resser Posted August 7, 2011 Share Posted August 7, 2011 opp forgot to press attach file Nice! Do you mind pm-ing me on how much this cost you? I am thinking of using 2 Nano Glo to DIY a smaller one but I am not sure if Nano-Glos would work. Quote Materialism :- He who dies with the most toys, wins. Link to comment Share on other sites More sharing options...
kusboy Posted August 7, 2011 Share Posted August 7, 2011 Nice! Do you mind pm-ing me on how much this cost you? I am thinking of using 2 Nano Glo to DIY a smaller one but I am not sure if Nano-Glos would work. Enquire from delightings regarding diying the atf...i'm diying one 3 feet atf soon...nw still making my new sump...hee Quote Link to comment Share on other sites More sharing options...
jerome9731 Posted August 30, 2011 Share Posted August 30, 2011 hi it been very long since i update about the ATS its been 10weeks months since i made my last WC decom my skimmer 1months ago( was worried at first and i did a nitrate test twice everyday for a week ,now i'm still doing but once a week) changes i made to the ATS increased the slit to about 3-4 mm upgraded the pump to ab3000 thing i noted. during the first 3 week , i don't notice much algae growth but after the 4th week the turf algae start to grow at a fast pace. seem to me there is also a so call 'break in ' period read santa monica about this part 'because weaker light will grow darker algae. Stronger light grows bright green algae, which does the most filtering' and 'Stronger lighting is always better, until you start "burning" the algae. Burned algae will be yellow, because it is getting too much light but not enough nutrients from the flow. More light requires more nutrients, which give you more filtering. So if you have yellow growth, increase the flow so that more nutrient are delivered to the algae. If you can't increase flow, then add some iron. If you can't add iron, then reduce the number of hours the lights are on. Do not reduce the wattage, however; stronger light for less hours is better than weaker light for more hours, because weaker light will grow darker algae. Stronger light grows bright green algae, which does the most filtering. ' thus i got a ab3000 pump from a reefer and try out. well picture show the 3 days worth of algae growth. just tested the parameter. NO3 0 using salifert my sump now only have filter socks for my DT outlet and my ATS outlets manual dosing of KH/MG/CAL still dosing prodibio biodigest and bioptim have to clean the acrylic once every 3 days due to salt spray but i guess i could live with the 5min maintenance i notice my KH got suck quite fast and i guessing it the ATS which doing it. increase my usual KH. my water clasrity became very clear and one of my brain showing sign of bleaching. had to locate it near to a shade planning to introduce zeovit AAHC and CV for my tank but reefdepot out of stock so for now . lovin my current setup now. Quote Link to comment Share on other sites More sharing options...
SRC Member finind Posted September 1, 2011 SRC Member Share Posted September 1, 2011 anyone using NANO-GLO LED as the light source? Quote Link to comment Share on other sites More sharing options...
les71 Posted September 2, 2011 Share Posted September 2, 2011 hi it been very long since i update about the ATS its been 10weeks months since i made my last WC decom my skimmer 1months ago( was worried at first and i did a nitrate test twice everyday for a week ,now i'm still doing but once a week) changes i made to the ATS increased the slit to about 3-4 mm upgraded the pump to ab3000 thing i noted. during the first 3 week , i don't notice much algae growth but after the 4th week the turf algae start to grow at a fast pace. seem to me there is also a so call 'break in ' period read santa monica about this part 'because weaker light will grow darker algae. Stronger light grows bright green algae, which does the most filtering' and 'Stronger lighting is always better, until you start "burning" the algae. Burned algae will be yellow, because it is getting too much light but not enough nutrients from the flow. More light requires more nutrients, which give you more filtering. So if you have yellow growth, increase the flow so that more nutrient are delivered to the algae. If you can't increase flow, then add some iron. If you can't add iron, then reduce the number of hours the lights are on. Do not reduce the wattage, however; stronger light for less hours is better than weaker light for more hours, because weaker light will grow darker algae. Stronger light grows bright green algae, which does the most filtering. ' thus i got a ab3000 pump from a reefer and try out. well picture show the 3 days worth of algae growth. just tested the parameter. NO3 0 using salifert my sump now only have filter socks for my DT outlet and my ATS outlets manual dosing of KH/MG/CAL still dosing prodibio biodigest and bioptim have to clean the acrylic once every 3 days due to salt spray but i guess i could live with the 5min maintenance i notice my KH got suck quite fast and i guessing it the ATS which doing it. increase my usual KH. my water clasrity became very clear and one of my brain showing sign of bleaching. had to locate it near to a shade planning to introduce zeovit AAHC and CV for my tank but reefdepot out of stock so for now . lovin my current setup now. frd, u got a pm Quote Link to comment Share on other sites More sharing options...
