diatom apppears are only reducing the flow rate of the wave maker in my tank to cater for newly purchased prata.

I dun think my water contain any silicates so will be the cause of current flow is insufficent :whistle ?

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

Hi Fuel,

I'm using DI/DO water from my drinking tap for the every WC and recently there are sign of diatom appears on the sandbed. What I have done before the diatom apppears are only reducing the flow rate of the wave maker in my tank to cater for newly purchased prata.

I dun think my water contain any silicates so will be the cause of current flow is insufficent :whistle ?

Check your TDS. The DI resin might have been exhausted. Diatoms can only grow with silicates, it is their essential nutrient.

Always something more important than fish.

http://reefbuilders.com/2012/03/08/sps-pico-reef/

Link to comment
Share on other sites

Check your TDS. The DI resin might have been exhausted. Diatoms can only grow with silicates, it is their essential nutrient.

Ok. will try to buy one TDS meter to check the TDS.

post-1182-049500100201281969137_thumb.gi

Knowing is not enough; we must apply. Willing is not enough; we must do. - Goethe

Link to comment
Share on other sites

  • 2 months later...
  • 2 weeks later...
also, diatoms find it easier to grow when the water does not flow so much. your act of lowering the flow of the wavemaker could have contributed to the problem, together with the fact that your DI resin running out.

can anyone explain why is that my brown algae come and go? my situation is that when the light are on, brown algae start forming. after light off, maybe by next morning, all brown algae are almost gone? thing been going on like this for about a week. no change in water condition. or is this a nature cycle?

Link to comment
Share on other sites

  • SRC Member
can anyone explain why is that my brown algae come and go? my situation is that when the light are on, brown algae start forming. after light off, maybe by next morning, all brown algae are almost gone? thing been going on like this for about a week. no change in water condition. or is this a nature cycle?

brown algae grow very fast...within hours can cover yr sand bed....water change and reduce yr feeding....and keep cleaning yr tank walls....

l7304smr.jpg
Link to comment
Share on other sites

  • 1 month later...
  • SRC Member

will protein skimmer help to reduce the algae growth?

in a way, yes.

If a man could beat his own fantasy. Then to only breed in captivity. Then its pointless.

Genesis 1:20

And God said, Let the waters bring forth abundantly the moving creature that has life, and fowl that may fly above the earth in the open firmament of heaven. And God created great whales, and every living creature that moves, which the waters brought forth abundantly, after their kind, and every winged fowl after his kind: and God saw that it was good. And God blessed them, saying, Be fruitful, and multiply, and fill the waters in the seas, and let fowl multiply in the earth. And the evening and the morning were the fifth day.

|| Tank: 78" x 30" x 30" || Sump: 48" x 22" x 20" || Lights: PowerModule 10 X 80W|| Returns: 2 x HF32 ||

|| Skimmer: BubbleKing Supermarin 300 || Wavemaker: 3 x 6100 & 1 x 6200, 2 x Wavebox 6212, WavySea ||

|| FR: 2 x FR150 || NR: Sulphur Denitrator || CR: RM Custom Made 8" || KR: Deltec KM500 || TopUp: Tunze Osmolator 3155 ||

|| UV: Coralife 12X 36W || Ozonizer: Sanders C200|| Controller: GHL Profilux Plus II Ex ||

Link to comment
Share on other sites

in a way, yes.

kekeke.... I was about to type... indirectly yes.... hehe.....

  • Like 1

Eqpt: Deltec MCE 600, Tunze 6055 with Tunze 7091 controller, Artica 1/15 HP chiller, AquaIllumination Sol Blue LED Light System

2011 resolution : Do it simpler, better and in an easier way!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share



×
×
  • Create New...