kusboy Posted September 2, 2011 Share Posted September 2, 2011 hi it been very long since i update about the ATS its been 10weeks months since i made my last WC decom my skimmer 1months ago( was worried at first and i did a nitrate test twice everyday for a week ,now i'm still doing but once a week) changes i made to the ATS increased the slit to about 3-4 mm upgraded the pump to ab3000 thing i noted. during the first 3 week , i don't notice much algae growth but after the 4th week the turf algae start to grow at a fast pace. seem to me there is also a so call 'break in ' period read santa monica about this part 'because weaker light will grow darker algae. Stronger light grows bright green algae, which does the most filtering' and 'Stronger lighting is always better, until you start "burning" the algae. Burned algae will be yellow, because it is getting too much light but not enough nutrients from the flow. More light requires more nutrients, which give you more filtering. So if you have yellow growth, increase the flow so that more nutrient are delivered to the algae. If you can't increase flow, then add some iron. If you can't add iron, then reduce the number of hours the lights are on. Do not reduce the wattage, however; stronger light for less hours is better than weaker light for more hours, because weaker light will grow darker algae. Stronger light grows bright green algae, which does the most filtering. ' thus i got a ab3000 pump from a reefer and try out. well picture show the 3 days worth of algae growth. just tested the parameter. NO3 0 using salifert my sump now only have filter socks for my DT outlet and my ATS outlets manual dosing of KH/MG/CAL still dosing prodibio biodigest and bioptim have to clean the acrylic once every 3 days due to salt spray but i guess i could live with the 5min maintenance i notice my KH got suck quite fast and i guessing it the ATS which doing it. increase my usual KH. my water clasrity became very clear and one of my brain showing sign of bleaching. had to locate it near to a shade planning to introduce zeovit AAHC and CV for my tank but reefdepot out of stock so for now . lovin my current setup now. Receive my pm bro? Quote Link to comment Share on other sites More sharing options...
jerome9731 Posted January 14, 2012 Share Posted January 14, 2012 been a while now , hi Mbmc hows your tank with ATS doing? i have stop doing any WC since i bought the ATS, have a bit of algae on the rock since i bit neglecting for a while. Cny coming so i took a few pictures. btw my ATS have some obvious warping but leak or anything. picture tell more jerome Quote Link to comment Share on other sites More sharing options...
yifen Posted April 25, 2012 Share Posted April 25, 2012 Thanks sharing Quote Link to comment Share on other sites More sharing options...
s0n1c87 Posted September 11, 2012 Share Posted September 11, 2012 This is really cool. Can I ask where to get the plastic mesh to grow the algea.? Quote Link to comment Share on other sites More sharing options...
rekian Posted November 24, 2012 Share Posted November 24, 2012 the setup is for how many feet tank? Quote Link to comment Share on other sites More sharing options...
plakat Posted December 19, 2012 Share Posted December 19, 2012 been a while now , hi Mbmc hows your tank with ATS doing? i have stop doing any WC since i bought the ATS, have a bit of algae on the rock since i bit neglecting for a while. Cny coming so i took a few pictures. btw my ATS have some obvious warping but leak or anything. picture tell more jerome hi bro can share what is zoa is that with green trimming with orange face? Quote Link to comment Share on other sites More sharing options...
qingwen Posted January 26, 2013 Share Posted January 26, 2013 how many feet is your tank? Quote Link to comment Share on other sites More sharing options...
zonerx Posted January 26, 2013 Share Posted January 26, 2013 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.